Determine bearing stress in the soil including the weight

Assignment Help Civil Engineering
Reference no: EM13320630

A concrete column with cross-sectional area is A= 120inches squared supports an axial compressive load P=9.0 kip, including the weight of the column. The column is supported by a square spread footing with a depth of 6" and measuring w=25". Determine the bearing stress in the soil. Concrete weighs 150lb/ft cubed

Reference no: EM13320630

Questions Cloud

Determine the amount of air added to the tank in lbm : A rigid tank contains 40 lbm of air in 20 psia and 70 degrees F. More air is added to the tank untill the pressure and temperature rise to 35 psia and 90 degrees F, respectively.
Determine graphically magnitude and direction of resultant : Knowing that the tension is 120 lb in AB and 40 lb in AD, determine graphically the magnitude and direction of the resultant of the forces exerted by the stays at A
Payne company makes two products : Payne Company makes two products, M and N, in a joint process. At the split-off point, 40,000 units of M and 50,000 units of N are available each month.
What are some of the ethical responsibilities : What are some of the ethical responsibilities and obligations that management accountants have within an organization? Provide some examples. Are these responsibilities different than the obligations for financial accountants?
Determine bearing stress in the soil including the weight : A concrete column with cross-sectional area is A= 120inches squared supports an axial compressive load P=9.0 kip, including the weight of the column. Determine the bearing stress in the soil. Concrete weighs 150lb/ft cubed
The expenses and receipts for income : She has had an accountant in the past, but the accountant left her 6 months past and she has been trying to do the accounting work on her own.
List a few of the issues and considerations businesses : List a few of the issues and considerations businesses should have when it comes to the selection of long-term investments and how those issues impact the various financial statements.
Find the emf induced in the inner solenoid : One solenoid is centered inside another. The outer one has a length of 53.0cm and contains 6600 coils, Find the emf induced in the inner solenoid
What type of taxpayers are considered : Heather & Terry have a mortgage on their primary residence of $750,000 and a mortgage on their vacation home of $410,000. In 2013, they incurred $46,400 of mortgage interest expense.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Components of ownership

The IIT components of ownership cost based on average annual value are: Tax-3%, Insurance -4%, and Interest-7%. a) What is the average annual value?

  What will be the new level of service

If an additional 11ft lane is added (each direction) and all other factors stay the same, what will be the new level of service?

  Determine void ratio and unit dry weight of soil particles

A 110 cm^3 sample of wet soil has a mass of 106 g and a degree saturation of 100%. When oven-dried, the mass is 81 g. Determine the 1) water content, 2) specific gravity, 3) void ratio, and unit dry weight of soil particles.

  Chlorination tank for killing microorganisms

You are to design a chlorination tank for killing microorganisms in the effluent from a wastewater treatment plant. It is necessary to remove 99% of active bacteria in a wastewater flow of 120 m 3 /hr.

  What is the deflection on a mercury manometer connected

A pitot-static tube is used to measure the velocity at the center of the pipe. If the fluid velocity is 10 ft/s, what is the deflection on a mercury manometer connected to the pitot-static tube

  Find magnitude of load that is necessary to produce changes

An alloy has a yield strength of 41 ksi, a tensile strength of 57 ksi, and an elastic modulus of 16 X 10^6 psi. A cylindrical specimen of this alloy 0.5 in in diameter and 10 in long is stressed in tension and found to elongate 0.3 in.

  Find the hydraulic conductivity of the aquifer

Drawdown at an observation well 15m from the pumped well is 3.0 m and a drawdown at a second observation well 150 m away is 0.30 m. Find the hydraulic conductivity of the aquifer.

  Determine moment of inertia of beams cross-sectional area

Determine the moment of inertia of the beam's cross-sectional area about the x-axis. Set a = 40mm , b = 130mm , d = 110mm , h = 380mm .

  What would be the void ratio for a total pressure of 800 kn

When the total pressure acting at midheight of a compressible clay layer is 100 kN/m^2, the corresponding void ratio is 1.09. When the total pressure increases to 400 kN/m^2, the corresponding void ratio decreases to 0.89.

  Determine the x-y and z components of reaction at the pin

The member is supported by a pin at A aand a cable BC. If the load at AD is 300 lb, determine the x,y,z components of reaction at the pin A and the tension in cable b c

  Is the calcite precipitating or dissolving in the pore water

A ground water sample has a pH of 7.5, hardness (due to primarily Ca2+) of 100 mg/L, and an alkalinity of 250 mg/L as CaCO3(s). Is the calcite precipitating or dissolving in the pore water

  Determine which process requires more energy at atm pressure

Which process requires more energy: completely vaporizing 1 kg of saturated liquid water at 1 atm pressure or completely vaporizing 1 kg of saturated liquid water at 8 atm pressure

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd