Find the magnitude of the velocity at t=30 seconds

Assignment Help Civil Engineering
Reference no: EM13533446

1.Two tangent intersect at angle of 30 degree ad 40 minute at sta 90+10 and are joined by a 4 degee 30 minute curve. using the tabla for radii and dflection distance  what is the tangent distance if the degree of curve is base on a 100-ft chord ? wich one is the right awnser  is A 349.00ft or B349.11 or  C 349.20 or D 349.50 wich one is correct

2.A motorcycle starts from rest at time t=0. The force on it from t=0to 30 seconds is F=300-9t. The combined mass of the motorcycle andthe rider is 225 kg. Use the Impulse and Momentum method to findthe magnitude of the velocity at t=30 seconds.

Reference no: EM13533446

Questions Cloud

What is the weight density of this mortar sample : A sample of mortar fills a900 ml beaker. The mortar and beaker combined weighs 3 lb and the empty beaker weighs 2 oz. What is the weight density of this mortar sample?
Determine the head-loss between points : Three pipes in a parallelsystem run between points A & B on a water distribution network delivering 400L/s. Pipe 1 is a 350 mm PVC main 4000 m long, Pipe 2 is a concrete pipe 250 m long and 80 mm in diameter
Determine the pressure at all three points in the tube : An irrigation micro-tuberises from Point A at the outlet of a supply main, up to the top of a hops trellis(Point B), before dropping down to Point C and extending on to supply an irrigation emitter.
Operated as a two-way street with parking permitted : Determine the service flow rate with a level of service B for asection of 4-lane freeway (2 lanes in each direction) with 10-ftlanes and obstructions 4 feet from the traveled pavement on oneside of the roadway. The section has a 5% grade 0.95 miles l..
Find the magnitude of the velocity at t=30 seconds : A motorcycle starts from rest at time t=0. The force on it from t=0to 30 seconds is F=300-9t. The combined mass of the motorcycle andthe rider is 225 kg. Use the Impulse and Momentum method to find the magnitude of the velocity at t=30 seconds.
The corresponding increase in the diameter of the vessel : A spherical gas container having an outer diameter of 15 ftand a wall thickness of 0.90 in. is made of a steel for whichE =29*106 psi and v = 0.29. Knowingthat the gage
Determine the corresponding height of capillary rise in soil : The void ratio of a given soil A is twice that of another soil B,while the effective size of particles of soil A is one-third thatof soil B. The height of capillary rise of water in soil A on acertain day is found to be 400 mm. Determine the correspo..
Calculate the pressure at the clay-sand interface for two : Calculate the pressure at the clay-sand interface for two cases:1) clay on top of the sand and 2) clay on the bottom of thevertical sand column.
What is the maximum torque the tube can transmit if the : A thin tube of 1/8 in thickness has a mean diameter of 6 in. What is the maximum torque the tube can transmit if the allowable normalstress in compression is 10 ksi?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Sample of natural glacial-groundwater table

A sample of natural glacial till was taken from below the groundwater table. The water content was found to be 52%. Estimate the wet density, dry density, buoyant density, porosity and void ratio. Clearly state any necessary assumptions.

  Design riveted end plated connection between beam and flange

Design a riveted end plated Connection between a beam ISHB-300 and the flange of the Column ISHB-200 to transfer a vertical factored shear of 125 kN and a factored hogging bending moment of 125kNm.Use Shop rivets of 20mm dia.

  Estimate the radon concentration in the crawl space

An exhaust system was added to provide 1 air exchange per hour (ACH) in the crawl space. The outdoor concentration of radon is 1 pCi/L. Estimate the radon concentration in the crawl spce (in pCi/L).

  Determine what is the minumum allowable pipe diamter

The mass flow rate of steam into a steam turbine is 5 kg/s . The turbine has a heat loss of 5 kj/s. if the velocity of the refrigerant is to be limited to 2 m/s, what is the minumum allowable pipe diamter

  What is the optimal distance between the two drainage canals

To avoid the salinization of soil in a farming area, parallel drainage canals are to be installed to maintain the water table at a depth of at least 4m below the ground surface. It is thought that no evapo-transpiration would occur below that dept..

  Determine the unit strain developed in the concrete

a concrete test cylinder is loaded with p= 100k (445 kn) and resulting shortening of 0.036" (0.0914 mm). determine the unit strain developed in the concrete.

  Estimate liquid volume of an aeration tank required to treat

Estimate the liquid volume of an aeration tank (units of m^-3) required to treat the following wastewater to a BOD effluent standard of 30.0 mg L^-1 and a suspended solids effluent standard of 30 mg L^-1.

  Calculate what is the volume of rock in the rock pile

A storage pile of crushed rock is 100ft by 100ft square at its base and 50 ft by 50 ft square on the top. The pile is 25 ft high. What is the volume of rock in the rock pile

  What will be the concentration of tce in the aqueous phase

The dimensionless henry's constant for TCE at 25 degrees celsius is 0.4. A sealed glass vial is prepared that has an air volum of 4mL overlying an aquesous volume of 36mL.

  Draw internal shear force and bending moment for the beam

The overhang beam has been fabricated with a projected arm BD on it. Draw the internal shear force, bending moment, and normal force diagrams for the beam ABC if it supports a load of 800 lb.

  Determine was the pavement wet or dry

The driver of a car traveling up a 2% grade at an initial speed Vo applied the brakes abruptly and the vehicles slid to a complete stop at an average deceleration of 8 ft/s^2. Was the pavement wet or dry

  Design a curve for highway by stationing of the pc and pt

A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd