Determine the necessary number of lanes

Assignment Help Other Engineering
Reference no: EM131142288

A freeway is being designed for a location in mountainous terrain. The expected free-flow speed is 55 mi/h. Lane widths will be 12 ft and shoulder widths will be 6 ft.

During the peak hour, it is expected there will be a directional peak-hour volume of 2700 vehicles, 12% large trucks and buses and 6% recreational vehicles. The PHF and driver population adjustment are expected to be 0.88 and 0.90, respectively.

If a level of service no worse than D is desired, determine the necessary number of lanes.

Reference no: EM131142288

Questions Cloud

Prepare a table of contents for communications manual : Prepare a table of contents as an outline for your communications manual.- The subheading should include- an example scenario of how this topic should be handled in your company
Determine the maximum number of large trucks : If a level of service no worse than C is desired, determine the maximum number of large trucks and buses that can be present in the peak-hour traffic stream.
What value for the driver population factor was used : If the peak-hour traffic volume is 3900 vehicles, what value for the driver population factor was used?
What is the nash equilibrium : Give an example of a game in which only one player has a dominant strategy. What is the Nash equilibrium?
Determine the necessary number of lanes : The PHF and driver population adjustment are expected to be 0.88 and 0.90, respectively - If a level of service no worse than D is desired, determine the necessary number of lanes.
Estimate future fcf for fiscal year : Estimate future FCF for fiscal year 2016 based on the following information- Forecasted numbers for fiscal year 2016: EBIT=100, Capital expenditure=60, Depreciation=30, total working capital=60. The working capital currently is 52. Marginal tax ra..
Service of compound grade freeway segment : The total ramp density for this freeway segment is 2.33 ramps per mile. If the peak hour factor is 0.90 and all of the drivers are regular users, what is the level of service of compound grade freeway segment?
Discuss how the artist used two principles of design : Identify and discuss how the artist used TWO PRINCIPLES OF DESIGN (your choice from the design principles listed in the text). Give at least two or three specific examples of how each principle is used and use appropriate terminology.
What will the freeways density and level of service : What will the freeways density and level of service be before and after the ban? (Assume that the trucks are removed and all other traffic attributes are unchanged.)

Reviews

Write a Review

Other Engineering Questions & Answers

  Review and analyse the role of engineers as managers

This assignment addresses, in part, some of the following objectives for the course as outlined in the course specification:

  What is the power being dissipated in the device

A power transistor is specified to have a maximum junction temperature of 150C. When the device is operated at this junction temperature with a heat sink, the case temperature is found to be 97°C. The case is attached to the heat sink with a bond ..

  Design an eco-optimized container for fizzy drinks

The objective of the class assignment is to design an eco-optimized container for fizzy drinks using eco design tool  (CES)

  Esfandyar illustrate the preferred quality of societal stand

This discussion continues our examination of the hero. Esfandyar is the quintessential hero in Persian culture. We will investigate and discuss how Esfandyar may set standards for his culture and how his journey and interactions with other char..

  Design latest version of that where it can show exact level

Design a latest version of that where it can show exact level of the water in over head tank by using a seven segment display.

  Calculate the positive-sequence inductance

A 60-Hz three-phase, three-wire overhead line has solid cylindrical conductors arranged in the form of an equilateral triangle with 4 ft conductor spacing. Conductor diameter is 0.5 in.

  Problems based on nyquist sampling theorem

What is the definition of "Nyquist rate"? What is the "Nyquist sampling theorem"? Plot the signal ??(??) = sin(4????).

  Identifying employment relationship strategic decisions

The difference between 'control' and 'commitment' employment relationships in the workplace. Select the one you support and explain why.

  Determine the force on the circular strut

Determine the force on the circular strut that extends across the duct. The upstream and downstream pressures

  Depth of the liquid incentimeters

A horizontal cylindrical drum is 2.00m in diameter and 4.00 m long. The drum is slowly filled with benzene (density = 0.879g/cm3). Derive a formula for W, the weight in Newton's of the benzene in the tank, as a function of h, the depth of the liqu..

  Formulate a minimum cost flow problem

Represent the above problem as a network optimization problem. Particularly, you will need to formulate a minimum cost flow problem. Draw the network by defining the nodes, node values, and what they represent; and, the arcs, arc costs, arc capaci..

  Find the value of ron

The CMOS inverter of Fig. is implemented in a 0.13-μm process for which μnCox =500 μA/V2, μpCox = 125 μA/V2, Vtn =-Vtp =0.4 V, and VDD 1.2 V. The NMOS transistor has (W/L)n = 1.5. What must (W/L)p be if QN and QP are to have equal Ron resistances..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd