Determine the transmissivity through a confined aquifer

Assignment Help Civil Engineering
Reference no: EM13313835

A 12-in well is drilled through a confined aquifer of average thickness 80 ft. Two observation wells located 50 and 120 ft away register a difference in drawdown of 10 ft. The steady-state pumping rate is 1000 gpm. Determine the transmissivity.

Reference no: EM13313835

Questions Cloud

What sample size would be necessary to detect a true mean : Benzene is a toxic chemical used in the manufacturing of mechanical chemicals. A manufacturer claims that its exit (effluent) water meets the federal regulation standards with a mean of less than 7980 ppm of benzene.
More recent success in climbing in to the top 10 : Research the Internet for more information about the #6 Fortune 500 Company: Apple, and prepare a 2 page summary statement of their more recent success in climbing in to the top 10 of the Fortune 500. Must be in strict APA 6th format, including refer..
How long will take the concnetration of pollutant in lake : A lake has a steady-state pollution concentration of 50 mg/L and is being fed by a stream with flow rate 50m3/day. The volume of the lake is 1.00 x 10^7 m3, and the decay rate for the pollutant is 0.15/day.
How long does it take the wheel to come to rest : A bicycle wheel is spinning with an angular velocity of 20 rad/s. How long does it take the wheel to come to rest
Determine the transmissivity through a confined aquifer : A 12-in well is drilled through a confined aquifer of average thickness 80 ft. Two observation wells located 50 and 120 ft away register a difference in drawdown of 10 ft. The steady-state pumping rate is 1000 gpm
At what rate should the well be pumped for the water level : A well of 0.4 m diameter fully penetrates a 25 m thick confined aquifer of coefficient of permeability of 12m/day. The well is located in the center of a circular island of radius 1 km.
Determine what is the degree of curve by chord definition : For a circular curve with a radius R of 400 meter, what is the degree of curve by (a) arc definition and (b) chord definition
Define when a piece of metal is irradiated with uv radiation : When a piece of metal is irradiated with UV radiation (wavelength = 162 nm), electrons are ejected with a kinetic energy of 5.96*10^-19 J. What is the work function of the metal? (in joules)
How might a project manager assess the risk of things going : How might a project manager assess the risk of things going wrong and take that into consideration of the time needed to complete a project?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Minimizing the tension tab

What should TAC , TAB and the acute angle ? between TAB and the vertical to minimize the tension TAB ? Take o and W = 1,000 N. Hint: Consider various possible force triangles and decide on inspection how to minimize TAB.

  Determine the maximum negative moment in each span

determine the maximum negative moment in each span and maximum negative moment at each support. remember that live loads shall be placed so as to cause the greatest effect. specify the method that you used to determine the moments.

  Tape corrections under following conditions

The tape is stretched over three equal spans. Calculate the tape corrections under the following conditions at field, temperature = 85ºF, pull = 18kg, E= 2.109 x 10 6 kg/cm 2

  Determine the magnitude r of the downward force

The guy wires AB and AC are attached to the top of the transmission tower. The tension in cable AB is 8.6 kN. Determine the required tension T in cable AC such that the net effect of the two cables is a downward force at point A.

  Determine force exerted by the hydraulic cylinder on boom

A hoist mechanism is attached to the back of a pickup truck. The crate being moved by the hoist shown below weighs 200 lbs. Note: Point A is directly above point B and the vertical distance between points A and B is 16 inches.

  How long will it take alexis to pay off the loan

how long (how many monthly payments) will it take Alexis to pay off the loan and accrued interest completely (to a zero balance). Use linear interpolation as necessary to get as close an answer as possible.

  Write the vector expression for velocity of a as measured

The air transport B is flying with a constant speed of 480 mi/hr in a horizontal arc of 9-mi radius. When B reaches the position, aircraft A, flying south-west at a constant speed of 360 mi/hr

  Determine is the flow rate typical for a bathroom faucet

Water in a household plumbing system originates at the neighborhood water main where the pressure is 480kPa, the velocity is 5m/s, and the elevation is 2.44 m. A 19 mm (3/4-in) copper service line supplies water to a two-story residence

  Determine what is the max length of the slotted region

a rectangular bar of length l has a slot in the middle half of its length. the bar has width b, thickness t, and modulus of elasticity E. the slot has a width b/4. the stress in the middle region is 24000 psi, the length is 30 in, andthe modulus o..

  Find out the number of turns in each spring

Find out the number of turns in each spring, if the diameter of the spring wire 14 mm and the diameter of coil is 80 mm. Assume C=84 GN/mmxmm.

  Calculate for the ground distance of the angular coverage 60

If an aerial photograph is taken with this camera tilted angle­­A=35° at an altitude 5000ft., calculate for the ground distance of the angular coverage 60°.

  Calculate the pressure at the bottom of the test tube

An open test tube at 293 K is filled at the bottom with 12.1 cm of Hg and 5.6 cm of water is placed above the mercury. Calculate the pressure at the bottom of the test tube if the atmospheric pressure is 756 mm Hg.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd