Determine the volume of each cfstr

Assignment Help Civil Engineering
Reference no: EM13545583

Disinfection by ozone follows first-order kinetics, with a rate constant of 1.2/minute. The town of Obfisquitory wishes to use 4 equal volumes of CFSTR's in series to disinfect 2 million gallons per day (mgd) of water containing 1000 coliforms/L to the maximum required concentration (MCL) of 1 coliform/L.

a) Determine the volume of each CFSTR

b) If a two CFSTR, with a volume equal to the sum of the four in series, is used for disinfection, what will the final coliform concentration be?

Reference no: EM13545583

Questions Cloud

To orient a transit in azimuth when the transit is set up : To orient a transit in azimuth when the transit is set up over a point D, a backsight is taken to another point, C, with vernier A set at the azimuth of the line CD and with the telescope in its inverted position
Find index r and recurrence relation compute : You will be using a large crane... lets say one with a capacity of 30T. What considerations need to be made prior to picking up a 15T load with the crane? If you are familiar with the use of a crane be sure to include the discussion of the outriggers..
Determine its changes in kinetic and potential energy : An automobile having a mass of 900 kg initially moves along a level highway at 100 km/hr relative to the highway. It then climbs a hill whose crest is 50m above the level highway and parks at a rest area located there
What is the difference among cement plaster : If the tangents intersect at an angle of 40 degrees, what is the highest degree of curve that can be used?..how to solve this problem using chord basis formula?
Determine the volume of each cfstr : Disinfection by ozone follows first-order kinetics, with a rate constant of 1.2/minute. The town of Obfisquitory wishes to use 4 equal volumes of CFSTR's in series to disinfect 2 million gallons per day (mgd) of water containing 1000 coliforms/L to t..
What is the maximum length of trench that can excavated by : What is the maximum length of trench that can excavated by hand economically rather than by a trenching machine. it cost 900.00 to transport a trenching machine to the job and back to the storage yard. the trenching machine can excavate 265 linear fe..
Determine the design compressive strength for a pinned ended : Determine the design compressive strength for a pinned ended HSS 8x8x3/8 column of ASTM A500, grade B steel with an unbraced length of 35ft?
Should schmidt hammer test be adopted as an alternative test : If concrete compression test fails, should Schmidt hammer test be adopted as an alternative test to prove the concrete strength?
Shall engineers accept the proposal : Is it desirable to use concrete of very high strength i.e. exceeding 60MPa? What are the potential problems associated with such high strength concrete?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find the conjugate depths of the jump formed in a channel

The discharge through a 6.0 ft wide rectangular channel is 200.0 ft3/s. Find the conjugate depths of the jump formed in such a channel if 3.5 ft of energy head is lost through it.

  Determine the initial and final temperatures

A mass of 5 kg of saturated liquid-vapor mixture of water is contained in a piston-cylinder device at 125 kPa. Initially, 2 kg of the water is in the liquid phase and the rest is in the vapor phase.

  Design a rectangular channel contraction from width b1

Design a rectangular channel contraction from width b1 (upstream) to width b2 (downstream). Assume uniform flow approaches the contraction (i.e. normal depth approaching the channel contraction).

  Find hp per foot of cutting edge ratio for all 4-conditions

The Caterpillar D6R Series 3 and D8R tractors are rated, respectively, at flywheel horsepowers (fwhp) 0f 185 and 305. The "A," "S," and "SU" blade widths (length) for the D6R are S, 16 ft, 9 in.; A, 17 ft, 1 in

  Determine a soil with a hydraulic conductivity and depth

Is a soil with a hydraulic conductivity of 1*10-5 cm/s and depth of 10 ft equivalent to a soil with hydraulic conductivity of 1*10-6 cm/s and depth of 5 ft

  Explain what is the difference between axial and hoop stress

what is the difference between normal stress and allowable shear stress. What is the difference between axial and hoop stress and how do you calculate tensile force per mm.

  Stiglers private interest theory proposes that regulatory

stiglers private interest theory proposes that regulatory bodies are made up of individuals who are self-interested and

  What is the potential theoretical oxygen demand associated

A Waste water has been characterized for nitrogen-containing compounds and the TN was 26 mg N/L, the TKN was 14 mg N/L and nitrate was 27.3 mg NO3-/L. What is the potential theoretical oxygen demand (mg O2/L) associated

  Determine what is kinetic energy of the object at the time

A 6.22-kg object passes through the origin at time t = 0 such that its x component of velocity is 5.45 m/s and its y component of velocity is -2.88 m/s. (a) What is the kinetic energy of the object at this time

  Determine the smallest allowable value of p of the tape

Knowing that the coefficents of friction between the tape and the drums are us=.40 and uk=0.30 and that drum C is free to rotate, determine the smallest allowable value of P if slipping of the tape on drum B is not to occur.

  Find the horsepower added for the flow through the system

Find the horsepower added if the flow through the system is 400 m^3/s. The entrace is sharp, the two bends are equivalent to smooth 90 degree bends with R=1 ft, and there are two fully open gate valves

  Describe the difference between the two locations at time t

The peak-hour volumes at two locations were counted and found to be equal. However, the PHFs were .85 at the first location and .60 at the second. Describe the difference between the two locations if t=5 min.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd