Determine the lift and drag coefficients

Assignment Help Mechanical Engineering
Reference no: EM131369866

1. A rectangular wing with an aspect ratio of 6 is to generate 1000 lb of lift when it flies at a speed of 200 ft/s. Determine the length of the wing if its lift coefficient is 1.0.

2. A 1.2-lb kite with an area of 6 ft2 flies in a 20-ft/s wind such that the weightless string makes an angle of 55° relative to the horizontal. If the pull on the string is 1.5 lb, determine the lift and drag coefficients based on the kite area.

Reference no: EM131369866

Questions Cloud

What is the probability that stock b went up as well : Two stocks A and B are known to be related in that both are in the same industry.- What is the probability that stock B went up as well?
What might invidious claim in defense : A water pipe bursts, flooding an Invidious Workplace Company utility room and tripping the circuit breakers on a panel in the room. Invidious contracts Jordan, a licensed electrician with five years experience, to check the damage and turn the breake..
Write a response about the given post : Over the past 16 years, only two building permits for new housing construction have been issued in Sedgwick County, Colorado. This is consistent with the depopulation (particularly of younger persons) and economic diminution that is attributed to ..
Was this contract voidable or valid and enforceable : One day he enters a contract with your company to hire you to build him a gigantic workshop in his backyard so he can build his toys and stable his "eight tiny reindeer." In return he will pay you $120,000 for the construction. When his wife learn..
Determine the lift and drag coefficients : A rectangular wing with an aspect ratio of 6 is to generate 1000 lb of lift when it flies at a speed of 200 ft/s. Determine the length of the wing if its lift coefficient is 1.0.
The probability that production will increase : What is the probability that, for the period in question, both the interest rate will decline and production will increase?
Personal belongings to be mixed with company property : Employees often bring their personal belongings to work, for whatever reason. Sometimes it's pictures of their family, sometimes their own pen, or a back pillow, or foot rest, etc. In those situations, should the employee anticipate their personal be..
Explain a business situation in which rory : Explain a business situation in which Rory should use a written contract for her doggy day care business. Write a contract for the business situation you identified, making sure to include key terms to protect Rory's business interests.
Is given potential buyers perception are independent : Based on this information, do you believe that potential buyers' perceptions of the two features are independent? Explain.

Reviews

Write a Review

 

Mechanical Engineering Questions & Answers

  The piston pressure is released in three stages first to 5

one mole of an ideal gas at t 25 degc is held in a cylinder by a piston at a pressure of 1 x 107 pa. the piston

  Determine the diameter of the largest voids

The atomic radius of iron is 0.129 nm and it has a bcc unit cell at room temperature and an fcc unit cell at high temperature. One of the largest void is located at (1/2,1/4,0) in the bcc unit cell, and at (0,1/2,0). Determine the diameter of the lar..

  Find the work done if the system is at the initial

a system has an initial volume of 10 ft3 and expands to a final volume of 20 ft3. the initial pressure is 14.7 psi.

  A 65 wt ni-35cu alloy is heated to temperature within the

a 65 wt ni-35cu alloy is heated to temperature within the apha liqquid-phase region. if the compostiong of the alpha

  A ships hull is 150m long as has a wetted area of 5000 m2

a ships hull is 150m long as has a wetted area of 5000 m2. when it is encrusted with barnacles it requires 7000 hp to

  Calculate uncertainty in mass of filled yogurt containers

In a yogurt-filling line the containers are filled with 1 kg of yogurt. The mass of the yogurt is measured while the filling nozzle is open. The nozzle flow rate is 0.20 Kg/sec. Several factors affect the flow rate, including the density and the visc..

  Determine the distance to the centroid c of composite area

Determine the distance to the centroid C of the composite area shown in the figure.

  How much power is being dissipated by the circuits

A high-speed NMOS microprocessor has a 64-bit address bus and performs a memory access every 50 ns. Assume that all address bits change during every memory access, and that each bus line represents a load of 10 pF.

  Perpendicular to the centroidal axis of the column

Assume E=31 ,000 MPa and ν=0.2 εa=-222x10-6 , εb=-213x10-6 , εc=45x10-6 Where gauges a, b and c are in line with, at 450 to and perpendicular to the centroidal axis of the column, respectively.

  Find temperature increase that would cause the bar to buckle

The solid aluminum bar of circular cross section is fitted snugly between two immovable walls. Determine the temperature increase that would cause the bar to buckle. Use E = 10:3 × 106 psi and α = 12:8 × 106/°F for aluminum.

  Atypical bacterial motor turning at a constant angular

some bacteria are propelled by biological motors that spin hair-like flagella. a typical bacterial motor turning at a

  Determine the mass flow rate of the liquid stream entering

A fan located within the tower draws in atmospheric air at 17°C, 0.098 Pa, 60% relative humidity with a volumetric flow rate of 110 m3/min. Saturated air exits the tower at 30°C, 0.098 MPa. The power input to the fan is 8 kW. Ignoring kinetic an..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd