Determine the required mass of block a from rest

Assignment Help Civil Engineering
Reference no: EM13319380

Determine the required mass of block A so that when it is released from rest it moves the 5-kg block B a distance of .75m up along the smooth inclined plane in t=2s. Neglect the mass of the pulleys and cords.

Reference no: EM13319380

Questions Cloud

Find the degree of saturation and water content : A moist soil sample wights 346g.After drying at 105 degree celsius it then wights 284g. the specific gravity of the mass and of the soil is 1.86 and 2.70.
Explain how calculate the molarity of the hydroxide ion : Calculate the molarity of the hydroxide ion (OH-) for this final mixture (51.5mL) Please do not tell me to do Y while leaving out X and Z
Determine the force in the rod for the temperature : The rod is made of a-36 steel and has a diameter of .25 in. if the springs are compressed 0.5 in when the temperature of the rod is T=40F, determine the force in the rod when its temperature is T=160 F.
Explain barium nitrate and nickel bromide versus : Why would a mixture of salts be more difficult to identify than a single salt? For example, copper sulfate, barium nitrate and nickel bromide versus only nickel bromide.
Determine the required mass of block a from rest : Determine the required mass of block A so that when it is released from rest it moves the 5-kg block B a distance of .75m up along the smooth inclined plane in t=2s. Neglect the mass of the pulleys and cords.
How long would take layer to reach 30percent consolidation : how long would it take a layer of this clay 5m thick to reach the same degree of consolidation under the same stress and drainage conditions. how long would it take the layer to reach 30% consolidation.
Explain the frequency of the absorption from the ground : Use the Boltzmann equation to calculate the excited-state and ground-state population ratio for HCl (g*/g0=1) at room temperature (25 oC). The frequency of the absorption from the ground to the excited state is 2885 cm-1. What is the population ra..
Define and develop an innovative entrepreneurial : Define and develop an innovative entrepreneurial or intrapreneurial (intraorganizational) business opportunity in the field of e-commerce.
How old is the specimen : An archeological specimen containing 3.4g of carbon has an activity of 0.33 Bq. How old (in years) is the specimen

Reviews

Write a Review

 

Civil Engineering Questions & Answers

  Alternative water resource projects

Consider two alternative water resource projects, A and B. Project A will cost $2,533,000 and will return $1,000,000 at the end of 5 years and $4,000,000 at the end of 10 years.

  How long will take until the height is 1 m above the orifice

A tank with a 3m diameter has an 8 cm orifice at the bottom. The tank is currently filled with water to a height of 2.5m above the orifice. If the orifice is opened, how long will it take until the height is 1 m.

  Determine will h increase or decrease and by how much

an air space above a long tube is pressurized to 50 kPa vacuum. water (20 degrees C) from a reservoir fills the tube to a height h. If the pressure in the air space is changed to 25kPa vacuum, will h increase or decrease and by how much

  What is the mean momentum flow rate down the pipe

laminar flow of a real fluid down a cylindrical pipe of constant radius R. Poiseuille showed that the velocity profile was parabolic and given by u(r)=c(R^2-r^2), where r is the radial coordinate and c is a dimensional constant.

  Determine the heat transfer rate from the compressor

In a refrigeration system Refrigerant 22 enters the compressor at 150 kPa and -10 C. It leaves the compressor at 1.0 MPa and 90 C. Assume the mass rate of flow through the compressor is 0.016 kg/s

  Determine what is the total elongation of the pipe

a prismatic bar AB of length L, cross section A, modulus of elasticity E, and weight W hangs vertical under its own weight. if the bar is a riser pipe hanging from a drill rig at sea, what is the total elongation of the pipe

  Calculating energy for vacancy formation

The number of vacancies in some hypothetical metal increases by a factor of 4 when the temperature is increased from 1090 K to 1140 K. Calculate the energy (in J/mol) for vacancy formation assuming that the density of the metal remains the same ov..

  Determine what is the maximum column load in kips

What is the maximum column load in kips that could be placed on a 4-ft square temporary footing on a sand for which the standard resistance is about N=15 and the water table is at the surface? A factor of safety of 2 is to be maintained against be..

  Determine what is the maximum flow rate that can be pumped

assume the pipe diameter is 4-inches, (f = 0.035), Distance from BC is 15-feet, distance DE is 180-feet and z = 60-feet. The elevation of C is 10-feet above the lower water surface.

  Sketch and label vi-vo and vn versus time

An inverting amplifier is implemented with a R1=10 kilo Ohms and R2= 100 Kilo Ohms, and an op amp with finite open-loop gain a=10^3 V/V. Sketch and Label Vi,Vo,and Vn versus time if Vi is a 1-kHz triangular wave

  Calculate the specific volume and density at a pressure

Assuming steam to be an ideal gas, calculate its specific volume and density at a pressure of 90 lb/in^2 and a temperature of 650°F.

  Acceleration along a pathline

The velocity along a pathline is given by V (m/s) = s^2 x t^(1/2) where s is in meters and t is in seconds. The radius of curvature is 0.5 m. Evaluate the acceleration along and normal to the path at s = 2m and t = 0.5 seconds.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd