Determine the surface area of a 1m depth lagoon

Assignment Help Civil Engineering
Reference no: EM13313875

A well mixed sewage lagoon is to be constructed to process 100,000 gallons per day of raw sewage. The pollutant concentration in the raw sewage to be discharged into the lagoon is 200ppm. The organic matter in the sewage has been shown in a laboratory experiment to be degraded biologically according to first order kinetics. The reaction rate constant (decay coefficent) is 0.5d^-1. According to State Enviromental Protection Agency the concentration of the lagoon effluent must be below 2ppm. Determine the surface area of a 1m depth lagoon. Assume no other water losses or gains (evaporation, seepage, or rainfall) and that the lagoon is completely mixed.

Reference no: EM13313875

Questions Cloud

What is the cost per metric ton of nox removed : An emission control system for a new car costs $800 and reduces NO_x emissions from 0.4 g/mile to 0.23 g/mile. Assume the car is driven 10000 miles per year, and the life of the emissions control system is 11 years with zero scrap value.
What is the geometric nature of the geometric object : Find a vector equation for the line through the points A and B and find general equations for the line from - Find a vector equation for the plane through the points C, D and E
Determine the coliform concentration of discharge effluent : The wastewater influent has a linear velocity of 0.5m/s and contains 3.0x10^5 fecal coliform colony unit (CFU) per liter. Determine the coliform concentration of the discharge effluent into Back river.
How to calculate the wavelengths of the objects : Calculate the wavelengths of the following objects? c)a 83Kg athlete running exactly a 4 minute mile d)earth (mass=5.8x10^27g) moving through space at 2.8x10^4m/s
Determine the surface area of a 1m depth lagoon : A well mixed sewage lagoon is to be constructed to process 100,000 gallons per day of raw sewage. The pollutant concentration in the raw sewage to be discharged into the lagoon is 200ppm.
Description case methods : DescriptionCase methods are used to enable you to apply concepts,
Determine the mass of the cat : A cat walks along a plank (length = 4.00 m and mass = 7.00 kg).  What is the mass of the cat
Define how many gas molecules are present : 3- A 498mL sample of laughing gas, N2O, is at 30 *C and 414 torr pressure (a) How many gas molecules are present. (b) How many atoms are there
Estimate particle size that will be collected with 50percent : The inlet gas velocity is 16m/s and the particle density is 1.6 gm/cc. The working temperature of the process is 400K. Estimate the particle size that will be collected with 50 percent collection efficiency.

Reviews

Write a Review

Civil Engineering Questions & Answers

  How to determine free-flow travel time on the route

Route 1 has a free flow travel time of 4 mintutes and travel time increases by 3 minutes and for each additonal 1000 vehicle in flow, and route 2 has a free flow travel time of "b" minutes and travel time increases

  Determining the amount of investment

If they plan to increase their savings by 5% each year, how much must they invest in the first year given that they expect to earn 4% per year on their investment?

  Determine equation of elastic curve for the cantilever beam

For the loading sown, use double integration method to determine: the equation of the elastic curve for the cantilever beam, the deflection at the free end and the slope at the free end.

  Minimizing the tension tab

What should TAC , TAB and the acute angle ? between TAB and the vertical to minimize the tension TAB ? Take o and W = 1,000 N. Hint: Consider various possible force triangles and decide on inspection how to minimize TAB.

  Tightness of skid along with pump-motor

What is the solution if foundation bolt cut by some way from their bottom of skid, i mean skid base than how to keep another bolt etc for tightness of skid along with pump-motor already fittied with pipe and other fitting's too..

  Determine the detention time in hours for the chemostat

Perform a material balance on substrate (S) around a chemostat (completely mixed reactor without recycle) assuming a first-order removal for a substrate with a rate constant of 0.5 hr-1.

  Find v and q by hazen-williams for a new cast iron pipe

The 12 in diameter cast iron pipe is 2000ft long, the water surface is El 200 in the reservoir on the left B. El 175 on the right. A. Find V and Q by hazen-williams for a new cast iron pipe (Chw=130) Neglect entrance, exit and local losses.

  Explain can the system be viewed as being a pure substance

A system consists of liquid oxygen in equilibrium with oxygen vapor. How many phases are present The system undergoes a process during which some of the liquid is vaporized.

  Why is too much fluoride in drinking water a problem

A chemical mixing basin is to be designed to blend chlorine and treated wastewater. The basin flow is 700 gallons per minute and the basin dimensions are 5 feet by 5 feet by 5 feet water depth.

  Four-lane highway for adequate ssd

A horizontal curve was designed for a four-lane highway for adequate SSD. Lane widths are 12 feet, and the superelevation is 0.06 and was set assuming maximum fx.

  Determine the fine grains of low plasticity

Soil A is micaceous with an average grain relative density of 2.80, and has a high plasticity in its fine fraction. The ground quartz-feldspathic B is, with an average relative density of 2.65 and fine grains of low plasticity.

  Determine amount of coal used per day if heat of combustion

A coal fired power plant can be modeled as a heat engine. If the power output of the plant is 200 MW and the thermal efficiency is 42%, determine the amount of coal used per day if the heat of combustion from the coal is 24,000 kJ/kg.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd