Find the deflection at the free end caused by the beams own

Assignment Help Civil Engineering
Reference no: EM13549185

A cantilevered W12X136 (ASTM-A36) steel member beam is 18 feet in length. if a concentrated load of 12 kips is applied at a point 6.25 feet from the beam's free end, use the superposition technique to find:

a. the deflection at the free end caused by the beams own weight.

b. the deflection of the free end caused by the concentrated load.

c. the total deflection due to the two weights.

Reference no: EM13549185

Questions Cloud

Explain what are the possible values of n and m : What are the possible values of n and m/ (the principal and angular momentum quantum numbers) for an electron in a 5d orbital
Define how and why the aqueous solubility for phenol differ : Explain how and why the aqueous solubility(Cw,sat) and vapor pressure (Pv) for phenol differs when its pure natural state only ( non aqueous phase liquid [NAPL] vs. a mixed NAPL solution that contains 20% naphthalene and 80% phenol?
What must the hydraulic detention time be in the aeration : A perfectly mixed aeration pond with no recycle (return line) serves as the biological reactor for a small community. The pond receives 30 cubic meters/day of influent with a BOD5 of 350 mg/L that must be reduced to 20 mg/L before discharge.
Define sea level to the top of the atmosphere : Sea-level atmospheric pressure is approximately 14.7 pounds per square inch. From this fact, we can deduce that a column of air one square inch in cross-section, measured from sea level to the top of the atmosphere
Find the deflection at the free end caused by the beams own : A cantilevered W12X136 (ASTM-A36) steel member beam is 18 feet in length. if a concentrated load of 12 kips is applied at a point 6.25 feet from the beam's free end, use the superposition technique to find
Explain what mass of oxygen would be required to convert : A sample of 13 g of nitrogen can be combined with 14.857143 g of oxygen to form nitric oxide gas (NO). What mass of oxygen would be required to convert the same sample of nitrogen to nitrogen dioxide (NO2) instead
What would be the salt concentration be in the brine : A reverse osmosis plant desalinates 5*10^6 L/day of feedwater containing 1500 mg/l of salt, yeilding 3*10^6L/day of product water with 75 mg/l of salt. What would be the salt concentration be in the brine?
Find the mass of water that has been frozen into ice : A 0.250-kg piece of aluminum that has a temperature of -158 °C is added to 1.4 kg of water that has a temperature of 2.6 °C. find the mass of water that has been frozen into ice
Explain hydrogen-like atom in the ground-state : If a hydrogen-like atom in the ground-state is excited with a wavelength of 397.21nm, how much energy has been absorbed. Which shell is the electron excited to

Reviews

Write a Review

Civil Engineering Questions & Answers

  What thickness of hma would be required to carry the same

What thickness of HMA would be required to carry the same traffic (computed in B) if there is a loss of serviceability due to frost heave of 0.8? Assume that the thickness other two layers would not be changed.

  Calculate what is the volume of rock in the rock pile

A storage pile of crushed rock is 100ft by 100ft square at its base and 50 ft by 50 ft square on the top. The pile is 25 ft high. What is the volume of rock in the rock pile

  What is the mass flow rate of the refrigerant in kg per s

A vapor-compression refrigeration system, using Refrigerant 134a as the working fluid, has evaporator and condenser pressure of 1.4 bar and 12 bar, respectively.

  Find the magnitude of the velocity at t seconds

A motorcycle starts from rest at time t=0. The force on it from t=0to 30 seconds is F=300-9t. The combined mass of the motorcycle andthe rider is 225 kg.

  What is the ph of the solution

What is the pH of the solution created by combining 0.90 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)?

  Calculate the force on the levee gates form storm surge

Higher water level inside the eye, combined with wind results in a "storm surge". Calculate the force on the levee gates form storm surge 20 feet above level of the lake traveling at about 25 ft/sec.

  Calculate the flow rate in the pipe between the reservoirs

Two reservoirs are connected by a pipeline. The pipeline is 1 m in diameter and has a friction factor of 0.03. The elevation difference between the reservoirs is 30 m. The two reservoirs are 5 km apart.

  What can be concluded about the work load for the worker

At the morning break, an industrial engineer quickly measures the worker's heart rate and finds a peak value of 110 beats/min one minute after stopping work and a value of 95 beats/min three minutes after stopping work.

  Determine the specific weight of wood above water surface

a solid wooden cube (.5*.5*.5 m^3) is floating in water and 0.2 of the cube extends above the water surface. Determine the specific weight of the wood.

  Estimate the supply pressure required at the flow rate

Water, at volume flow rate Q=20 L/s, is delivered by horizontal fire hose and nozzle assembly. The hose (L = 100m, D = 75 mm, and e/D = .004) is made up of five 20 m sections joined by couplings

  Determine the discharge for shock-less entry

A centrifugal water pump has an impeller with r1 = 4", r2 = 12", f1 = 160°, f2 = 170°. The impeller is 2" wide at the inlet end and ¾" at the outlet. For a speed of 1800 rpm, neglecting losses and vane thickness

  Find the value of k

time(in months) after a computer of brand is sold and needed repair is normally distributed with mean 36 months and standard deviation 4 month. if 1% of the super computer need services less than k months after they are sold, find the value of k.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd