Determine storage 1hour later if the average rates are given

Assignment Help Civil Engineering
Reference no: EM13309243

The storage in a rectangular section irrigation channel is 20,000 m2 at a given time. Determine the storage 1 hour later if the average rates of inflow and outflow during the hour are 23 and 18 m3/s respectively. The evaporation rate from the surface of the 0.79 ha charnel reach is 26 hectare-m/day. 1 ha = 104m2 Storage change in m3 of the 1 hour (10 points) Depth change in mm of the 1 hr (5 points) Depth increasing or decreasing

Reference no: EM13309243

Questions Cloud

Calculate the difference in elevation from a to b : In trigonometric leveling from point A to point B, the slope distance and the zenith angle measured in A were 2504.897 m and 85o08'54". At B, these measurements were 2504.891 m and 94o52'10" respectively.
How to use the input validation : Requirement Determine if a word is a palindrome Using a cloulread in a word chaster by character Store each character in its own node.
Find her efficiency as a heat engine : A 52-kg mountain climber, starting from rest climbs a vertical distance of 730m. At the top, she is again at rest. Find her efficiency as a heat engine
Ammonia is connected to a refrigeration loop : a tank with 100 kg of ammonia is connected to a refrigeration loop, with a valve that opens to keep the loop at a constant pressure. the ammonia is initially 99% liquid, and the valve is located at the top such that only vapor exists the tank.
Determine storage 1hour later if the average rates are given : The storage in a rectangular section irrigation channel is 20,000 m2 at a given time. Determine the storage 1 hour later if the average rates of inflow and outflow during the hour are 23 and 18 m3/s respectively.
Compute the molar amount of naoh in hcl : Given: NaOh 0.108 M HCl 7.80 mL calculate the molar amount of NaOH used in titration HCl
Define statistical algorithms : Define statistical algorithms and write the flow charts for statistical algorithms for sums, squares and products.
What would be the maximum length of the straw : If you were to drink mercury (13.6g/cm^3) with a straw, what would be the maximum length of the straw
What is the silver ion concentration : What is the silver ion concentration in a solution prepared by mixing 427 mL of 0.385 M silver nitrate with 471 mL of 0.488 M sodium phosphate? The Ksp of silver phosphate is 2.8 × 10-18

Reviews

Write a Review

Civil Engineering Questions & Answers

  Compute force fa on roller and x- and y-components at o

The uniform 30 kg bar OB is secured to the accelerating frame in the 30 degree position from the horizontal by the hinge at O and roller at A. if the horizontal acceleration of the frame is a equals 20 m/s^2

  Calculate the axial stress in the copper and the steel

A steel flat bar of dimensions 4x1x12 inches is PINNED between two copper bars of dimensions 4x2x12 inches at room temp. The PINNED assembly is then cooled by 200 degrees fahrenheit.

  How much power is required to overcome aerodynamic drag

a new sports car has a drag coefficient of 0.30 and a frontal area of 21 ft^2, and is traveling at 119 mi/h. how much power is required to overcome aerodynamic drag if p = 0.002378 slugs/ft^3

  How to determine the head loss caused by the piers

A bridge has cylindrical piers 1 m in diameter and spaced 15 m apart. Downstream of the bridge where the flow disturbance from the piers is no longer present, the flow depth is 2.9 m and the mean velocity is 2.5 m/s.

  Introduction to consolidation settlements

Include immediate and consolidation settlements, but ignore secondary compression. In your calculation, use three sublayers with thicknesses of 4 ft, 8 ft and 16 ft for the top, middle and bottom layers. Ignore any settlement caused by the dense s..

  Determine what manometer reading can be expected

Is this flow laminar. What is the viscosity of the oil. For the same flow in the opposite directio, what manometer reading can be expected.

  Determine the net rate of flow of linear momentum

Determine the net rate of flow of linear momentum through the control surface.

  Derive equations for the shear force and the bending moment

(a) Derive equations for the shear force V and the bending moment M for segments: AB, AC and AD (Place the origin at point A). (b) Plot the shear-force and bending-moment diagrams for the beam using the derived functions.

  How to approximate the number of the 120 intervals

At a specified point on a highway, vehicles are known to arrive according to a poisson process. Vehicles are counted in 20 second intervals, and vehicle counts are taken in 120 of these time intervals.

  Smallest standard commercial pipe

For satisfactory operation, the static pressure at the pump inlet must not be lower than -6 m of water gage. Determine the smallest standard commercial pipe that will give the required performance.

  Will the vc meet minimum ssd standards if speeds limited

A particular crest vertical curve (VC) on US 280 at Shelton Mill Rd has long been criticized as being unsafe. Its length is 400 feet. The prevailing speed on the crest VC is 50 mph. In its present condition, its tangent grades are G1=2 percent and..

  Determine the maximum internal pressure in mpa

The rivets are 10 mm in diameter, spaced a distance s = 24.4 mm apart, and have an average shear strength of 35 MPa. Determine the maximum internal pressure in MPa if the rivets are not to shear.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd