Find magnitude of ground displacement and energy released

Assignment Help Civil Engineering
Reference no: EM13322445

An earthquake with a magnitude 6.5 on the Richter scale is producing a ground displacement of 50 mm at a particular location and the energy released by the earthquake is "E". Determine the magnitude of ground displacement and energy released if an earthquake with a magnitude of 8.5 hits the same location

Reference no: EM13322445

Questions Cloud

What is the critical state angle of friction of the soil : The soil undergoes shear failure and reaches critical state on this plane when the pore-water pressure is increased to 120 kPa while keeping the total normal and shear stresses constant.
Determine the deflection at the mid span of a simple beam : Determine the deflection at the mid span of a simple beam (wood joist) of a row house. The joist is designed as 2x12@16'' for DL = 12psf and LL=40 psf. The span length of the joist is 18'
Explain substance x is an element which has the elemental : The substance X is an element which has the elemental form of X(s) at 25oC. The standard enthalpy of formation of HXO4(g) is -818.0 kJ/mol at 25oC. The standard entropy of HXO4 (g) and X(s) are, respectively 175.8 J/mol•K and 30.70 J/(mol•K) at 25..
What is the thickness in mm of the paint on the wall : one gallon of paint(volume=3.78 x 10^ -3) covers an area of 25 m^2. what is the thickness in mm. of the paint on the wall
Find magnitude of ground displacement and energy released : An earthquake with a magnitude 6.5 on the Richter scale is producing a ground displacement of 50 mm at a particular location and the energy released by the earthquake is "E".
What fundamental frequency he will it produce : A certain organ pipe, open at both ends, produces a fundamental frequency of 252Hz in air. what fundamental frequency f He will it produce
Five different well-diversified portfolios of risky assets : You are evaluating various investment opportunities currently available and you have calculated expected returns and  standard deviations of five different well-diversified portfolios of risky assets:
Write the structural vhdl code to implement device : Two voltage and two current sensors indicate measured voltage with 16-bit binary values on their output lines, S15 to S0.
Explain what is the total pressure in the vessel : What is the partial pressure of SO2(g) in the larger container. What is the partial pressure of N2(g) in this vessel. What is the total pressure in the vessel

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the minimum required depth of the beam

A simply supported beam (one end has a pin support and the other a roller support) is 10 ft long. The width of the beam is 3.5 in. The beam supports three concentrated loads

  Determine the adequacy of steel beam to support uniform load

determine the adequacy of W16x40(A-36) of steel beam that supports a uniform load of 800 pounds per foot over a span of 30 feet

  Find what is the stretch of the 360 cable under the load

What is the maximum load that a .75" diameter steel cable can hold if the UTS of the steel is 145,000 PSI and a safety factor of 1.5 is required.What is the stretch of the 360" cable under this load

  What is the safety factor used if the structure was designed

Link BC is 6 mm thick, has a width w= 25 mm, and is made of a steel with a 480 MPa ultimate strength in tension. What is the safety factor used if the structure was designed to support a 16 kN load P

  When will drivers be able to see the full sign

A roadway has a 4% grade intersecting a -7% grade at at station 18+50.00. The grades are connected by an 800 foot vertical curve. A sign is proposed to be installed at Station 15+00.00. The bottom of the sign is 7 feet above the roadway.

  Calculate total mass emissions of particulates out of steck

The temperature in the stack is 300 F and the pressure is 725 mm Hg. If the total flow rate of gas out of the stack is 190 standard cubic meters per second, calculate the total mass emissions of particulates out of the stack in kg/day.

  Estimate shaft elongation in millimeters with applied force

A 4.00-cm-diameter, 0.80-m long rod of aluminum 7075-T6 is subjected to an axial tensile force with a factor of safety of 1.75. The yield stress and modulus of elasticity of aluminum 7075-T6 are 500. MPa and 210. GPa, respectively.

  Define overview of why the construction business can fail

The New Jersey Surety Association, in various documented publications discusses the Surety's relationship with their clients, the best way to better know your Surety and a brief overview of why the Construction Business can fail.

  Determine the location where a hydraulic jump forms in flat

A rectangular open channel with a width of 10 ft and n = 0.013 conveys a discharge of 300 cfs. The upstream portion of the channel has a slope of 10%, which then abruptly changes to a slope of zero downstream.

  Calculate the size of the mass m so that block a slides

The 2kg block A and the 5kg block B are initially at rest on the inclined plane at 20 degrees. All surfaces in this system have a coefficient of static friction of 0.6 , and a coefficient of kinetic friction of 0.4.

  Determine the stoichiometric oxygen requirement for fuel

Determine the Stoichiometric oxygen requirement (pounds of oxygen per pound of fuel) for a fuel containing by weight 50% n-octane,25% 1-heptene and 25% methanol.

  What percentage of the hexane entering the condenser

A gas stream contains 18.0 mole% hexane and the remainder nitrogen. The stream flows to a condenser, where its temperature is reduced and some of the hexane is liquefied. The hexane mole fraction in the gas stream leaving the condenser is 0.0500.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd