Expression for the rate of heat loss to surrounding fluid

Assignment Help Mechanical Engineering
Reference no: EM13708856

A spine attached to a wall maintained at a uniform temperature Tb has the shape of a circular cone with base diameter b, height L and a concave parabolic profile, and it is exposed to a fluid at a uniform temperature T?. (a) Assuming that the thermal conductivity k of the material of the spine and the heat transfer coefficient h are constants, and that the variation of the temperature in the r direction is negligible, develop an expression for the steady-state temperature distribution T(x) in the spine. (b) Obtain an expression for the rate of heat loss to the surrounding fluid.

Reference no: EM13708856

Questions Cloud

What is the work done on or by the steam : A piston-cylinder contains 0.1 kg of superheated steam at 180 ¯ C and 5.0 bars. The piston is frictionless and freely floating. Heat is added until the final volume is twice the initial volume.
Creating a grid and specifying the intial flow velocity : Need to get flow around cylinders in a channel by creating a grid and specifying the intial flow velocity.
Radius of moons orbit relative to the earth : What is the total change in velocity required to go from a 200 km altitude circular, Earth orbit to circular orbit with a radius of 384,000 km (the mean radius of moons orbit relative to the earth, but ignore the moons presence}?
What are the fin efficiency and effectiveness : Aluminium fins of triangular profile are attached to a plane wall whose surface temperature is 250 oC. The fin base thickness is 2 mm, and its length is 6 mm. The system is in ambient air at a temperature of 20 oC, and the surface convection coeffici..
Expression for the rate of heat loss to surrounding fluid : A spine attached to a wall maintained at a uniform temperature Tb has the shape of a circular cone with base diameter b, height L and a concave parabolic profile, and it is exposed to a fluid at a uniform temperature T?.
Quality of the refrigerant and the pressure at final state : A well-insulated piston-cylinder device initially contains 5kg of saturated mixture of refrigerant-134a at -12°C, in which 2.55kg of the refrigerant is in the liquid phase. An electric switch is turned on, and a 110-V source supplies current to a res..
Determine the maximum mass flow rate of the steam : A turbine uses steam at 25MPa and 650°C at the turbine inlet to generate 17.5MW of power. The steam enters the turbine at a rate of 90000kg/h. A portion of the steam passing through the turbine is removed for the purposes of feedwater heating (Figure..
Actual rate of heat extraction from the outside air : A heat pump uses refrigerant-134a to extract heat from the outside air at -10°C to maintain a house at 15°C.The refrigerant enters the condenser at 600kPa and 25°C at a rate of 45L/min and leaves as a saturated liquid at 600 kPa. The compressor consu..
Material of the spine and the heat transfer coefficient : A spine attached to a wall maintained at a uniform temperature Tb has the shape of a circular cone with base diameter b, height L and a concave parabolic profile, and it is exposed to a fluid at a uniform temperature T?.

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  Derive from first principles an expression for the

derive from first principles an expression for the compressive buckling load on a simply supported beam of length l and

  Over a flat portion of the salt lake bed in utah the wind

over a flat portion of the salt lake bed in utah the wind can blow at a relatively steady velocity of 9.6 ms. the flat

  The gas is allowed to expand behind a piston until its

a mass of gas at an initial pressure of 28 bar and with an internal energy of 1500 kj is contained in a well-insulated

  The diameter of one pipe is twice the diameter of the

two pipes are connected together in series. the diameter of one pipe is twice the diameter of the second pipe. with

  Male an isometric drawing

Male an Isometric Drawing of the V stop shown in Figure. Use a suitable scale to depict the view well on an A3 drawing duet.

  Determine the rate at which entropy is produced within the

steam enters a turbine with a pressure of 25 bar and temperature of 500oc. saturated vapor exits at 100oc. at steady

  Derive an equation relating y to the fiber volume fraction

the properties of composites are governed by the properties of the constituent materials the volume contents of the

  A small bucket of water is swinging above a persons head at

a small bucket of water is swinging above a persons head at a constant angular speed of 10rads. the rope is 1 m long

  The potential for air pollution by particulate matter pm25

the potential for air pollution by particulate matter pm2.5 andor pm10 is best assessed by constructing the terminal

  Find the nozzle throat area the mach numbers before and

air flows through a convergent-divergent nozzle from a large reservoir in which the pressure and temperature are

  Calculate the specific enthalpy at the compressor outlet

Calculate the specific enthalpy at the compressor outlet. Include in your calculations the changes in kinetic and potential energy.

  The torque is found to have the same magnitude but in the

a force of f 1.00 7.00n is applied to an object that is pivoted about a fixed axis aligned along the z coordinate

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd