Find the efficiency of the transformer

Assignment Help Chemical Engineering
Reference no: EM131113818

A single-phase, 10-kVA, 2300:230-V, 60-Hz, two-winding distribution transformer is connected as an autotransformer to step up the voltage from 2300 V to 2530 V.

(a) Draw a schematic diagram of the arrangement showing all the voltages and currents while delivering full load.

(b) Find the permissible kVA rating of the autotransformer if the winding currents are not to exceed those for full-load operation as a two winding transformer. How much of that is transformed by electromagnetic induction?

(c) Based on the data given for the two-winding transformer in Problem 11.4.1, compute the efficiency of the autotransformer corresponding to full load and 0.8 lagging power factor. Comment on why the efficiency of the autotransformer is higher than that of the two-winding transformer.
Problem 11.4.1

These data were obtained from tests carried out on a 10-kVA, 2300:230-V, 60-Hz distribution transformer:

• Open-circuit test, with low-voltage winding excited: applied voltage 230 V, current 0.45 A, input power 70 W

• Short-circuit test, with high-voltage winding excited: applied voltage 120 V, current 4.35 A, input power 224 W

(a) Compute the efficiency of the transformer when it is delivering full load at 230 V and 0.85 power factor lagging.

(b) Find the efficiency of the transformer when it is delivering 7.5 kVA at 230 V and 0.85 power factor lagging.

(c) Determine the fraction of rating at which the transformer efficiency is a maximum, and calculate the efficiency corresponding to that load if the transformer is delivering the load at 230 V and a power factor of 0.85.

(d) The transformer is operating at a constant load power factor of 0.85 on this load cycle: 0.85 full load for 8 hours, 0.60 full load for 12 hours, and no load for 4 hours. Compute the transformer's all-day (or energy) efficiency.

(e) If the transformer is supplying full load at 230 V and 0.8 lagging power factor, determine the voltage regulation of the transformer. Also, find the power factor at the high-voltage terminals.

Reference no: EM131113818

Questions Cloud

Summarize a criminal case involving an internet predator : Conduct research and summarize a criminal case involving an internet predator. Be sure and address what type of sexual offender this case involved
Develop a per-phase equivalent circuit : Determine the primary current, primary voltage, and power factor.
Job filed a lawsuit against the newspaper : Based on the information provided, determine if there is any adver se impact against Hispanics or African - Americans in the hiring of CSRs. Assuming an Hispanic and an African - American applicant who were not hired for the job filed a lawsuit again..
Describe the types of misconduct by community corrections : In a 2-3 page, APA style paper, describe the types of misconduct by community corrections professionals and provide some of the explanations for this misconduct
Find the efficiency of the transformer : Find the efficiency of the transformer when it is delivering 7.5 kVA at 230 V and 0.85 power factor lagging.
Determining the compensatory time off : Terri works at Timmy's Toy Factory on the assembly line. She has been designated as "Assistant Manager." The majority of her time is spent demonstrating how to assemble the toys to the new employees on the line.
How function can be applied to coatesville fire case : Describe how the function can be applied to the Coatesville Fire Case. The four functions of probation/parole work include the following: Presentence investigations and Intake procedures
How gender have influenced the communication within family : Distinguish how gender may have influenced the communication within your family. How about birth order (youngest, middle, oldest, only)? Other factors?
Inventoriable costs in your audit of garza company : Merchandise costing $73,000 shipped by a vendor f.o.b. destination on December 30, 2010, and received by Garza on January 4, 2011.

Reviews

Write a Review

Chemical Engineering Questions & Answers

  Value and direction of a single resultant force

Determine mathematically the value and direction of a single resultant force which when acting upon the plate shown below would effectively replace the forces shown.

  Finding the heat of reaction

Finding the Heat of Reaction (Enthalpy) from Heats of Formation

  Valuable product froman effluent gas stream

Preliminary design work has been done on a process to recover a valuable product froman effluent gas stream. The gas will be scrubbed with a solvent in a packed column;the recovered product and solvent separated by distillation; and the solvent co..

  What is the maximum profit obtainable per pound of chemical

Chemical X costs $0.09 per pound. Chemical Y costs $0.04 per pound. Chemical Z sells for $0.80 per pound. If one-half of the selling price for chemical Z is due to costs other than for raw materials, what is the maximum profit obtainable per pound..

  Calculate the work for the gas compression

Consider the following cyclic process carried out in two steps on a gas: Step 1: 45 J of heat is added to the gas, and 10. J of expansion work is performed. Step 2: 60. J of heat is removed from the gas as the gas is compressed back to the initial..

  Thermosetting polymers at room temperature

Which of the following would you expect to be elastomers and which thermosetting polymers at room temperature? Justify each choice.

  Producing a precipitate of fe

A mixture contains only NaCl and Fe(NO3)3. A 0.456-g sample of the mixture is dissolved in water, and an excess of NaOH is added, producing a precipitate of Fe(OH)3. The precipitate is filtered, dried, and weighed. Its mass is 0.107 g.

  Radioactivity is a tendency for an element or a material

1- Radioactivity is a tendency for an element or a material to ________. emit decay radiation emit light

  Design a condenser for the duty

Design a condenser for the following duty: 45,000 kg/h of mixed light hydrocarbon vapors to be condensed. The condenser is to operate at 10 bar. The vapor will enter the condenser saturated at 60 °C and the condensation will be complete at 45 °C.

  Compute the power factor for zero voltage regulation

Compute the power factor for zero voltage regulation on full load.

  Question 1 a using appropriate data sources to be cited

question 1 a using appropriate data sources to be cited correctly make a reasonably accurate sketch or graph of a

  Develop a project plan and schedule of tasks

You are the project manager of a team that has been asked to complete the design of a chemical plant up to the stage of design selection. You have three engineers available (plus yourself) and the work must be completed in ten weeks. Develop a pro..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd