Determining the recovery of ethylbenzene

Assignment Help Chemical Engineering
Reference no: EM13883988

Optimize the design of a distillation column to separate 225 metric tons per hour of an equimolar mixture of benzene, toluene, ethylbenzene, paraxylene, and orthoxylene with minimum total annualized cost. The feed is a saturated liquid at 330 kPa. The recovery of toluene in the distillate should be greater than 99%, and the recovery of ethylbenzene in the bottoms should be greater than 99%.

Reference no: EM13883988

Questions Cloud

What is the mean of the entire population : What is the mean of the entire population and What is the mean of the means?
Dynamic systems : NOTE: If you don't have access to MATLAB, please download Scilab, a free open-source software with similar functionality. Several functions in both software are identical (such as ss2tf) whereas others have slightly modified forms (lsim in MATLAB bec..
Is there a difference between ethical obligations : Is there a difference between ethical obligations and legal obligations in regards to online privacy?
Lossy audio compression is based on the phenomenon : Audio CD format requires sound to be digitized using a sampling rate of 44.1 kHz and bit-depth of 16 bits, in stereo mode. If 74 minutes of the digitized audio can be stored in a single CD, What is the CD storage capacity?
Determining the recovery of ethylbenzene : The feed is a saturated liquid at 330 kPa. The recovery of toluene in the distillate should be greater than 99%, and the recovery of ethylbenzene in the bottoms should be greater than 99%.
In what ways are xbrl financial statements advantageous : In what ways are XBRL financial statements advantageous when compared to traditional paper financial statements?
What types of controls should be used to properly : What types of controls should be used to properly limit access in intranets and extranets?
Inert gas for blanketing and purging vessels : A supply of nitrogen is required as an inert gas for blanketing and purging vessels. After generation, the nitrogen is compressed and stored in a bank of cylinders, at a pressure of 5 barg.
What are the three levels of network platforms : What are the three levels of network platforms that are utilized in e-business and which groups use each level?

Reviews

Write a Review

 

Chemical Engineering Questions & Answers

  Calculating reaction at support we say centorid of triangle

In Uniformly varying load in simply supported beam, when we are calculating reaction at support we say centorid of triangle will be at 2x/3 from a to b. but, when calculating moment we say centroid will lies at x/3 from a to b, why?

  Calculate the diffusion flux

Calculate the diffusion flux at 1027(C (1300 K) for the same concentration gradient and assuming an activation energy for diffusion of 125,000 J/mol.

  Research in visbreaking with potential areas

Latest commercial technologies, R&D in visbreaking with potential areas still need for improvement

  Estimate the heat transfer rate across the slab

The opposite surface of a slab A and B are maintained at 100 degree and 70 degree respectively ,if the steel plate measures 10cm thick estimate the heat transfer rate across the slab and the temperature recorded by a ther mocouple embedded 3cm fro..

  What is the most likely reason dot regulates the domestic

the dot regulation at 49 cfr 174.450 previously stipulated that when fire occurs in a domestic rail shipment of

  Introduction to petroleum engineering

Present/display a research paper with the topic Introduction to Petroleum Engineering,giving preferences to the changes that are generated through the discipline in our world today.

  Microstructural products of eutectoid iron-carbon

Name the microstructural products of eutectoid iron-carbon alloy (0.76 wt% C) specimens that are first completely transformed to austenite, then cooled to room temperature at the following rates:

  Calculate the current flowing in the conductor

Problem: A 500mm conductor inside an electric motor has a force of 1.5 newtons exerted on it. If it is at right angles to a magnetic field of flux density 0.6 T, calculate the current flowing in the conductor.

  Develop a process schematic

Develop a process schematic. Assume that this process is continuous. Show each product stream illustrating the impurity level with respect to the feed entering the particular separator.

  Applied fluid power-lab write-up format

1. Lab title and number 2. Purpose· Your interpretation of the purpose of the lab. 3. Theory - A brief discussion of the engineering or scientific theory that the lab exercise is based on.

  Beverage technology 11 a distillation column fig 1

a distillation column fig. 1 separates 4500 kghr of a 40 benzene 60 chlorobenzene liquid mixture at 20oc. the liquid

  Bed of solids on the belt fluidize

The solid particles have average diameter 3 mm and piece density 730 kg/m3. Hot air at 150 ºC is blown up through the dryer belt at a volumetric flow rate of 7200 m3 /hr per m2 of belt area. Will the bed of solids on the belt fluidize?

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd