Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Water enters a reach of rectangular channel where y1 = 0.5 m, b = 7.5 m, and Q = 20 m3 /s (Fig. P10.39). It is desired that a hydraulic jump occur upstream (location 2) of the sill and on the sill critical conditions exist (location 3). Other than across the jump, losses can be neglected. Determine the following:
(a) Depths at locations 2 and 3
(b) Required height of the sill, h
(c) Resultant force acting on the sill
(d) Sketch the water surface and energy grade line.
(e) Describe the nature and character of the jump
A steam turbine is operating at a steady state with a mass flow rate of 3682 kg/h at the inlet. The power output of the turbine is 8700 kW. Steam enters the turbine at a pressure of 40 bar, temperature of 320 oC, and with a velocity of 13 m/s.
Consider a cold aluminium canned drink that is initially at a uniform temperature of 3°C. The can is 12.5 cm high and has a diameter of 6 cm. The combined convection/radiation heat transfer coefficient between the can and the surrounding air at 25°C ..
the flywheel of a small punching machine rotates at 360 rpm. each punching operation requires 1500 ft-lb of work and it
A steel flywheel 25 mm thick with an outer diameter of 1 m and an inner diameter of 200mm is rotating at 100 hz. Determine the radial and tangential stress distributions as a function of radial position r. Plot the distribution
A gas mixture at 675.0°C and 113 kPa absolute enters a heat exchanger at a rate of 69.0 m3/hr. The gas leaves the heat exchanger at 245.0°C. The change in enthalpy of the gas during the cooling process is -6.80 kJ/mol.
air is drawn into a small open-circuit wing tunnel as shown. atmospheric pressure is 98.7 kpa abs and the temperature
Water vapor is cooled in a closed, rigid tank from 520°C and 100 bar to a final temperature of 270°C. Determine the final pressure, in bar, and sketch the process onT-y and p-y diagrams.
air is compressed from an initial temperature of 20 degc and pressure of 100 kpa to a final pressure of 1000 kpa. the
A steel spur gear has a module of 1 mm and 16 teeth cut on the 20° full-depth system and is to carry 0.15 kW at 400 rev/min. Determine a suitable face width based on an allowable bending stress of 150 MPa. Use the first approximation equation for ben..
Find the maximum allowable stringer spacing if maximum allowable deflection is 1/240 of the span. Draw a sketch of the formwork.
write a main program that outputs position to the SCI channel
a fire hose nozzle has a diameter of 1.500 in. according to some fire codes the nozzle must be capable of delivering at
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd