Determine the settlements when a stress of 60 kpa

Assignment Help Civil Engineering
Reference no: EM13321121

A square building (15 m × 15 m in plan) is to be constructed on a site where the soil profile consists of 3m of clay with an over-consolidation ratio that varies from 5 at the surface to 2 at 3m overlying a 5m thick clay layer with an over-consolidation ratio of 2, which overlies rock. The soil properties are Cc = 0.4, Cr = 0.1 and fsat = 18 kN/m3 for both clays, and the water table is 1 m below the soil surface. Determine the settlements when a stress of 60 kPa is applied by the building. To determine the initial void ratio assume Gs = 2.65. Assume also that settlements of any sand and gravel layers can be ignored.

Reference no: EM13321121

Questions Cloud

Determine the minimum time needed for the plate temperature : Consider a 1000-W iron whose base plate is made of 0.5 cm thick aluminum alloy 2024-T6 (density = 2770 kg/m^3 and c(p)=875 J/kg C). The base plate has a surface area of 0.03 m^2.
Determine the current amplitude : a 200 ohms resistor and a .4 H inductor are connected in series with a voltage source having amplitude of 30 v, what is the current amplitude
Describe the impact of culture on managerial decision-making : Describe the impact of culture on managerial decision-making.
Explain the square of the concentration of the halide : Although the mechanism of the coupling process is not well understood, it is known that ratre appears to depend on the square of the concentration of the halide.
Determine the settlements when a stress of 60 kpa : The soil properties are Cc = 0.4, Cr = 0.1 and fsat = 18 kN/m3 for both clays, and the water table is 1 m below the soil surface. Determine the settlements when a stress of 60 kPa is applied by the building.
Which base course aggregate has a target dry density : Base course aggregate has a target dry density of 119.7 Ib/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft by 48 ft by 6 in.
Explain the empirical formula of a compound composed : What is the empirical formula of a compound composed of 3.25% hydrogen, 19.36% Carbon, and 77.93% oxygen by mass
What is the power drawn from the electric outlet : An AC adapter for a telephone answering machine uses a transformer to reduce the line voltage of 120 V to a voltage of 7.00 V. What is the power drawn from the electric outlet
Explain balnace the half reactions in an acidic solution : Balnace the following half reactions in an acidic solution a) MnO4 -(aq)---- MnO2(s) b) IO2- (aq)----Io4-(aq) based on (a) and (b) above, write balanced redox eqautions of (A) in an acidic solution MnO4-(aq) + IO3_(aq)----MnO2(s) + IO4- (aq) (A)

Reviews

Write a Review

Civil Engineering Questions & Answers

  Create a primary function

create a primary function that uses a function handle with a nested function to compute the ninimum of the function 20x^2-200x+12 over the range 0

  Determine tension in each cable and reaction at socket joint

A 10 ft. boom is acted upon by the 840-lb force. Determine the tension in each cable and the reactionat the ball-and-socket joint at A.

  Find how long until the concentration of fluoride is reduced

During a snowstorm the fluoride feeder in North Bend runs out of feeder solution. The rapid mix tank is connected to a 5-km long distribution pipe. The flow rate into the rapid mix tank is 0.44m^3/sec, and the volume of the tank is 2.50 m^3.

  Find invert of stilling basin require to form hydraulic jump

The subcritical water level in the channel downstream from the stilling basin is at an elevation of 100 feet above the datum. assume no energy loss over the spillway, determine the invert of the stilling basin required to form a hydraulic jump in ..

  What must the hydraulic detention time be in aeration pond

A perfectly mixed aeration pond with no recycle (return line) serves as the biological reactor for a small community. The pond receives 30 cubic meters/day of influent with a BOD5 of 350 mg/L that must be reduced to 20 mg/L before discharge.

  Determine what is the force in the wire and beam

The 5-m long cantilever beam using a W410 x 67 standard wide flange section has a distributed load of 1200 N/m placed on it. It is also supported by a cable at B, of length 2 m with a 7 mm2 cross sectional area. What is the force in the wire

  How many short tons of coal are required

How many short tons of coal are required by this plant per year, assuming it operates continuously? If 10% of the coal mass remains as residual ash, how many tons will develop in the ash pile over 25 years?

  Calculate the ph of a drop of pure rainwater at a temp

. In order to get full credit for this problem you must list all unknown species that would exist in the raindrop and all pertinent equations regardless of their level of significance. You must algebraically solve the equations to determine pH.

  Determine the required detention time and required volume

A dispersed plug chemical reactor has an influent flow with concentration of 150 mg/L of A and a flow rate of 100 gal/min (380 L/min). The reaction is first order, The rate equation : - dC/dt = kC= -r , and the rate constant is 0.4 h^-1 .

  Compute required weight of coarse aggregate per cubic yard

A concrete mix with a 3-inch slump, w/c ratio of 0.50, and sand with a fineness modulus of 2.4 contains 1700 lb/yd^3 of coarse aggregate. Compute the required weight of coarse aggregate per cubic yard.

  Help with a site plan

Help with a site plan - Design on paper to add some other things in it.

  Determine the time it takes to break the cord

A 3 kg mass is attached to one end of a 1 m long cord. The other end of the cord is attached to the center of a rotating disk (with radius greater than 1 m) that has a very large constant angular velocity.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd