Find the final temperature and find the process work

Assignment Help Civil Engineering
Reference no: EM13309740

A constant pressure container is filled with 1 kg of stainless steel and 0.5 kg of PVC (polyvinyl chlo- ride) both at 20C and 0.25 kg of hot air at 500 K, 100 kPa. The container is now left alone with no external heat transfer. a. Find the final temperature. b. Find the process work.

Reference no: EM13309740

Questions Cloud

Identify the strengths and weaknesses of this study : Identify the strengths and weaknesses of this study?
Determine volume of reactor needed for each hydraulic regime : The kill of pathogens by disinfection in water treatment can be described by a first order reaction. Complete a reactor comparison for a batch reactor, CSTR and PFR for disinfection. The treatment plant produces 100 L/s of water.
Depict qualitative pv graph and show the path of the process : ethanol vapor at 0.5 bar and 78 degrees celcius is compressed isothermally to 2 bar in a reversible process in a closed system a) draw a qualitative PV graph and show the path of the process.
Determine the height of the weir p and the weir length : The discharge range is 0.1 to 1.0 cfs. The maximum approach flow depth is 18 inches. Determine the height of the weir P and the weir length l in the flow direction. Assume cv =1.
Find the final temperature and find the process work : A constant pressure container is filled with 1 kg of stainless steel and 0.5 kg of PVC (polyvinyl chlo- ride) both at 20C and 0.25 kg of hot air at 500 K, 100 kPa. The container is now left alone with no external heat transfer.
Explain equilibrium the forward rate constant drops : Select all of the correct statements about equilibrium from the choices below. At equilibrium the rates of forward and reverse reactions are equal. As a reaction proceeds forward toward equilibrium the forward rate constant drops.
The film diary conference : View at least FOUR of the following Westerns and document them (with at least a substantive paragraph or two, 100 words minimum, excluding film credits) in the Film Diary Conference:
Determine the acceleration of an air particle on the x-axis : The velocity of flow toward the sphere along the longitudinal axis is found to be u = - U0 (I - r~/_xl), where r0 is the radius of the sphere and x the distance from its center.
Modus ponens and one in the form of modus tollens : Write two arguments in English, one in the form of modus ponens and one in the form of modus tollens. Then, write the arguments in symbols using sentence letters and truth-functional connectives. (If your computer does not have all the symbols needed..

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Write computer code using matlab that emoloyes the nelder

write computer code using Matlab that emoloyes the nelder and mead simplex method to solve the welded-beam design (benchmark problem

  Estimate the peak flood tidal flow velocity at the location

As a tide enters a river and propagates upstream, the water depth at a given location is 3.7m . At this location the tide range is 1m . If the dominant tidal compeonent has a period of 12.4 hours, estimate the peak flood tidal flow velocity at thi..

  What must be the standard deviation

A distance of 1000 feet is to be taped in a manner to ensure a standard deviation smaller than ±0.06 feet. What must be the standard deviation per 100-ft tape length to achieve the desired precision?

  Determine the speed of the car when time t is given

The 1.2-Mg mine car is being pulled by winch M mounted on the car. If the winch generates a constant power output of 30 kW, and the car starts from rest, determine the speed of the car when t = 5s.

  Estimate the aqueous concentration of pce in water

Consider tetrachloroethene (PCE) in water. The vapor pressure of PCE is 0.0251atm. Henry's constant for PCE at 25°C is 26.9 atm-L/mol. Estimate the aqueous concentration of PCE in water at equilibrium

  What additional information would need to calculate stress

The bar under the applied force is now 2.448 meters long. Calculate the following for the bar: a) engineering stress, b) engineering strain, c) true strain, d) Young's modulus, e) What additional information would you need to calculate the true st..

  How much will each leg shorten under the applied

given that E for the tube material is 70 GN/m2 and the stool legs are 75cm long, how much will each leg shorten under the applied compressive load (take g = 9.8m/s2)

  What should be the surface area of the lagoon

If the evaporation rate from an open water surface is 0.27 inch/day in Tucson Arizona, what should be the surface area of the lagoon? (Note: arsenic does not evaporate but remains in the liquid water)

  Find the moment of inertia and natural frequency of pipe

Find the moment of inertia and natural frequency of a vertical cantilever pipe 12 feet tall with outer diameter of 4.5 inches and an inner diameter of 4.25 inches. Modulus of Elasticity = 10*10^6 Mass = 50 lbs.

  Will the pce standard of 5 microgram per l be exceeded

If an 18.9 L (5 gallon) bucket of PCE is released (and equally distributed) into a 3.79x10^8 L (100,000,000-gallon) aquifer, will the PCE standard of 5 microgram/L under the Safe Drinking Water Act be exceeded

  Compute the flexural strength of the load at fracture

A three-point bending test is performed on a glass specimen having a rectangular cross section of height d=5mm and width b=10mm; the distance between support points is 45mm.

  Calculate for the water contained in the tank the volume

Water in the amount of 1 lb is contained in a rigid closed tank. Initially the water has a quality of 0.4 at a pressure of 10 lbf/in2. Through a stirrer, work is provided to the water in the tank until the pressure quadruples.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd