Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
1.Using an 9.34 in long wrench, the bolt has now been unscrewed a length of 1.10 in. The force of F={-52.7i +7.00j +6.00k} lb is still applied to the wrench at point B. What is Mx, the moment of force at point O about the x axis?
2.Crane lifts a 700 kg box with an intial upward accel. of 3m/s^2. determine forcein cables AB and CB due to this motion.
3.Explain the difference between materials considered to have “homogeneous” and “isotropic” material properties. Give examples of materials that are considered isotropic but not homogeneous and others that are considered homogeneous and anisotropic.
4.In engineering notation, ten is raised to specific numeric powers. List the specific numeric powers from -12 to +12 to which ten may be raised.
An undistured soil sample has a dry unit wieght of 112 pcf with specific gravity of solids equal to 2.68. a. What is the void ratio of the sample b. What is the porosity of the sample
A manometer of water reads a height of 20cm at a temperature of 15 degrees C. If the diameter of the manometer tube is 1mm, what is the static height reading
A rectangular channel leading from an upstream lake has a bottom width of 20 ft, bottom slope of 0.0002, a Manning roughness factor of 0.016, a discharge of 403 cfs, and normal depth of 6.24 ft.
The car weights 2450 lb, the mechanical efficiency of the drivetrain is 90%, and the wheel radius is 14 inches. The base engine develops 200 ft-lb of torque, and a modified version of the engine develops 240 ft-lb of torque.
the porosity of the soil is 0.52 with an organic carbon content of 0.1%. the depth to groundwater is 12m. provide a qualitative evaluation for the fate of PCE at the site as a basis for a phase I site assesment.
The outside and inside diameters of 75 mm and 63 mm, respectively. A strain gauge is placed on the outside of the hollow segment of the tube to measure normal strains in the longitudinal direction. assume E=73 GPa and Poissons ration v=0.33. strai..
Assume the rate constant for BOD decay is 0.2 d^-1, the mean velocity of the stream is 0.5 m s^-1, and the initial concentration is 100 mg L^-1 at x=0. Plot the resulting concentration with downstream distance x in km.
Springs AB and CD have a stiffness of k = 300 N/m and k' = 200 N/m, respectively, and both springs have an unstretched length of 600 mm. If the 2-kg smooth collar starts from rest when the springs are unstretched
A moist soil sample weighing 22.2 N has a moisture content of 20%. How man N of water must be added to the sample to increase the moisture content to 30%
Ammonia vapor flows through a valve. It enters the valve at a pressure of 8 bar and a temperature of 120C and after going through a throttling process it exits at a pressure of 3.5 bar.
The suppliers says it would prefer to sell the company a 65% NaOH solution and the company says the water content is immaterial as long as the equivalent costs are the same including freight.
a soil sample is obtained by pushing a 16 in long tube into the side of a pit. the tube has an inside diameter of 3 in. and weighs 1.8 lb. The soil in the tube is trimmed so that its ends are flush with the ends of the tube.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd