Find the electrical power produced by a stack

Assignment Help Mechanical Engineering
Reference no: EM13947620

Single fuel cells such as the one of Example 1.5 can be scaled up by arranging them into a fuel cell stack. A stack consists of multiple electrolytic membranes that are sandwiched between electrically conducting bipolar plates. Air and hydrogen are fed to each membrane through ow channels within each bipolar plate, as shown in the sketch. With this stack arrangement, the individual fuel cells are connected in series, electrically, producing a stack voltage of Estack = Ec, where Eis the voltage produced across each membrane and is the number of membranes in the stack. The electrical current is the same for each membrane. The cell voltage, Ec, as well as the cell efficiency, increases with temperature (the air and hydrogen fed to the stack are humidified to allow operation at temperatures greater than in Example 1.5), but the membranes will fail at temperatures exceeding = 85°C.  Consider  w  membranes,  where = 100 mm, of thickness t= 0.43 mm, that each produce E= 0.6 V at = 60 A, and Ec,= 45 W    of thermal energy when operating at = 80°C. The exter- nal surfaces of the stack are exposed to air at T00 = 25°C and surroundings at Tsur = 30°C, with = 0.88    and = 150 W/m2 · K.

(a) Find the electrical power produced by a stack that is Lstack = 200 mm long, for bipolar plate thickness in the range 1 mm tbp 10 mm. Determine the total thermal energy generated by the stack.

(b) Calculate the surface temperature and explain whether the stack needs to be internally heated or cooled to operate at the optimal internal tempera- ture of 80°C for various bipolar plate thicknesses.

(c) Identify how the internal stack operating tempera- ture might be lowered or raised for a given bipolar plate thickness, and discuss design changes that would promote a more uniform temperature distrib- ution within the stack. How would changes in the external air and surroundings temperature affect your answer? Which membrane in the stack is most likely to fail due to high operating temperature?

Reference no: EM13947620

Questions Cloud

What are the stages of the ccm. what happens at each stage. : Research and relate how the CMM improved the software development processes of a particular company.
Derive an expression for force as a function of bar length : Derive an expression for the force as a function of bar length y if the length and cross section before deformation are yo and αo2 respectively.
What is the current price of the bond : ABC Corp. issued a 12 percent, 20 year coupon rate bond 5 years ago. Interest rates are now 8 percent. The par value of the bond is $1,000. Based on semi-annual analysis, what is the current price of the bond?
Find the electrical power produced by a stack : Find the electrical power produced by a stack that is Lstack = 200 mm long, for bipolar plate thickness in the range 1 mm tbp 10 mm. Determine the total thermal energy generated by the stack.
Ratio that liquidity-solvency and profitability : When reviewing the financial statements of a company, there are many different ratios to choose from. Choose a ratio that looks at liquidity, solvency and profitability and discuss its importance.
What is data warehousing.what are xml databases. : Do you believe data warehousing is a fad or a "real" technology which will benefit organizations?
Creditor is interested in short-term cash flow : Investors and creditors are typically not interested in the same thing. Investors are typically interested in whether a company is going to turn a profit over time, while a creditor is interested in short-term cash flow. Decide whether you are an inv..
Effect of the gap distance on the heating process : The initial time rate of change in the temperature of the wafer, (dTw /dt)i, is also of interest. Approximating the surfaces of the hot  plate and the wafer as blackbodies and assuming their diameter transfer modes and the effect of the gap distan..

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  A tank of 50 cubic feet contains saturated ammonia at 100 f

a tank of 50 cubic feet contains saturated ammonia at 100 f and a quality of 50. vapor is withdrawn from the top of the

  Find the maximum velocity in the tube

Water at 27 C flows through a tube of diameter d = 50 mm. If the flow is fully-developed and has a mass flow rate of 0.01 kg/s, find the maximum velocity in the tube, and the pressure gradient, dp/dx

  Calculate the number of vacancies per cubic meter in some

calculate the number of vacancies per cubic meter in some metal at 689degc. the energy for vacancy formation is 0.75

  Calculate the work done by the gas on the piston

energy is added to a piston cylinder arrangement, and the piston is withdrawn in such a way that the quantity PV remains constant. the initial pressure and volume are 200kpa and 2m3, respectively. the final pressure is 100kpa, calculate the work d..

  Describe the theory used for the izod test

Describe the theory used for the IZOD test and what units are used to report toughness? Explain the change in magnetic properties when steel is heated. Is this due to allotropic properties?

  Determine the dimentionless parameters that characterize

determine the dimentionless parameters that characterize the average velocity of the flow in a smooth pipeline if the

  Survey of industry representatives conducted

A survey of industry representatives conducted by the National Society of Professional Engineers indicated the #1 area in which more coursework was called for was:

  Assume no slipping of the cylinder and determine the

a cord is wound in the slot of cylinder a. mass b moves downward with a velocity of 6 m. assume no slipping of the

  Building a multi-project battalion by leading upward

Read the case study titled "A Peaceful Evacuation: Building a Multi-Project Battalion by Leading Upward." before starting this assignment.

  The capacity ratio k in the compressor and turbine is 14

in a gas turbine operating at a steady state air enters the compressor with a mass flow rate of 5 kgs at .95 bar and 22

  A high school project involves building a model ultralight

a high school project involves building a model ultralight airplane. some of the stu- dents propose making an airfoil

  Find the mass of the gas remaining in the cylinder

An ideal gas contained in a cylinder with a volume of 500m3 is at a pressure of 400Kpa and a temperature of 70 ?C . Pressure in the cylinder is dropped to 200KPa by releasing some gas. If the expansion process of the cylinder is isentropic, find the ..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd