Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
a navel gun (E= 30,000 ksi and G = 11,600 ksi) with a bore of 16 in. develops a maximum internal pressure of 20,000 psi. Determine
a. the minimum outside diameter required if the maximum tensile stress permitted in the gun barrel is 36,000 psi.
b. the change inside diameter when the gun is fired if the outside diameter of part a is used.
calculate the depth of water in a stormwater pond resulting from a two hour rainfall event. the rainfall occurs over a 24-acre watershed at an average rate of 1 inch/hour. the runoff coefficient is 0.5.
Dispute in largest open-pit copper mine, My recollection may be skewed, so for our purposes, consider this example a hypothetical, but this is my recollection of a real case. In the early 80s, in Salt Lake County, Utah, a dispute arose involving t..
The inlet of loe pressure turbine is 500Kpa and 500°C. Condenser operates at 10 Kpa. Determine the mass flowrate through boiler needed to produce 5000KW of power.
The void ratio of soil in the borrow pit is 1.12. Estimate the volume of soil (cubic meters) that must be excavated from the borrow pit.
The elastic ball bounces down a flight of rigid stairs. Determine the height h of the steps if all the trajectories between successive steps are identical. Use e=0.85 and the initial velocity 6 m/s.neglect friction.(teta=70 degrees)
an equal-tangent sag vertical curve is designed with the PVC AT STation 109 + 00 and elevation 950 ft, the PVI at station 110 + 77 and elevation 947.34ft,and the low point at station 110 + 50 . Determine the design speed of the curve.
What does under-reinforced mean Which is desirable and why How would your Moment-Curvature plot be affected if the amount of tension steel was doubled How would your Moment-Curvature plot from part a be affected if compression steel was added to the..
A trapezoidal channel is carrying water at a normal depth of 5.2 ft, the channel has a bottom width of 10 ft and side slopes of 2 H to 1 V. It is running on a slope of 0.005 ft/ft. What will be the shear stress in lb/ft^2 exerted on the channel be..
I want to use PESTAN model for a project, can you please tell me any real scenario with available data on which I can formulate a project preferably related to oklahoma.
An industry is illegally discharging benzene into a river. The concentration in the river at the point of discharge is 0.2 mg/L. A drinking water treatment plant (DWTP) is located 1.5 km downstream. The water velocity in the river is 0.35 km/day.
A ladder of mass 20 lbs. is leaned at an angle of 62 degrees against a smooth frictionless wall. What is the magnitude of the reaction (in lb-wt) where the ladder touches the wall?
Determine, for the crest and sag vertical curves required, the stationing and elevation of the PVCs and PVTs given that the PVC of the crest curve(on westernmost level highway section) is at station 0+00 and elevation 100 ft.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd