Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
A balanced delta-connected load with a per-phase impedance of 30 + j10 Ω is connected in parallel with a balanced wye-connected load with a per phase impedance of 40-j10 Ω. This load combination is connected to a balanced three-phase supply through three conductors, each of which has a resistance of 0.4 Ω. The line-to-line voltage at the terminals of the load combination is measured to be 2000 V. Determine the power in kW:
(a) Delivered to the delta-connected load.
(b) Delivered to the wye-connected load.
(c) Lost in the line conductors.
The area of each plate in a differential capacitor sensor is equal to 4 cm2. Calculate the equilibrium capacitance in air for each capacitor assuming that the equilibrium displacement for each capacitor is equal to 2 mm.
How many kg of benzene are condensed by this process per 1000 m3 of the original mixture if the vapor pressure of at 21.1oC is 75 mm Hg?
Consider the solenoid with a core of square cross section shown in Figure P12.4.6.
One type of commercial smoke detector contains a minute amount of radioactive americium-241 (241Am), which decays by -particle production.
In the direct steelmaking reactor based on the reduction of an oxidizing foaming slag by char (carbon) particles and droplets of iron containing 2% carbon. Estimate the total surface area of char and iron droplets needed to achieve the smelting ..
If the motor is operating on load with a power angle of -20°, and the excitation is adjusted so that the excitation voltage is equal in magnitude to the terminal voltage, determine the armature current and the power factor of the motor.
Burning the coke deposited on the catalyst particles generates all the heat necessary for catalytic cracking. Therefore, the coke burning rate is a critical parameter to control the rate of cracking. The composition of dry flue gas from the regenerat..
hello miss ankita gupta i just excuse you to help me in the simulation of this problem A liquid mixture contains N components (N may be any number from 2 to 10) at pressure P(mm Hg). The mole fraction of the ith component is xi (i = 1. 2...., N), ..
Methanol can be manufactured by the gas phase reaction CO(g) + 2H2(g)?CH3OH(g)at 400K and 1.013 bar.The following data are available;?H298= -90.71 kJ/mol?G298= -24.33 kJ/mol.
Assuming that the flux corresponding to a current of 25 A is 40% of that corresponding to a current of 100 A, determine the motor speed at a line current of 25 A at 250 V.
Temperature variations are small over the shaft cross section. Evaluate the temperature and conduction heat rate at the shaft-pipeline joint (x = 0) and at the shaft-ground interface (x = 1 m)
Problem 1 Provider JCN Bell Comtron Choose? No. of problems 50 100 250 MTBF (hours) Mean Time to Reach Customer Mean Time to Fix Problem 3 2 1 2 1 0.5 System Availability Problem
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd