Determine the flow rate and the normal depth in the channel

Assignment Help Civil Engineering
Reference no: EM13304517

A reservoir discharges into a long trapezoidal channel with a bottom width of 20 feet, 3 to 1 side slopes, a bottom slope 0.001 and a roughness coefficient of 0.025 the reservoir surface is 10 feet above the invert at the channel entrance for channel transition loss coefficients. Determine the flow rate and the normal depth in the channel KL = 0.2; ANSWERS : Yn = 9.34, Q = 2678 cfs

Reference no: EM13304517

Questions Cloud

Determine the maximum force the hand can apply : assume that the whole twisting moment is taken by the bone. If the humerus can withstand a shear stress Tmax=70.0 MPa, determine the maximum force the hand can apply without fracturing the humerus. The length of the forearm is 360 mm.
Calculate the persons mass : A playground carousel is free to rotate about its center on frictionless bearings, and air resistance is negligible. What is the person's mass
Determine the location of the hydraulic jump : the flow rate is 600 cfs. for a long distance upstream the bottom slope is 2.5%. the bottom slop of the channel abruptly changes to 0.6% and continues at that slope for a long distance determine the location of the hydraulic jump.
Find the acceleration of the center of mass of lower disk : Two disks have equal masses, m, and radii, R. Their moments of inertia are each .5mR^2. find the acceleration of the center of mass of the lower disk
Determine the flow rate and the normal depth in the channel : A reservoir discharges into a long trapezoidal channel with a bottom width of 20 feet, 3 to 1 side slopes, a bottom slope 0.001 and a roughness coefficient of 0.025 the reservoir surface is 10 feet above the invert at the channel entrance
What is the period of oscillataions for this system : In a mass-spring system, the mass of the object is 80g and the spring constant is 200N/m. What is the period of oscillataions for this system
Determine what would the population be in 25 years : Nairobi has a birth rate of 3.3 individuals per individual per year and a death rate of 3.2 individuals per individual per year. If the carrying capacity were 105, what would the population be in 25 years
What the consequences of such misevaluations might be : Briefly explain what the consequences of such misevaluations might be. If appropriate, offer any thoughts on possible remedies.
What is the largest size vehicle : A 7.6 cm diameter horizontal pipe gradually narrows to 4.8 cm . When water flows through this pipe at a certain rate, What is the largest size vehicle

Reviews

Write a Review

Civil Engineering Questions & Answers

  Mixed liquor volatile suspended solids

For a mixed liquor volatile suspended solids (MLVSS) of 1800 mg/L, what is the total return solids flow rate?

  Determine the design speed and length of the curve

A horizontal curve is designed for a two-lane road in a mountainous terrain. The following data are known: Deflection angle: 40 degrees Tangent: 436.76 Station of PC: 2695 + 73.89 Side friction factor = 0.12 Superelevation = 8% Superelevation run-off..

  Explain how the difference in piezometric pressure

A manometer is used to measure the pressure difference between points A and B in a pipe. Water flows in the pipe, and the specific gravity of the manometer fluid is 2.8. The distances and manometer deflection are indicated.

  Determine the speed at which the ball is kicked

The ball at A is kicked such that theta=30 degrees. If it strikes the ground at B having coordinates x=15 ft, y= -9ft, determine the speed at which it is kicked and the speed at which it strikes the ground.

  Calculate the angle a between the vectors a and c

If A cross product B = the vector C, calculate the angle "a" between the vectors A and C and between the angle "b" between the vectors B and C.

  Problem on coefficient of rolling resistance

What is the minimum distance from the stalled car at which the driver could apply the brakes and still stop before hitting it? Assume coefficient of rolling resistance of 0.013.

  Determine what will be the max torque of a solid steel shaft

A solid steel shaft of circular cross section and diameter 6 inches in pure torsion under torque. If E=30x10^6 pse and max shear stress is 30 ksi, calculate the torque. If the shaft was hollow, with an innner diameter of 2 inches and outer diameter..

  Define a proposal

In my english class i have to write a propasl, and i choose to write a proposal on the libray doors at my school. the doors are very difficult to open even for young people like my self. who should i contact

  Determine the station where tangent runout starts

The station of a PI of a horizental curve is 60+20. The horizental curve has a degree of 4 and a length of 400ft. the othere given design perameters include. Superelevation runoff rate is 1/400. width of the pavement is is 15ft.

  Calculate the force n exerted by the fixed circular slot

At the instant when angle theta= 50 degree, the horizontal guide is given a constant upward velocity v0 = 1.3 m/s. For this instant calculate the force N exerted by the fixed circular slot and the force P exerted by the horizontal slot on the 0.60..

  Calculate the cost per kg charged by these two suppliers

Our laboratory plans to use one, 10-liter tank of refrigerant 134a every week. So off you go to check the cost of fill-ups at the two possible suppliers. At Chem Mart, the filled tank is returned to you at 10 bar and 90 C for $10.00.

  Electron and hole motions in a p-n junction

Briefly describe electron and hole motions in a p-n junction for forward and reverse biases; then explain how these lead to rectification.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd