Find the bottom width and the depth of water channel

Reference no: EM13564971

1.The rate of flow through a trapezoidal open channel is 20 m^3/s and the mean velocity of flow is m/s . the side slope is 1:1 and the bed slope is 1 in 5000. Assume Chezy's constant C as 60, find the bottom width and the depth of water channel.

2.A simply supported beam carries with a span of 7.5 m carries a uniformly distributed load of 25 N/mm. if the maximum allowed deflection of the beam is 1/325 of its span, detemine the cross-sectional dimensions of the beam. assume the beam has a rectangular cross-section with an aspect ratio of 4. verfiy your design against defection?

Reference no: EM13564971

Questions Cloud

Find the discharge and froude number when the total depth : The bottom of a triangular channel is designed to be the best hydraulic section for critical flow at a depth of 1.25m; the sidewalls above the bottom section are vertical and the same width as the triangular section.

What is the annual worth of this investment : Carlisle Company has been cited and must invest in equipment to reduce stack emissions or face EPA fines of $18,500 per year. An emission reduction filter will cost $75,000 and have an expected life of 5 years. Carlisles MARR is 10 percent/year.

What amount will you be able to withdraw each year : At a specified point on a highway, vehicles are known to arrive according to a Poisson process. Vehicles are counted in 20-s intervals, and vehicle counts are taken in 120 of these time intervals. It is noted that no cars arrive in 18 of these 120 in..

Calculate the drawdown at the well : A gravel-packed well with an effective diameter of 36 in is to be constructed in an aquifer with T = 2.6 x l04 gpd/ft and S = 2.3 x 10-5. The design flow of the well is 1000 gpm. Calculate the drawdown at the well

Find the bottom width and the depth of water channel : A simply supported beam carries with a span of 7.5 m carries a uniformly distributed load of 25 N/mm. if the maximum allowed deflection of the beam is 1/325 of its span, detemine the cross-sectional dimensions of the beam. assume the beam has a recta..

Determine the initial temperature and total enthalpy in the : A 10 kg of refrigerant R-134a at 300 kPa fills rigid container whose volume is 14 L. The container is then heated until the pressure is 600 kPa.

What is the mean time between counts : Suppose the counts recorded by a Geiger counter follow a Poisson process with an average of three counts per minute.

Find the bottom width and the depth of water channel : The rate of flow through a trapezoidal open channel is 20 m^3/s and the mean velocity of flow is 1m/s . the side slope is 1:1 and the bed slope is 1 in 5000. Assume Chezy's constant C as 60, find the bottom width and the depth of water channel.

Determine the thickness of the oil film assuming a linear : A solid cube with a side length of 0.4 ft and a weight of 110 lb slides down a smooth surface that is inclined at 45 degrees to the horizontal. The block slides on a film of oil with a viscosity of 1.85 x 10-2 lb-s/ft2. If the velocity of the block i..

User Account

All Pages