Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
In an experiment to measure convection heat transfer co-efficient, a very thin metal foil of very low emissivity is attached on the surface of a slab of material with very low thermal conductivity. The other surface of the metal foil is exposed to convection heat transfer by flowing fluid over the foil surface.
This setup diminishes heat conduction through the slab and the radiation on the metal foil surface, while heat convection plays a prominent role. The slab on which the metal foil is attached to has a thickness of 25 mm and a thermal conductivity of 0.023W/m.K. In a condition where the surrounding temperature is 20 C, the metal foil is heated electrically with a uniform heat flux of 5000W/m2.
If the bottom surface of the slab is 20 C and the metal foil has an emissivity of 0.02, determine
(a) the convection heat transfer co-efficient if the air is flowing over the metal foil and the surface temperature of the foil is 150 C and
(b) the convection heat transfer co-efficient if water is flowing over the metal foil and the surface temperature of the foil is 30 C.
Air is heated in an adiabatic piston cylinder device at a constant pressure of 100 kPa. The initial specific volume of air is 1 m3/kg. If the volume of the cylinder is increased by 50% in this process, determine the specific entropy change of air in ..
a refrigerant 134a at 140 kpa and -10 degree celcius is compressed by an adiabatic 16kw compressor to an exit state of
ten kilograms of ice at 260 k is dumped into 20 kg of liquid water initially at 300 k in an insulated container. the
A gas turbine power plant operating on an ideal Brayton cycle has a pressure ratio of 7. Determine the back work ratio of this cycle, if the temperature of air at the compressor and the turbine inlet are 300 K and 1300 K respectively. (Consider the v..
a rigid chamber contains 100 kg of water at 500 kpa 100 c. a paddle wheel stirs the water at 1000 rpm with a torque of
question 1 evaluate distribution of shear force bending moment and stress due to bending in the simply supported beam
an aluminum rod is made in the form of a hollow square tube 2.25 in outside with a wall thickness of .120 in. its
Write a description of the generation of the following with reference to diagrams. Dry saturated steam. Super heated steam.
A balanced-cross-flow compact heat exchanger is required for an air heating system that processes 0.5 kg/s air. The inlet temperature for the hot water is 295 K, and the cold air enters at 270 K to be heated to 287 K. The inlet pressure for the hot w..
25 kg of water are placed in a rigid, initially evacuated container which has a volume of 2 m3 . After sitting for some time, the pressure stabilizes at 10.0 bars. What is the specific entropy (kJ/kg K)of the liquid vapor mixture?
the elevator e has a mass of 500kg and the counterweight at a has a mass of 150kg. if the motor supplies a constant
argon gas enters a turbine operating at steady state at 100 bar 325 k and expands adiabatically to 40 bar 235 k with no
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd