User Account

All Pages

Determine the uniform flow depth in a trapezoidal channel

Assignment Help Civil Engineering
Reference no: EM13316671

Determine the uniform flow depth in a trapezoidal channel with a bottom width of 8 ft and side slopes of 1 vertical to 2 horizontal. The discharge is 100 ft3/s. Manning roughness factor is 0.015 and the channel bottom slope is 0.004.

Reference no: EM13316671

Questions Cloud

Different markets or types of organizational buyers : what are the three different markets or types of organizational buyers? How are they different?
Determine what is the dischage capacity of the pipe : a 96-in diameter cast iron pipe carries water at 60f. the head loss due friction is 1.5ft per 1000ft of pipe. what is the dischage capacity of the pipe
How much power does it produce : A reversible engine takes in 555 joules per second and exhausts 482 watts. how much power does it produce
Find the optimum number if technicians needed : A computer technician can handle on average 5 service calls per day. The cost of adding a technician (C1) is $200 per day and the estimated cost of waiting per incident (C2) is $250 per day.
Determine the uniform flow depth in a trapezoidal channel : Determine the uniform flow depth in a trapezoidal channel with a bottom width of 8 ft and side slopes of 1 vertical to 2 horizontal. The discharge is 100 ft3/s. Manning roughness factor is 0.015 and the channel bottom slope is 0.004.
Rate of inflation-real income increase : If your nominal income rose by 5.3 percent and the price level rose by 3.8 percent in some year, by what percentage would your real income (approximately) increase? If your nominal income rose by 2.8 percent and your real income rose by 1.1 percent i..
What is the focal length of a meniscus lens : What is the focal length of a meniscus lens that has a convex surface of radius 32 cm and a concave surface of radius -16 cm
Find the force exerted by pillar : An 82.0 kg-diver stands at the edge of a light 5.00-m diving board, which is supported by two pillars 1.60 m apart, Find the force exerted by pillar A
Natural rate of unemployment in a particular year : Suppose that the natural rate of unemployment in a particular year is 5 percent and the actual rate of unemployment is 9 percent. Use Okun's law to determine the size of the GDP gap in percentage-point terms. If the potential GDP is $500 billion in t..

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute gravimetric water content and buoyant unit weight

A sample of clay was obtained from a point below the water table. An oven-drying test performed on this sample resulted in the following data: Mass of can= 10.88 g Mass of can + wet soil = 116.02 g

  Determine the ratio k of the tension in the remaining wire

The small sphere of mass (m) is suspended initially at rest by the two wires. If one wire is suddenly cut, determine the ratio (k) of the tension in the remaining wire immediately after the other wire is cut to the initial equilibrium tension.

  Elevation of the road at station

Given the following data for a vertical curve of a road; G1=-2.5%, G2=+5.5% and station of PVI=250+50.At station 252+50, the vertical curve must intersect an existing road at elevation 48.48ft. the elevation on the tangent section at station 256+5..

  Calculate pressure and piezometric head at free surface

Calculate the pressure, and the piezometric head at the free surface, at both interfaces, and at the tank bottom. Take the elevation datum at the bottom of the tank.

  Design riveted end plated connection between beam and flange

Design a riveted end plated Connection between a beam ISHB-300 and the flange of the Column ISHB-200 to transfer a vertical factored shear of 125 kN and a factored hogging bending moment of 125kNm.Use Shop rivets of 20mm dia.

  Writing case study about bridge collapse

Writing case study about bridge collapse

  Determine the position-the velocity and the acceleration

the motion of a particle is defined by the relation x= 1.5t^4-30x^2+5t+10. where x and t are expressed in meters and seconds, respectively. Determine the position, the velocity and the acceleration of the particle when t=4s

  Determine appropriate dimensions of the finished water

Determine appropriate dimensions of the finished water clearwells to achieve adequate disinfection using chlorine. Flow Rate Q = 30 million gallons paer day.

  Determine the rise in water level within the drainage layer

A rectangular landfill in the New England area is 175 m in width, and sloped at the uniform angle of 75 degrees. Its cover system includes a drainage layer constructed of clean, medium sand (Ks = 10^-2 cm/s).

  Solve for steady-state concentration of both compounds

Atrazine, a neutral triazine herbicide manufactured by the Ciba-Geigy group, undergoes biological and chemical decomposition to formhydroxy-atrazine. a).Assuming a pseudo first order decay constant of 0.01/day for atrazinr and 0.005/dayfor hydroxy..

  Calculate the stopping sight distance over the crest

Calculate the stopping sight distance over the crest of a 1,500 ft vertical curve with a plus grade of 4.4percent and a minus grade of 2.3 percent.

  Determine undrained shear strength on compacted soil sample

An unconfined compression test was conducted on a compacted soil sample, 50 mm diameter by 100 mm long. The peak axial force recorded was 230 N and the sample shortened by 2 mm.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd