Find area that array of solar cells would need to power

Assignment Help Civil Engineering
Reference no: EM13313781

Assume that a gallon of gas contains 114,000 BTUs of energy and that a brilliant engineer has created an 80 percent efficient solar cell. Find the area (in square smoots and in square feet) that an array of these solar cells would need to power the average car (3 gallons of gas per hour). Use 1.361 as the value for the solar constant. You will need to google "solar constant" to obtain the correct units.

Reference no: EM13313781

Questions Cloud

Determine all reactions and draw shear and moment diagrams : Analyze the frame by moment distribution. Determine all reactions and draw the shear and moment diagrams, locating points of inflection and labeling max and min shear and moment values.
Explain what is the molar concentration of hcl : 10.0 mL sample of aqueous HCL requires 32.34 mL of 0.108 M NaOH to reach the endpoint. What is the molar concentration of HCL. the equation for reaction is NaOH+HCl ..... NaCl + H2O
Determine te maximum normal stress in the container : A spherical gas container made of steel has a 5-m outer diameter and a wall thickness of 6 mm. Knowing the internal pressure is 350 kPa, determine te maximum normal stress and the maximum shearing stress in the container.
What would the horizontal distance between the two point be : The terrain in the in the immediate area does not allow for level measuring area. if the suveyour verifiies the diffence in elevation between the point measured from. and the point measured to, as 8.93 feet,
Find area that array of solar cells would need to power : Assume that a gallon of gas contains 114,000 BTUs of energy and that a brilliant engineer has created an 80 percent efficient solar cell. Find the area (in square smoots and in square feet) that an array of these solar cells
What is the acceleration of the boat : A boat moves through the water with two forces acting on it. One is a 2149 N forward push by the motor on the propeller, What is the acceleration of the 1156 kg boat
Study on managing the software enterprise : This course is for those in a management capacity, or those interested in management, involving the strategic consideration of software acquisition, development and project management.
Explain the dissociation equation when the ionic compounds : Using the table of polyatomic ions, write the correct chemical formula for the following ionic compound. Use the Solubility Rules to write the dissociation equation when the ionic compounds are placed in water.
Establish control limits for sample means : Design an R- and an 1-chart for this process and the results from the last 5 samples of 10 packets are

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine what is the thermal stress generated in the rod

The ¼" thick 6061?T6 aluminum bar is subjected to a tensile force of P = 5 kips. b = 4"; c = 1.5"; d = 2.5"; and the fillet radii are 1". a) Determine the maximum stress in the bar. b) What is the lateral strain in the 1.5" wide section

  Compute moment of the force about a line through origin

The force F = 90i + 60j + 20k acts at the point (0,0,40). Compute the moment of the force about a line through the origin that has direction cosines (1/sqrt(3), 1/sqrt(3), 1/sqrt(3), 1/sqrt(3)).

  Determine which process requires more energy at atm pressure

Which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure or completely vaporizing 1 kg of saturated liquid water at 8 atm pressure

  Determine additional width l required for all the parameters

The canal shown below is to be widened so that it can carry twice the amount of water. Determine the additional width L required if all other parameters (i.e. flow depth, bottom slope, surface material, side slope) are to remain the same.

  How many loom operators should be employed to minimize cost

A room has 10 cotton spinning looms. Once the looms are set up, they run automatically. The setup time is exponentially distributed, with mean 10 minutes. The machines run for an average of 40 minutes, also exponentially distributed.

  Determine the gram molecular weight of the air

given a 22.414 liter volume of air at STP containg: 21.224kPa oxygen, 79.119 kPa nitrrogen, 0.946kPa argon,and 0.036 k carbondioxide. Find the gram molecular weight of the air.

  What is the total delay per cycle and delay per vehicle

A left-turn movement has a maximum arrival rate of 200 veh/h. The saturation flow of this movement is 1400 veh/h. For this approach, the yellow time is 4 seconds, all red time is 2 seconds and total lost time is 3 seconds.

  Volume of the lake

Suppose that the distance from the lake outlet to the withdrawal cannot be more than 20 mi. What should be the new volume of the lake?

  Calculate the major friction head loss for 24 inch diameter

Using darcy-weisbach equation, calculate the major friction head loss for a 24 inch diameter, 120 ft long pipe that can carry water with a flow rate of 5 cfs. Assume the temperature of water is 70 deg F and the roughness of the pipe is 0.0016 ft.

  Determine the maximum detector spacing by drawing

Imagine a virtual expressway having 3 lanes. The administrating agency wants to detect traffic accidents in 5 minutes wherever they occur to dispatch an emergency response unit.

  Embankment for a highway

An embankment for a highway 30m wide & 1.5m in a compacted thickness is to be constructed from a sandy trucked from a borrow pit. the water contenet of the sandy soil in the borrow pit is 15%& its void ratio is 0.69.

  Determine what is the departure of the course

A course has true azimuth of 157 degrees 15 minutes and a length of 325 feet. What is the departure of the course

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd