### Determine the total flow exergy rates at the valve inlet

Assignment Help Mechanical Engineering
##### Reference no: EM13708975

Water vapor enters a valve with a mass flow rate of 1 kg/s at a temperature of 260 degrees C and a pressure of 3.5 MPa, and undergoes a throttling process to 2.75 MPa (T0=25, P0=100kPa).

1) Determine the total flow EXERGY rates at the valve inlet and exit, and the rate of EXERGY destruction (all in kW).

2) Evaluating EXERGY at \$0.08/kWhr, determine the annual cost associated with the EXERGY destruction, assuming 8000 hours of annual operation.

### Previous Q& A

#### Octave is defined as a doubling of the frequency

An octave is defined as a doubling of the frequency. The claim is made that a low-pass Butterworth filter of order n has a roll-off (attenuation) of 6n dB/octave. Calculate the gain in dB for a second-order filter for the cut-off frequency itself, an..

#### Voltage signal is produced by a transducer

A voltage signal is produced by a transducer.  The signal contains its strongest frequency component at 50 Hz (Amplitude = 5.0 V), plus a weaker component at the second harmonic (100 Hz) with amplitude 2.0 V. In addition, there is noise at 60 Hz with..

#### Employee benefits through the lens of cultural effects

Analyse the applicable accounting standards to determine the reporting requirements under each accounting standard - executives compensations and employee benefits through the lens of cultural effects

#### Radial vortex in water rotates at a speed

A radial vortex in water rotates at a speed of 3 radians/sec. The center of the vortex is also moving downstream at a linear velocity of 2 ft/sec. Create a plan-view plot that shows the path line of a fluid particle that rotates at a fixed radius of ..

#### Determine the reading of the pressure gauge

A 400 L rigid tank contains 5 kg of air at 25 degrees C. Determine the reading of the pressure gauge if the atmospheric pressure is 97 kPa.

#### Compose an essay using at least three csu library

Compose an essay using at least three CSU library references in which you do the following:  Contrast the differences between a project and a process.?  Explain why project management is often used to train future senior executives.

#### Air undergoes a polytropic process in a piston cylinder

Air undergoes a polytropic process in a piston cylinder from p1=1bar, T1=295K to p2=7bar. The air is modeled as an ideal gas and kinetic and potential energy effects are negligible. For a polytropic exponent of 1.6, determine the work and heat transf..

#### Evaluated at the mean temperature in the slab

Prove that if k varies linearly with T in a slab, and if heat transfer is one-dimensional and steady, then q may be evaluated precisely using k evaluated at the mean temperature in the slab.

#### A volcano has erupted-spewing stones and steam

A volcano has erupted, spewing stones, steam, and ash several thousand feet into the atmosphere. After some time, the particles begin to settle to the ground. Consider a nearly spherical ash particle that is 50 microns in diameter, falling in air who..

#### Research the social and cultural aspects of the country

Research the social and cultural aspects of the country you have chosen, and discuss the demographic trends that might influence EDUS business activities in the country. Country Overview: Describe the country, its history and any pertinent inf..

### Similar Q& A

#### Define mach number and determine the type of speed an

define mach number and determine the type of speed an aircraft is flying if the aircraft speed is 880 mph at an

#### In a particular nuclear power plant the reactor is used to

in a particular nuclear power plant the reactor is used to heat water to a saturated vapor at 700 psi this vapor is

#### For the same number of air-conditioning units and the same

a room that normally contains 40 people is to be air-conditioned with window air- conditioning units of 5-kw cooling

#### Working with processes of an application to ideal gases

Working with processes of an application to ideal gases., While its temperature remains constant at 80 degrees F, 2.5lb of a certain gas, whose cp=0.28 and cv=0.2Btu/lb-degreeR

#### Combustion in a cylinder causes the pressure to increase

Combustion in a cylinder causes the pressure to increase, which moves the piston a distance (x) of 7 inches. The piston is held in place by a spring ( k=60lbfin) that was at its relaxed length before the combustion process. How much work did the expa..

#### Estimate the common logarithm of 10 using linear

estimate the common logarithm of 10 using linear interpolation.a interpolate between log80.9030900 and log121.0791812.b

#### If the tank is well insulated what will be the pressure in

a 0.2 m3 tank containing helium at bar and 22 c will be used to supply 4.5 moles per minute of helium at atmospheric

#### Discuss benefits and drawbacks of using certain materials

Discuss the benefits and drawbacks of using certain materials or certain designs in an engineering or architectural project of your choice

#### A river has a steady speed of 0461 ms a student swims

a river has a steady speed of 0.461 ms. a student swims upstream a distance of 1.00 km and swims back to the starting

#### A flange is used for instrument connection for a system

a flange is used for instrument connection for a system with a design temperature of 316degc 600degf and a design

#### The water discharges are 25 cfs to the left 5 cfs to the

for this wye fitting which lies in a horizontal plane the cross-sectional areas at sections 1 2 and 3 are 1 ft2 1 ft2

#### What is the power supplied to the cart

A 2 cm horizontal jet of water with a velocity of 15 m/s is spraying onto a vertical plate attached to a cart moving opposite the direction of the water jet at 8 m/s. Determine the force required to keep the cart moving at a constant velocity.