Determine the temperature and pressure of the steam

Assignment Help Chemical Engineering
Reference no: EM131172051

A steam power plant employs two adiabatic turbines in series. Steam enters the first turbine at 923.15 K (650°C) and 7000 kPa and discharges from the second turbine at 20 kPa. The system is designed for equal power outputs from the two turbines, based on a turbine efficiency of 78% for each turbine. Determine the temperature and pressure of the steam in its intermediate state between the two turbines. What is the overall efficiency of the two turbines together with respect to isentropic expansion of the steam from the initial to the final state?

Reference no: EM131172051

Questions Cloud

Developing a project schedule : "Developing a Project Schedule." Please respond to the following:
What is the cooling-water rate per intercooler : Water is the coolant for the intercoolers. It enters at 298.15 K (25°C) and leaves at 318.15 K (45°C). What is the cooling-water rate per intercooler?
Is this sample design an example of random sampling : Suppose you were going to conduct a survey of visitors to your campus. You want the survey to be as representative as possible. How would you select the people to survey? Why would that be your best method?
Calculate the thermal efficiency of the cycle : calculate the thermal efficiency of the cycle and the quality of the exhaust steam from the turbine for boiler pressures of 5000,7500, and 10 000 kPa.
Determine the temperature and pressure of the steam : Determine the temperature and pressure of the steam in its intermediate state between the two turbines. What is the overall efficiency of the two turbines together with respect to isentropic expansion of the steam from the initial to the final sta..
Describe your sample and your sampling method : Describe your sample and your sampling method. Explain the four steps of the research process you followed, and define the critical value and the test statistic your analysis provided. Provide the main finding of the study. What did you prove or fa..
What fraction of the steam entering the turbine : what is the thermal efficiency of the cycle and what fraction of the steam entering the turbine is extracted for the feedwater heater?
Example of an project schedule : Hello tutors any one have Microsoft Project 2013. I need a project schedule along with a 1 to 2 page paper. The paper has to be original in your own words. Also I have uploaded the instructions, an example of an project schedule, and my paper for..
What is the power requirement of the compressor : If the compressor efficiency is 0.78, what is the power requirement of the compressor and what is the discharge temperature of the methane?

Reviews

Write a Review

Chemical Engineering Questions & Answers

  How much heat is removed in the evaporator

A standard vapor compression cycle uses tetrafluoroethane as the refrigerant. The refrigerant at the exit of the condenser is saturated liquid at 90 °F; at the exit of the evaporator it is saturated vapor at 0 °F. The cycle is powered by a compres..

  Caustic concentration evaporator problem

Question - 22 25 tons of caustic solution having 10 % concentration was fed to an evaporator . the concentrated liquor leaving the evaporator contains 50% NaOH , 2 % Nacl and 48 % H2O .

  Why do some scientists dismiss mm as science fiction

It should be noted that none of those who dismiss MM are experts in the field. They may work in chemistry, biotechnology, or other nanoscale sciences or technologies, but are not sufficiently familiar with MM theory to critique it meaningfully.

  Calculate the concentration of all ions

Calculate the concentration of all ions present in each of the following solutions of strong electrolytes. a. 0.0200 mol of sodium phosphate in 10.0 mL of solution b. 0.300 mol of barium nitrate in 600.0 mL of solution

  Obtain the heat of vaporization of steam at 30 bar

1 kg of liquid water, initially at 40 °C, 2 bar, is heated under constant pressure. If the amount of heat added is 1200 kJ, determine the final temperature and the phase of the system in the final state (if vapor-liquid mixture, report the mass fr..

  Leaving the top of adistillation column

A condenser is required to condense n-propanol vapour leaving the top of adistillation column. The n-propanol is essentially pure, and is a saturated vapourat a pressure of 2.1 bara. The condensate needs to be sub-cooled to 45ŽC.Design a horizonta..

  Derive the equation for s

Problem Statement: Derive the equation for S* for competitive product inhibiton. Definition of variables:

  Find the temperature of the thermistor

The resistance of a ther mistor with a ß = 5500 measured at 188C is equal to 250 V. Find the temperature of the thermistor when the resistance is doubled.

  Determine the entropy generation in each unit

What is the maximum possible power that could be produced by a plant given the temperatures of the furnace and the river?

  Draw up a preliminary piping and instrument diagram

A polymer is produced by the emulsion polymerization of acrylonitrile and methyl methacrylate in a stirred vessel. The monomers and an aqueous solution of catalyst are fed to the polymerization reactor continuously. The product is withdrawn from t..

  Calculate the change in energy

Use the masses given in the following table to calculate the change in energy when 1 mol of 232Pu nuclei and 1 mol of 231Pa nuclei are each formed from their respective number of protons and neutrons.

  Determine the energy and entropy balances

Determine the energy and entropy balances and compare the efficiency of this process to the simple vapor-compression cycle without recirculation.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd