### Find the heat transfer from the refrigerant per unit mass

Assignment Help Basic Computer Science
##### Reference no: EM131276387

1. Steam enters a long, horizontal pipe with an inlet diameter of D1 = 16 cm at 2 MPa and 300°C with a velocity of 2.5 m/s. Farther downstream, the conditions are 1.8 MPa and 250°C, and the diameter is D2 = 14 cm. Determine

(a) the mass flow rate of the steam and

(b) the rate of heat transfer.

2. Refrigerant-134a enters the condenser of a refrigerator at 900 kPa and 60°C, and leaves as a saturated liquid at the same pressure. Determine the heat transfer from the refrigerant per unit mass.

#### Determine the required length of the parabolic collector

If solar energy is transferred to water at a net rate of 400 Btu/h per ft length of the tube, determine the required length of the parabolic collector to meet the hotwater r

#### Find the power rating of the electric heater

A 4-m 3 5-m × 6-m room is to be heated by an electric resistance heater placed in a short duct in the room. Initially, the room is at 15°C, and the local atmospheric pressur

#### Determine the inlet and exit velocities of the air

Steam enters a nozzle with a low velocity at 150°C and 200 kPa, and leaves as a saturated vapor at 75 kPa. There is a heat transfer from the nozzle to the surroundings in th

#### Calculate velocity of nitrogen at pipe''s inlet and outlet

Steam enters a long, insulated pipe at 1200 kPa, 250°C, and 4 m/s, and exits at 1000 kPa. The diameter of the pipe is 0.15 m at the inlet, and 0.1 m at the exit. Calculate t

#### Determine the rate of heat transfer from the refrigerant

A steam turbine operates with 1.6 MPa and 3508C steam at its inlet and saturated vapor at 30°C at its exit. The mass flow rate of the steam is 22 kg/s, and the turbine produ

#### Determine the total heat transfer for this process

Heat is transferred to the refrigerant such that the pressure inside the tank remains constant. The valve is closed when the last drop of liquid in the tank is vaporized. De

#### Determine the electrical work done during this process

The air temperature during this process is maintained constant by an electric resistance heater placed in the tank. Determine the electrical work done during this process.

#### Determine the final temperature in the cylinder

A vertical piston-cylinder device initially contains 0.25 m3 of air at 600 kPa and 300°C. A valve connected to the cylinder is now opened, and air is allowed to escape until