Design of the cross-section should be most-economical

Assignment Help Civil Engineering
Reference no: EM131312822 , Length: 9

Individual Assignment- Urban Drainage Design

OBJECTIVE:

Design the drainage system (cross-section of channels) for the particular rainfall and given catchment area.

OUTCOMES:

Design of cross section should be safe for the return period of 25 years or more.

TASKS:

All students are required to submit individual report and make calculations for the collected data. The report should cover the following tasks:

1. Give the detailed introduction, necessity of urban drainage system and uses.

2. Calculate the peak run off rate (m3/s) for the given precipitation (rainfall) and given catchment area by Rational method.

3. For the peak run off, design the section of the canal (trapezoidal, triangular, circular or rectangular).

4. Design of the cross-section should be most-economical.

5. Slope of the channel should be for appropriate velocity that does not create erosion. .

Report Format

- Number of pages: Maximum 10 pages including references list and the appendixes (if any).

- Line spacing: Generally use 1.5 x line spacing.

- Start with the title page (including your name) or student number as requested.

- It is preferable to place figures within the text rather than group them at the end of the report.

- Give a sequential number to all figures (Fig. 1, Fig. 2, Fig. 3, etc.)

- Add a brief, informative caption to the figures.

Report Sections

The Report should contain the following sections:
- Abstract
- Introduction
- Methods of designing (steps)
- Calculations
- Results & Discussion
- Conclusions and Recommendations
- References
- Appendices

The report should not exceed 10 pages, starts from the abstract to the appendix (if any).GUIDELINES:

Follow the guidelines mentioned below during writing your report:
- The report should have a Title Page. Title Page should contain the following information.
 College name and logo
 Title
 Module name and Code
 Student name
 Student ID
- Use page numbers
- Use your own words on writing, Times New Roman font size 12
- Heading should be with Font Size 12, Bold

Attachment:- Drainage Design Excercise.rar

Reference no: EM131312822

Questions Cloud

Federal statutory tax rate : How is it possible for a U.S. firm to have an effective tax rate that is less than the U.S. federal statutory tax rate?
Determine the worst case time-complexity : Evaluate the map() method of your implementation of the Colormap ADT from the previous question to determine the worst case time-complexity.
Breakeven stock price at expiration on the transaction : Consider a stock priced at $30 with a standard deviation of 0.3. The risk-free rate is 0.05. There are put and call options available at exercise prices of 30 and a time to expiration of six months. The calls are priced at $2.89 and the puts cost $2...
Explain why the bonds price declined despite the fact : Suppose that two years ago a 10-year bond in your portfolio was selling for $1,100.- Explain why the bond's price declined despite the fact that 10-year interest rates have declined.
Design of the cross-section should be most-economical : HYDRAULICS - 2 CIVL 0018 - Design the drainage system (cross-section of channels) for the particular rainfall and given catchment area and Design of cross section should be safe for the return period of 25 years or more.
Expect dividends to grow perpetually : Netscrape Communications does not currently pay a dividend. You expect the company to begin paying a $4.6 per share dividend in 8 years, and you expect dividends to grow perpetually at 6.1 percent per year thereafter. If the discount rate is 12 perce..
Relationship between increased social responsibility : What is the relationship between increased social responsibility and IT at the workplace? Answer in about two paragraphs with reference.
Why is it difficult to value a callable bond : Which of the following two bonds has greater reinvestment risk: a 10- year 8% coupon bond or a 25-year zero-coupon bond? Why? Why is it difficult to value a callable bond?
Discuss who would be involved in the response and planning : Consider the scenario of a terror plot to target religious sites in the United States.Since the killing of Osama bin Laden (OBL), Islamic extremists have directed their hate toward the United States. To "get back" at the United States for OBL's de..

Reviews

len1312822

12/15/2016 2:01:43 AM

Dear I attach files for my report I already did the calculations part I want 1 page Abstract , 1 pages Introduction , 3 pages Methods of designing (steps) you need to write about Rational method & manning equstion , then calculsion I already did i want only obtimum method , 1 page Discussion , 1 pages conclusion & finally reference in harravards style .

len1312822

12/15/2016 2:01:17 AM

Task Very weak Weak Good Excellent 1 To 6 ? Very weak understanding and exposition of relevant issues ? A few relevant points but superficial (confusion) ? No evidence – poor understanding of class notes ? Writing quality and flow are bad ? Poor contents and no references ? Weak understanding ? Incomplete contents ? Some awareness but also confusing ? Arguments not clear ? No evidence - too reliant on class notes ? Superficial use and poorly referenced ? Attempts but with errors and omissions ? Shows awareness but limited ? Insufficient evidence ? Insufficient evaluation ? Some good but incomplete references ? Adequate awareness and evidence ? Clear awareness and understanding ? Good writing ? Cover all relevant areas ? Fulfill all requirements ? Good evaluation and synthesis ? Relevant and referenced ? Good source of references

len1312822

12/15/2016 2:01:07 AM

Follow the guidelines mentioned below during writing your report: ? The report should have a Title Page. Title Page should contain the following information. ? College name and logo ? Title ? Module name and Code ? Student name ? Student ID ? Use page numbers ? Use your own words on writing, Times New Roman font size 12 ? Heading should be with Font Size 12, Bold ? Copy and paste from the Internet sources is strictly not acceptable and will be treated as a plagiarism and will be dealt with as per polices given below.

len1312822

12/15/2016 2:00:30 AM

Summarize this paragraph as a general introduction to the topic. Explain in detail o b j e c t i v e s of the study. Should consists of uses of urban drainage system, their importance and need of study with examples and detailed description. You can also add some case studies. Provides a s e q u e n t i a l s t e p s o f d e s i g n i n g t h e d r a i n a g e s y s t e m . Clearly understand the concepts and methods of designing. Takes care of units in designing. Critically analyses the designing.

len1312822

12/15/2016 1:59:49 AM

Report Format - Number of pages: Maximum 10 pages including references list and the appendixes (if any). Line spacing: Generally use 1.5 x line spacing. - Start with the title page (including your name) or student number as requested. It is preferable to place figures within the text rather than group them at the end of the report. Give a sequential number to all figures (Fig. 1, Fig. 2, Fig. 3, etc.) Add a brief, informative caption to the figures. Report Sections - The Report should contain the following sections: •Abstract •Introduction •Methods of designing (steps) •Calculations •Results & Discussion •Conclusions and Recommendations •References •Appendices General Appearance of the report (Format, Title Page, etc.) [10 Marks] General Appearances such as border line margins, font size & type etc. All the mentioned titles not more not less. Standard cover page Same font size & type throughout the report. Include all the mentioned headings (titles) in the report. Omits proper mentioned headings. Different font size & type. ABSTRACT (Maximum Half Page) Consists of not more than 150- 250 words. State the objectives.

Write a Review

 

Civil Engineering Questions & Answers

  Calculate the work required if the process is adiabatic

Helium in a piston/cylinder at 70 F, 20 psia is brought to 720 R in a reversible polytropic process with exponent n = 1.25. You may assume that helium is an ideal gas with constant specific heat. Find the final pressure and both the specific heat ..

  The driver initiates a phisical response to the situation

A driver takes 3.2 sec to react to a complex situation while travelling at a speed of 96km/hr.how far does the vehicle travel before the driver initiates a phisical response to the situation?

  Determine the value of w at which elastic instability

All the members of the symmetrical rigid frame shown in Figure S11.2 are of uniform section. Determine the value of W at which elastic instability of the frame occurs in its own plane.

  What volume of sludge must digester dispose of each year

WHat volume of sludge must they dispose of each year if their sand drying beds yield a solids concentration of 35%

  What will be the new level of service

If an additional 11-ft lane is added (each direction) and all other factors stay the same, what will be the new level of service?

  Determine the resulting couple moment

Calculate the moments M_A and M_B about point A for the forces applied at points A and B. Then, determine the resulting couple moment M_R. Assume that a positive moment produces a counterclockwise rotation whereas a negative moment produces a cloc..

  Design coagulation-flocculation and sedimentation

What effect does removing 70-100 sieve fraction have on the head-loss characteristics and on the depth of expanded bed and Comment on the differences and likely reasons for the differences.

  How many worker deaths above the background cancer rate

You have taken a job at a metal plating plant, and some of the metals you work with contain arsenic as an impurity. The heated metals give off arsenic vapors, which create an average concentration of arsenic of 0.00002 mg/m3 in the air in the workpla..

  How to calculate the asphalt content by weight of mix

The VMA of a mixture is 15.0% and the air voids are 4.0%.If the aggregate has a specific gravity (bulk dry) of 2.700 g/cm3 and percent binder absorbed (by the mass of aggregate) is 0.5%, calculate the asphalt content by weight of mix.

  Determine what must be the magnitude of t

if the resultant of the 1000 lb vertical force and the tensile force T in the cable is to be in the direction of the boom OB, what must be the magnitude of T

  Specify device describing briefly its principle of operation

Specify a device describing briefly its principle of operation, that is typically installed downstream of a bursting disc as an indicator of disc rupture,

  Determine natural circular frequency of disk for oscillation

The mass center of the unbalanced disk of weight W is located at G, which is a distance of R/2 from the center for the disk. In the equilibrium postition, the two springs attached to the rim of the disk are undeformed.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd