Determine the effect of fuel grade in fuel efficiency

Assignment Help Civil Engineering
Reference no: EM13317054

To determine the effect of fuel grade in fuel efficiency, 80 new cars of the same make with identical engines, were each driven for 1000 miles. Forty of the cars ran on regular fuel, and the other forty received premium grade fuel. The cars with the regular fuel averaged 27.2 miles/gal with a standard deviation of 1.2 miles/gal. The cars with the premium fuel averaged 28.1 miles/gal with a standard deviation of 2.0 miles/gal. Can you conclude that this type of car gets better mileage with premium grade fuel?

Reference no: EM13317054

Questions Cloud

Calculate the specific heat of the unknown substance : An unknown substance has a mass of 0.125 kg and an initial temperature of 80.0°C. calculate the specific heat of the unknown substance
Conclude that the mean cost of the new method is less : It is thought that a new process for producing a certain chemical may be cheaper than the currently used process. Each process was run 6 times, and the cost of producing 100-L of the chemical was determined each time.
Write a bioperl-based script : Write a BioPerl-based script ("pick-by-id.pl") to extract sequences by id. It will emulate the "blastdbcmd -db -entry" command. Use "GBB.pep" and "BBA15" as the two arguments.
Compute the mass of the aluminum cup : What mass of water at 30.0°C must be allowed to come to thermal equilibrium with a 2.15-kg cube of aluminum initially at 1.50 × 102°C to lower the temperature of the aluminum to 77.0°C? compute the mass of the aluminum cup
Determine the effect of fuel grade in fuel efficiency : To determine the effect of fuel grade in fuel efficiency, 80 new cars of the same make with identical engines, were each driven for 1000 miles. Forty of the cars ran on regular fuel, and the other forty received premium grade fuel.
Conclude that the mean concentration of silica is less : Measurements of groundwater concentrations of silica (SiO2) in mg/L, were made at a sample of 12 wells in Birmingham. The sample mean concentration was 61.3 and the standard deviation was 5.2.
Find the total charge in entropy of the mixture : Suppose 1.00kg of water at 100 degrees Celsius is mixed with 1.00kg of water at 0 degrees Celsius. What is the total charge in entropy of the mixture
How many of the incinerators in chicago meet the standard : Stack gas samples were collected from a sample of 50 incinerators in Chicago. Of the 50 samples, only 18 met an environmental standard for the concentration of a hazardous compound. Can it be concluded that fewer than half of the incinerators in C..
Determine confidence interval for the mean shear strength : The specimens cured at 150oC had an average shear strength of 620 psi, with a standard deviation of 20 psi. Those cured at 130oC had an average shear strength of 750 psi, with a standard deviation of 30 psi.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Define coil spring which has been compressed

Question about Spring, A 37kg object is placed onto a coil spring which has been compressed 43mm. The force used to compress the spring was 35KN.

  What fraction of the total ammonia-nitrogen is in volatile

Ammonia is a gas whose smell we detect in manure, cleaning products, and other things. The concentration of this noxious gas can be controlled by regulating the pH of the water because only the non-protonated form, NH3, is volatile.

  Estimate energy release rate by using regression equation

A concrete building has floor area 10 m by 20 m and is 4 m high. THe building has four windows with a height 1.6 m and a width 2 m. After 10 minutes gases in the room have an average temperature of 700 degree Celcius.

  What percent of the particles does the settling tank capture

The setting velocity of a particle is 0.002 m/s and the overflow rate of a settling tank is 0.008 m/s. (a) what percent of the particles does the settling tank capture. If the particles are flocculated so that thie rsettling rate is 0.05 m/s

  Presedimentation-uspended solids concentration of raw revers

Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent per million gallons?

  Find optimal amount of water that will be drawn from well

The town needs a total of 2 mgd. The capacity of well 1 is 5 million gallons per day, and that of well 2 is 10 mgd. Using calculus (hint: calculus with substitution), determine the optimal amount of water that will be drawn from each well

  Find internal energy by neglecting kinetic energy changes

Water is at 9000 kPa and 300 degrees celcius and flows through a partially open valve. Pressure immediately after the valve is measured to be 600 kPa. Calculate the specific internal energy of the water leaving the valve. Neglect kinetic energy ch..

  Determine if the bridge would fail under a given load

Determine if the bridge would fail under a given load. The truck has two axles and the graph should should begin with 1 axle 7 ft into bridge with the other just reaching the bridge.

  Determine hydraulic conductivity of the aquifer in vicinty

The rate of water level change was measured when the water in the auger hole was 5 meters below the water table, and was determined to be 5 cm/s. Determine the hydraulic conductivity of the aquifer in the vicinity of the auger hole.

  Find coefficient of permeability of clay for loading range

A laboratory consolidation test was performed on a clayey soil specimen, which was drained on both top and bottom. The time for 50% consolidation was 6.2 minutes, and the specimen's thickness at 50% consolidation was 0.740 in.

  Determine the speed at which the ball is kicked

The ball at A is kicked such that theta=30 degrees. If it strikes the ground at B having coordinates x=15 ft, y= -9ft, determine the speed at which it is kicked and the speed at which it strikes the ground.

  Find how much existing highway must be reconstructed

The overpass structure is to be level, centered 26 feet above the railroad, and 180 feet long. How much existing highway (in feet) must be reconstructed to provide appropriate vertical alignment

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd