Determine the inclination theta of the ladder

Assignment Help Civil Engineering
Reference no: EM13313614

The 160- man climbs up the ladder and stops at the position after he senses that the ladder is on the verge of slipping. Determine the inclination θ of the ladder if the coefficient of static friction between the friction pad A and the ground is μs= 0.3. Assume the wall at B is smooth. The center of gravity for the man is at G. Neglect the weight of the ladder.

Reference no: EM13313614

Questions Cloud

Calculate minimum force he must exert to get moving back : a contestant in a winter games event pushes a 31 kg block of ice across a frozen lake. the coefficient of static friction is 0.1, Calculate minimum Force he must exert to get moving back
Determine the commissions paid to specific employees of sale : Design a query that will allow the finance department to determine the commissions paid to specific employees of the sales department for the month of December.
Determine when the crates begin to slide at an angle : Crates A and B weigh 300 lb and 110 lb, respectively. They are connected together with a cable and placed on the inclined plane. If the angle θ is gradually increased, determine when the crates begin to slide.
What is the linear speed of a point on its edge : a grindstone has a radius of 6.00 cm and rotates at 7000 rpm. What is the linear speed of a point on its edge
Determine the inclination theta of the ladder : Determine the inclination θ of the ladder if the coefficient of static friction between the friction pad A and the ground is μs= 0.3. Assume the wall at B is smooth. The center of gravity for the man is at G.
What is the difference in air pressures : Hurricane winds of 95 m/h are blowing over the flat roof of a well sealed house. What is the difference in air pressure between the inside and outside of the house
Determine all components at the reactions at the pin support : The compound beam assembly shown is made up of 4 members connected by pins and is supported by hinges/pins at A and E. L= 2.6m (L is the lengthD to E) , and w= 60 (w is the load-lines) .
What is the full path the to location of the web application : suppose that you are creating a java web application named "cset-test" consisting of a JSP file named "main.jsp" , and a java Servlet in a file named "InfoServlet.java". The user's home directory is /home/jdoe.
Determine what is the max distance between inlets : A suburban street receives storm water runoff at a rate of 2.0 L/m-s (one each side). the street has a slope of .8 percent and a cross slope of 2 percent, n = .013.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find what is the flow in cfs if the pressure at 3 diameter

Oil (specific gravity 0.752) flows through a 6" horizontal pipe under a pressure of 60 psi. Assuming no losses, what is the flow in cfs if the pressure at a 3" diameter reduction is 20 psi

  Coefficient of permeability of concrete

How does aggregate size influence the coefficient of permeability of concrete? List other factors that determine the permeability of concrete in a structure.

  Determine what is the maximum intensity

During a 60 minute storm the following amounts of rain fell during successive 15 minute intervals: 33mm, 23mm, 15mm, and 5mm. What is the maximum intensity

  What are the concentrations of h2po4- and hpo42-

The total phosphate concentration (TOTPO4) in a river is 3.2 mg/L as P. The pH of the river is 7.8. What are the concentrations of H2PO4- and HPO42-

  Calculate pi if sample falls with the control charts limits

A sample with a measured background level (Bi) of 22 mg/l was spiked with the equivalent of 30 mg/l without appreciably changing the sample volume. The result for the spiked sample (Ai) was 49.2 mg/l. Calculate Pi and determine if it falls with th..

  Which would be the strongest and highest bmelting point

explain how mechanical strength, melting temperature , and thermal exapntion are related at the atomic level. specifically, how do they relate to each other and the bonding energy between the atoms.

  What is the design speed of he curve

An equal-tangent crest vertical curve is designed with a PVI at station 110+00 and a PVC at station 107+43.3. if the high point is station 110+75.5 what is the design speed of he curve?

  Determine the elevation of the lowest point of the curve

A 400ft equal-tangent sag vertical curve has its PVC at station 200 + 00 and elevation 250ft. The initial grade is -5.0% and the final grade is +2.5%. Determine the elevation of the lowest point of the curve.

  Maximum rod diameter on lathe machine

If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)?

  Identify the forces that work against success of cladding

Identify the forces that work against the success of cladding systems in keeping the elements out.

  Provide a diagram showing the cost of the truss as function

A project for constructing a Facility just started. It involves the excavation of 40 to 60 feet deep and 60 feet wide trench to house double tunnels. A 24-inch outside diameter (22.5-inch inside diamater) water line is located in the path of the t..

  Determine what is the largest allowable magnitude of f2

A square with the dimensions of .02m by .02m by .5m is attatched to a solid surface. If the forces on the rod are too large, it will either crush or be sheared off where it is atatched to the solid surface.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd