Explain how to estimate the long-term safety factors

Assignment Help Civil Engineering
Reference no: EM13315969

A 2.0m-wide strip at a depth of 1 m in a stiff clay carries a wall load of 425 kN/m. The saturated unit weight of the caly is 20kN/m^3. TRiaixal tests give the following results: c'=10 kPa, phi'=28 degree, cu=105kPa, and phi_u = 0. EStimate the long-term safety factors.

Reference no: EM13315969

Questions Cloud

How much did the sound level change : You are standing 5 m from a tractor when the operator starts it ip the intensity is 3 x10^-5 W/m^2. How much did the sound level change
What assumptions can you make regarding the system : The flow is assumed to be laminar and the film thickness, H, constant. Using a coordinate system located on the plate at the surface of the pool, complete the following: a. Dram and sketch the system. Include coordinate system in your sketch.
Determine the resistance of the resistor : A capacitor that is initially uncharged is connected in series with a resistor and an emf source with E=110V, What is the resistance of the resistor
Graph the bond yield to maturity : Graph the bond yield to maturity (YTM) on the y-axis of an XY-scatter plot, with the bond to maturity in years on the x-axis and use a polynomial regression of order three to determine the relation between the YTM and the bond maturity.
Explain how to estimate the long-term safety factors : A 2.0m-wide strip at a depth of 1 m in a stiff clay carries a wall load of 425 kN/m. The saturated unit weight of the caly is 20kN/m^3. TRiaixal tests give the following results: c'=10 kPa, phi'=28 degree, cu=105kPa, and phi_u = 0.
How the project teams and coaches master agile methodology : Analyze how the project teams and coaches master the agile methodology to solve business problems. Highlight the one that you believe is the most effective and support your answer.
Determine the temperature of the liquid : The length of the mercury column at the ice point and steam point are 5.0 cm and 40.0cm respectively. What is the temperature of the liquid
Explain the different elements of property rights : Property rights are protected in the current laws of states usually found in the form of a constitution or a bill of rights. The United States Constitution provides explicitly for the protection of private property in the Fifth Amendment and Fourteen..
What would be max eccentricity such that entire soil beneath : The moment of inertia of the footing about its diameter is piB^4/64. What would be the maximum eccentricity such that the entire soil beneath the footing is in compression FOr this value of eccentricity, draw the pressure distribution around the p..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Design the traffic pole against torsion knowing that angle

The maximum wind pressure on the traffic sign is 200 kg/m2. The maximum allowable shear stress is 350 kg/cm2. Design the traffic pole (only vertical element) against torsion knowing that angle of twist at the base should not exceed 6°.

  Calculate low point of curve if the intersection at station

A vertical parabolic curve is to be used as a sag curve, and it is desired to know the location and elevation of the low point. The curve is 750ft long , and the minus grade of 3.6 percent intersects the plus grade of 6.2 percent at station 240+80..

  Calculate the distance upstream from the point of entry

A clean-earth channel, for which n=0.020, is 6m wide and lies on a slope of 0.005236. Water flows at 30m3/s through the channel and enters a reservoir. The water depth in the channel, just before the entry to reservoir, is 3m.

  Determine internal shear and moment at specified location

Write a computer program that can be used to determine the internal shear and moment at any specified location x along the beam, and plot the shear and moment diagrams for the beam.

  Compute atomic packing factor for diamond cubic crystal

Assume that bonding atoms touch one another, that the angle between adjacent bonds is 109.5, and that each atom internal to the unit cell is positioned a/4 of the distance away from the two nearest cell faces.

  What policies were implemented during

what policies were implemented during and after WW1,WW2,Cold war?

  What are the x- and y-coordinates of the resulting center

The section of the plywood in the 3rd quadrant is sawed off and the resulting piece is then glued squarely over the 4th quadrant portion of the plywood with glue of negligible weight.What are the x- and y-coordinates of the resulting center of gra..

  Find the force ratio equation

How do you find the force ratio equation to determine the maximum total load that can be applied to a truss?

  Determine the power required as a function of time

A train of total mass equal to 500 Megagrams starts from rest and accelerates uniformly to a speed of 90 km/h in 50 s. After reaching this speed, the train travels with a constant velocity.

  How many rapid sand filters are needed for the plant

A water treatment plant is being designed for a flow of 1.6 m^3/s. How many rapid sand filters, using only sand as the medium, are needed for this plant if cross-sectional area of each filter is 10 m x 20 m

  Determine the force in member ac-fh and fg

determine the force in member AC, FH, and FG and indicate if the member is in tension or compression. List all zero force members.

  Determine the percent finer than each sieve

Determine D10, D30, and D60Effective grain size c. Cu d. Cz Sieve Number Opening (mm) Mass of soil retained (g) No. 4 4.750 28 No. 10 2.000 42 No. 20 0.850 48 No. 40 0.425 128 No. 60 0.250 221 No. 100 0.150 86 No. 200 0.075 40 Pan 24

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd