Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Properties of frozen tissues have been measured as part of understanding the response of tissue to cryopreservation. In one set of experiments, frozen bovine carotid arteries were tested in uniaxial tension. The cross-sectional geometry was extracted from digital images of slices of the artery obtained after testing. For the specimen tested, the gage length is 30 mm , the outer diameter is 6 mm , and the wall thickness is 1 mm .
From the load deflection curve, estimate the elastic modulus of the frozen artery.
A +2 percent grade on an arterial highway intersects with a -1 percent grade at station (535 + 24.24) at an elevation of 300 ft. if the design speed of the highway is 65 mi/h,
write a computer program that generates a sequence of binomial random variables with parameters n=20 and p=0.3. a) use the inverse c.d.f approach
A distance of 200 ft must be taped in a manner to ensure a standard deviation smaller than ± 0.03 ft. What must be the standard deviation per 100 ft tape length to achieve the desired precision?
The preliminary design for a wastewater treatment plant is being developed. The wastewater flow rate is 10,000 m3/day, and the BOD5 concentration is 200 mg/L. The plant discharge standard is 30 mg/L as BOD5.
For the following waste and river characteristics just upstream from the outfall, find the minimum downstream DO that could be expected
There are two ways to get from City One to City Three, (a) directly or (b) via City Two. Let A be the event that the road from City One to Three is open. Similarly, B is for City One to Two and C is for City Two to Three.
A line AC was observed in 2 sections AB and BC, with lengthsand standard deviations listed below. What is the total lenth AC and its standard deviation?
A horizontal curve is being designed for a new two-lane highway(12-ft lanes). The PI is at station 250 + 50, the design speed is 65 mi/h, and a maximum superelevation of 0.07 ft/ft is to be used.
A rectangular channel is 25ft wide and has a flow of 500 cfs at a velocity of 5ft/s. (a) Determine the specifc energy of water in the channel. (b) What is the criticl depth of water in the channel (c) What is the critical velocity
Determine the carburizing time necessary to achieve a carbon concentration of 0.35 wt% at a position 2 mm into an iron–carbon alloy that initially contains 0.10 wt% C
Determine the required dimensions. The inside diameter is to be two- thirds of the outside diameter. The allowable shearing stress is 70 MPa, and the angle of twist is not to exceed 4 degree in 3 m of the shaft.
Calculate the rate of entropy change for each component of a refrigerator that uses 10 kW power, rejects 14 kW heat and has a high temperature reservoir at 400 K
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd