Explain the van der waals constants for methane

Assignment Help Chemistry
Reference no: EM13227880

12.0 moles of gas are in a 3.00L tank at 22.7C. Calculate the difference in pressure between methane and an ideal gas under these conditions. The van der Waals constants for methane are a=2.300L^2*atm/mol^2 and b=0.0430 L/mol.

Reference no: EM13227880

Questions Cloud

Explain how may moles of nitrogen are in an empty : An "empty" container is not really empty if it contains air. How may moles of nitrogen are in an "empty" two-liter cola bottle at atmospheric pressure and room temperature (25 C)? Assume ideal behavior. the partial pressure of nitrogen in air at 1..
Find the treanstion width if the order of the filter : A design for high pass filter with butterworth characteristic is needed. Filter specification rewquire a cut-off frequency of 9 kHz for a sampling rate of 44 kHz, and a stop band attenuation of 40dB
Compute enthalpy for the reaction : Given the following heat capacities, (assume they are constant over the temperature range in consideration here), calcrulate enthalpy for the reaction 2NO + O2 ->2NO2 at 398k.
Determine the noise on the output as percent fs : he sensor to be used has a transfer function of ? Q volts, where Q is in gal/min, and an output impedance of 2.0 k?. Tests show that the output of the sensor has 60 Hz noise of 0.8 V rms. Design a signal-conditioning system, including noise filter..
Explain the van der waals constants for methane : 12.0 moles of gas are in a 3.00L tank at 22.7C. Calculate the difference in pressure between methane and an ideal gas under these conditions. The van der Waals constants for methane are a=2.300L^2*atm/mol^2 and b=0.0430 L/mol.
Compute the ph of the solution after adding the nitric acid : Someone is forced to titrate a solution containing 100 mL of .250M sodium acetate with .125 M nitric acid. Calculate the pH of the solution after adding 50.0 mL of the nitric acid.
Give empirical equations relating saturation temperature : Make a table showing Temperature as a function of pressure for Psat from 20 to 600 psia every 20 psi, and another table showing pressure as a function of temperature from 150 degrees to 350 degrees every 20 degrees.
What does business intelligence really mean to a business : What does business intelligence really mean to a business? What are the negative impacts of business intelligence? How does a database and data warehouse support business intelligence?
Which factors contribute to our personal traits : Discuss personal traits: which factors contribute to our personal traits? take any of MBTI or Big Five Model trait and discuss how it may appear. is there any probability that this class will change your personality somehow? if yes, what may is ch..

Reviews

Write a Review

 

Chemistry Questions & Answers

  State the mercury level in an open-end manometer connected

If the barometeric pressure was 0.98 atm when the mercury level in an open-end manometer connected to a flask of gas was 177 mmHg higher on the side open to the atmosphere than on the flask side

  How many square meters will the oil slick cover

A fishing boat accidentally spills 6.0 barrels of diesel oil into the ocean. Each barrel contains 42 gallons. If the oil film on the ocean is 2.5 × 102 nm thick, how many square meters will the oil slick cover?

  Explain nitrogen gas in a tube then compressed the tube

Nitrogen gas in a tube then compressed the tube around the Nitrogen gas at a fast rate, would the nitrogen gas explode or combust? and will heat result from the combustion?

  State the total mass of the mixture

dissolve CaCl2 in water to make a mixture that is 34.0% calcium chloride by mass. If the total mass of the mixture is 222.3 g, what masses of CaCl2 and water should be used?

  Draw the main organic product from the reaction

Draw the major organic product from the reaction of 2-(carboxymethyl)benzoic acid with acetic

  How many kilograms of chalcopyrite must be mined to obtain

The most common source of copper (rm Cu) is the mineral chalcopyrite (rm CuFeS_2). How many kilograms of chalcopyrite must be mined to obtain 230. g of pure rm Cu?

  Caclculate the number of grams of fe formed

caclculate the number of grams of Fe formed when 0.300kg of Fe2O3 reacts.

  Explain samples temperature probes and allowed to evaporate

2 liquids, A and B, have the same molecular weight. Samples of each are placed on temperature probes and allowed to evaporate. After a period of time Liquid A had a change in temp

  State copper is electroplated from cuso4 solution

copper is electroplated from CuSO4 solution. A constant curent of 4.39 A is applied by an external power supply. How long will it take to deposit 1.00x10^2g of Cu

  Calculate the concentrations of pb2+

A solution is prepared by mixing 50.0 mL of 0.11 M Pb(NO3)2 with 50.0 mL of 1.3 M KCl. Calculate the concentrations of Pb2+ and Cl - at equilibrium. Ksp for PbCl2(s) is 1.6* 10-5.

  Consider a chromatogram containing a single analyte

Consider a chromatogram containing a single analyte with retention time of 4 minutes. The mobile phase elution time is 0.2 minutes. What is the capacity factor (k') for the analyte in question?

  What is the mass of a cube of lead

The mass of a cube of iron is 379 g. Iron has a density of 7.87 g/cm3. What is the mass of a cube of lead that has the same dimensions?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd