Determine the mass flowrate through boiler

Assignment Help Civil Engineering
Reference no: EM1384555

An ideal reheat Rankine cycle with water as the working fluid operates the inlet of the high pressure turbine at 800Kpa and 450°C. The inlet of loe pressure turbine is 500Kpa and 500°C. Condenser operates at 10 Kpa. Determine the mass flowrate through boiler needed to produce 5000KW of power.

Reference no: EM1384555

Questions Cloud

Why motherboard sometimes support more than one speed : Why does motherboard sometimes support more than one system bus speed? So that it can support different processors running at different speeds.
Explain whether additional compensation might need : Explain whether additional compensation might need to be offered as a result of your plan to change job designs and work measurements.
Illustrate what are the steps in the planning process : Illustrate what types of plans does your organization use and explain why do they use these plans? Illustrate what are the steps in the planning process?
Find out the location : The radius of curvature of a convex mirror is 1.60 x 10^2 cm. An object that is 14.0 cm high is placed 40.0 cm in front of this mirror. Find out (1) the location and (2) the height of the image.
Determine the mass flowrate through boiler : The inlet of loe pressure turbine is 500Kpa and 500°C. Condenser operates at 10 Kpa. Determine the mass flowrate through boiler needed to produce 5000KW of power.
Based approach versus the goal approach : Illustrate what are the advantages and disadvantages of the resource- based approach versus the goal approach for measuring organizational effectiveness?
How many radians does radius automobile tire rotate : A meteoroid is speeding throughout the atmosphere, travelling east at 16.80 km/s while descending at 13.60 km/s. What is its speed in km/s.
Genotypic and phenotypic classes : If these three genes were all assorting independently, how many genotypic and phenotypic classes would result in the offspring, and in what proportion, suppose simple dominance and recessiveness in each gene pair?
Illustrate what action should metabo-miracle take : Thousands of consumers purchase the products and about 200 of those consumers call in with complaints the product was ineffective. Illustrate what action should Metabo-Miracle take?

Reviews

Write a Review

Civil Engineering Questions & Answers

  Estimating the volume of soil in cubic meters

The void ratio of soil in the borrow pit is 1.12. Estimate the volume of soil (cubic meters) that must be excavated from the borrow pit.

  Effective vertical stresses of the clay layer

The saturated unit weight of the clay is 20kN/m 3 and that of the sand 19 kN/m 3 ; above the water table the unit weight of the sand is 16.5 kN/m 3 . Calculate the effective vertical stresses at the top and bottom of the clay layer.

  Determine the angle of twist

A beryllium copper wire having diameter of 1-50 mm and length of 40mm is used as a small torsion bar in an instrument. determine what angle of twist would result in the wire when it is stressed to 250 mpa.

  Determining the compressive strengths

Determine the compressive strengths of the following: A) A 6-in. diameter concrete cylinder that failed at ta test load of 135,000 B) A-3-in. diameter specimen that failed at a test load of 30,000

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Calculate the total drilling cost

Calculate average figures for tonnes/round and powder factors in kg/tonne and Determine the drill metres required to achieve a production rate from grade control blasting.

  Comparative analysis of the types of safeguards

Provide a comparative analysis of the types of safeguards would you suggest for the company's information system.

  Prtoblem on uniform decelerated motion

Assuming uniformly decelerated motion, determine the velocity and acceleration of point C of the belt, (a) immediately before the power is turned off. (b) 9 s later.

  Magnitudes of fac and fad

The 70 m tall tower is supported by three cables that exert forces FAB, FAC, and FAD on it. The magnitude of the force FAB is 2 kN. The x and z components of the vector sum of the forces exerted on the tower by the three cables are zero. What are ..

  Determine the flow rate of the oil

Oil of a specific gravity of 0.75 is flowing through a 6-in pipe under a pressure of 15 psi. If the total energy relative to the datumplate is 8.0 ft below the center of the pipe is 58.6 ft, determine the flow rate of the oil.

  Determine the volume flow rate of water

Water with a static pressure of 1.96kN/M 2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M 2 . How do you determine the volume flow rate (Q) of the water? (Q = 1.40 M^3/sec, V=2.79 M/se..

  A sewage treatment works stw

A sewage treatment works (STW) with 4 single-stage trickling filters has become organically overloaded due to the discharge of a biodegradable industrial effluent to the STW. This is causing effluent to pond on the surface of the filters.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd