Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Assuming approximately 19,296 data points can be held in memory, with a 21X Datalogger (CR23X Micrologger), capturing battery voltage; panel temperature; 2 thermocouples with max, min, avg, and stdev for each; all every 2 seconds, how long before you fill up the memory? What happens after the memory is full?
Water at a pressure of 13 atm, at street level, flows into a building at 3m/s through a 6 cm diameter pipe. The pipe tapers down to a 2 cm diameter by the top floor 50 m above.
A normally consolidated clay layer in the field has a thickness of 3.2 m with an average effective stress of 70 kN/m^2. A laboratory consolidation test on the clay gave the following results: Pressure (kN/m^2)=100, 200 Void Ratio=0.905, 0.815
At noon on a sunny summer day with a surface wind speed of 4m/s, SO2 is released over rough terrain from a 90m stack at a rate of 400g/s. Assume that the plume rise is 60m.
Calculate the vapor pressure, air pressure, relative humidity, and air density at elevation 1500 m if air temperature is 25 degrees C and dew point temperature is 20 degrees C and the lapse rate is 9 degrees C/km
Estimate the amount of Ca(OH)2(s) leached from concrete during a one-year period by precipitation. Assume that the area receives 40 in/yr of precipitation which is in equilibrium with PCO2= 10^-3.5 atm and [SO42-] = 10^-4 M.
If the maximum (total) depth of water that can be accommodated at the weir is 1m and the width of the channel is 4m, determine the crest height of a suppressed weir that should be used to measure the flowrate.
A new machine will cost $25,000. The machine is expected to last 4 years and have no salvage value. If the interest rate is 12%, determine the return and the risk associated with the purchase.
Replace the given forces by a wrench and determine the coordinates of the intersection of its line of action (the coordinate of point P) with the plate. With a Force Fca=(100i+100j)N coming off of point C
Rigid members ABC and DEF are joined with steel links BE and CF using 25mm pins. The links are made of 25mm thick 50mm wide plates and are single shear. Determine the maximum normal stress in each of links BE and CF
Thin rubber strips are used to provide increasing resistance to orthopedic patients during large motion exercises. The sheets shown are 0.03125 in thick and 3 in. wide. Say the rubber properties are 120 psi and v= 0.47.
You are the Engineer of record for a large heavy construction foundation project in the Boston Harbor Area. What foundation information should you be providing as part of your duties
Compute the energy loss in a 90 degree bend in a steel tube used for a fluid power system. The tube has a 0.5 inch outside diameter and a wall thickness of 0.065 inches. The mean bend radius is 2.00 in. The flow rate of hydraulic oil is 3.5 gal/mi..
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd