Determine what is the elevation of the curve at station

Assignment Help Civil Engineering
Reference no: EM13309362

An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft. What is the elevation of the curve at station 234+00?

Reference no: EM13309362

Questions Cloud

What is the highest possibledesign speed for the curve : The road has 12-ft lanes. Due toexpensive excavation, it is determined that a maximumof 34 ft can be cleared from the road's centerline toward the inside lane to provide for stopping sight distance.
Describe the changes in price and quantity : Describe the changes in price and quantity moving from one equilibrium to another. Be sure to identify what increases, what decreases, or what may do either.
Define reaction and explicitly state how the reaction define : The reaction 4PH3(g) -> P4(g) + 6H2(g) is found to be first order in PH3 with a rate constant of 1.6*10^-2 sec^-1 at 650 C. a)Give the rate law (rate equation) for the reaction and explicitly state how the reaction rate in this case would be defin..
Determine the elevation and stationing of the low point : A 1400-ft-long sag vertical curve (equal tangent)has a PVC at station 115 + 00 and elevation 750 ft. The initial grade is -3.5% and the final grade is +6.5%. Determine the elevation and stationing of the low point, PVI, and PVT
Determine what is the elevation of the curve at station : An equal-tangent crest curve connects a +2% initial grade with a -1% final grade, and is designed for 55mi/h. The station of the PVI is 233 + 40 with elevation 1203 ft. What is the elevation of the curve at station 234+00
State solutions act as buffers by placing a check in the box : Identify which of the following solutions may act as buffers by placing a check in the box next to the mixture. A. HNO3 , NaNO3 D. H2SO4, NaHSO4
Find where should the object be placed : An object with a height of 5cm is placed in front of a concave mirror that has a focal length of 12cm. where should the object be placed
Hopw to calculate the mass percentage of c and h : A 0.0989 g sample of an alcohol is burn in oxygen to yield 0.2160 g Co2 and 0.1194 g H2o. Calculate the mass percentage of C, H, and O in the compound
What is conservative force according to the text book : Explain the physics fundamental process that causes the scope ,rod, pith ball, etc to discharge when you touch it. what is conservative force according to the text book of Giancoli

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Determine both the point of tangent and deflection angles

The point of intersection of the tangents is located at station (948+67.32). If the design speed of the highway is 60mi/h, determine both the point of tangent and the deflection angles to whole stations for laying out the curve. Select appropriate..

  Determine what would be maximum load that covers right range

The testing machin that covers the right range of load is to be chosen. it is expected to load the material up to a strains of 3%. if th material must remain elastic over that range, what would be the maximum load

  How long the train blocked the crossing

Assuming constant acceleration, determine how long the train blocked the crossing. Dis- regard the width of the crossing.

  Determine the depth of water in the pond

water is pumped into an irrigation pond at 250 gal/min for 24 hours. the pond area is 2500 square feet. Determine the depth of water in the pond .Provide answer in ft and m

  What is probability that the wave height will exceed 6 meter

A nuclear facility in a coastal region is built to withstand ocean wave forces. Suppose the annual maximum wave height of the ocean waves (above the sea level) is a lognormal random variable with mean height of 4.0 meters and a c.o.v. of 0.8

  Ultimate bod of municipal wastewater-reaction rate constant

If bod5 and ultimate bod of a municipal wastewater are 200mg/l and 457 mg/l respectively what is the reaction rate constant? a) .265 b) .050 c) .115 d) .165

  Is the flow laminar or turbulent and find reynolds number

For Oil (SG=0.86, u=0.025 Ns/m^2) flow of 0.3m^3/s through a round pipe with diameter of 500 mm, determine the Reynolds number. Is the flow laminar or turbulent

  Determine the acceleration of each plate with a force

The coefficients of static and kinetic friction are 0.3 and 0.2, respectively, between each of the plates and between plate A and the ground. Determine the acceleration of each plate.

  What is magnitude of hydrostatic force on triangular gate

A vertical gate keeps water from flowing in a triangular irrigation channel. The channel has a 4-m top width and a 3-m depth. If the channel is full, what is the magnitude of the hydrostatic force on the triangular gate and its location

  Plot ground level concentration of sulfur dioxide as functn

Plot the ground level concentration of sulfur dioxide as a function of distance from the stack and determine the maximum ground level concentration at both with and without air pollution control and the distance from the stack where the maximum co..

  Determine the required value for m

A 1 meter diameter cylindrical mass, M, is connected to a 2 meter wide rectangular gate. The gate is to open when the water level, h, drops below 2.5 meters. Determine the required value for M. Neglect friction at the gate hinge and pulley.

  Compute dead load due to backfill that the pipe must support

A 300 mm diameter pipe is placed in a 3 m deep rectangular trench that is 0.60 m wide. The trench is backfilled with clay that has a bulk unit weight of 18.8 kN/m3. Compute the dead load due to backfill that the pipe must support.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd