Determine what is the adiabatic efficiency of the turbine

Assignment Help Civil Engineering
Reference no: EM13306358

Work is produced by a steady running adiabatic steam turbine. At the inlet the steam is at 1 MPa and 320 C, and leaves the turbine at 20 kPa. The work output of the turbine is measured to be 600 kJ/kg (of steam passing through the turbine). What is the adiabatic efficiency of the turbine?

Reference no: EM13306358

Questions Cloud

Create the needed constructors : In this assignment you will be implementing three classes -Date (you would reuse the Date class after implementing toString() and equals() method), Employee and EmployeeTest with main method to test Employee class.
Determine the relative humidity using psychrometric chart : The wet bulb and dry bulb temperatures for humid atmospheric air (at 100 kPa) are measured to be 20 C and 25C respectively. Determine: a. using the psychrometric chart, the relative humidity  b. using the psychrometric chart, the humidity ratio
Prioritise the stakeholders on a project : Question 1.Why is it important to prioritise the stakeholders on a project?
Find the constraint force : A mass m slides in the bottom of a hemispherical bowl of radius R under the influence of gravity. Find the constraint force
Determine what is the adiabatic efficiency of the turbine : At the inlet the steam is at 1 MPa and 320 C, and leaves the turbine at 20 kPa. The work output of the turbine is measured to be 600 kJ/kg (of steam passing through the turbine).
What is the minimum nonzero thickness of the film : A piece of glass has a thin film of gasoline floating on it. A beam of light is shining perpendicular on the film. what is the minimum nonzero thickness of the film
Why timer can be source of repetition instead of looping : In java such as an event driven programming such as building a simple screen saver explain why the timer can be the source of repetition instead of looping and why is it better?
Determine humidity ratio-dew point and mass of dry air : An air-water vapor mixture at 0.1 MPa, 35 C and 70% relative humidity occupies a volume of 100 m^3 Determine the humidity ratio, the dew point, the mass of dry air in the volume and the mass of water vapor in the volume.
Write a method that has the radius of the circle passed : Write a method that has the radius of the circle passed into it. It computes the area, and returns the area to the main method.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Determine the friction and the head loss with linear length

A 8 inch polyethylene pipe has a flow rate of 1000 gallons/minute with a linear length of 10000ft. Starting at elevation 200ft then ends at 600ft elevation. Initial pressure is 40 psi. find the friction and the head loss.

  Radius of the steel wire ehen stretching with other wire

The aluminium wire has a radius of 1.1mm. What must be the radius of the steel wire if it is to stretch the same distance as the aluminium wire, so that the two wires maintain equal lengths after the masses are attached?

  Determine how many bits wide is the main memory data bus

A MIPS-based computer system with 2 GB of main memory that is built on a single circuit board. It is designed with a single control signal between the CPU chip and main memory, i.e. one bit of control that is set to one for Read operations

  What is the population equivalent of the wastewater flow

A person produces about 0.17 pounds of BOD per day in fecal waste. What is the population equivalent of the wastewater flow Based on this calculated population, what would the average daily wastewater production be per person

  Determine the maximum safe load for the column

A finished 2 x 4 timber (actual size 1 5/8 in. x 3 1/2 in. x 10 ft long) is used as a fixed-end, fixed-end column. If the modulus of elasticity for the timber is 1600 ksi and a factor of safety of 3 with respect to failure by buckling is specified

  Describe a soil classified as sw and a soil classified as ch

Describe a soil classified as SW and a soil classified as CH in the Unified Soil Classification System as you would to a person having no knowledge of soil classification procedures or equipment.

  How many gallons of water per cubic yard should be added

given moisture contents of 5%, 9%, 14%, 22% and 25% with corresponding weights of 3.1, 3.42, 3.78,3.85, 3.77 lbs. of the compacted soil. (specific gravity =2.7)(compaction test using compaction mold of 1/30 ft^3).

  Calculate the force of water hitting a concrete cylindrical

How do you calculate the force of water hitting a concrete cylindrical pole. The velocity of the water is 2 ft/s, the depth of the water is 10 ft, and diameter of the pole is 3 ft. So what would be the total force exerted on the pole by the water?

  Determine the void content

If the dry-rodded unit weight of an aggregate is 105 lb/ft3 (1680 kg/m3) and its specific gravity is 2.65, determine the void content.

  Total energy per unit weight of fluid

A fluid flowing in a pipe 30cm in diameter has a uniform velocity of 4m/s. The pressure at the center of the pipe is 40KPa, and the elevation of the pipe's centerline above an assumed datum is 4.5m. Compute the total energy per unit weight of the ..

  What is the original estimated duration of the project

The initial schedule called for 500 feet of pipeline to be installed each week, with the total construction cost projected to be $25 million. After 8 weeks, 4750' of pipeline has been installed at a cost of $11.25 million.

  Find the weight per lineal foot for a normal weight of beam

the unit weight of normal weight reinforced concrete is commonly assumed to be 150 lb/ft cubed. find the weight per lineal foot (lb/ft) for a normal weight reinforced concrete beam that: a. has a rectangular cross section 16 in.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd