Compute the cut required at each stake

Assignment Help Civil Engineering
Reference no: EM131147062

Grade stakes for a pipeline running between stations 0 + 00 and 6 + 37 are to be set at each full station. Elevations of the pipe invert must be 843.95 ft at station0 + 00 and 847.22 ft at 6 + 37, with a uniform grade between. After staking an offset centerline, an instrument is set up nearby, and a plus sight of 5.32 taken on BMA (elevation 853.63 ft). The following minus sights are taken with the rod held on ground at each stake: (0 + 00, 5.36); (1 + 00, 5.86); (2 + 00, 5.88); (3 + 00, 6.47); (4 + 00, 7.53); (5 + 00, 8.42); (6 + 00, 8.89); (6 + 37, 9.12); and (A, 5.36). Prepare a set of suitable field notes for this project (see Plate B.6 in Appendix B) and compute the cut required at each stake. Close the level circuit on the benchmark.

Reference no: EM131147062

Questions Cloud

Find the dividend yield and capital gains yield : What if Timco's dividends grow at 6% per year forever?- What if Timco's dividends grow at 6% for one year, than at 10% forever after that?
What types of unemployment may exist : When the economy is at full employment, what types of unemployment may exist? Over the last 100 years, the U.S. labor productivity growth rate experienced its largest declines.
Calculate the firms wacc : Given the following information, calculate the firm's WACC. rd=8%,D0=$2.00, Tax rate=40%, p0=$25, Growth=0%,flotation cost on common equity=15%.
What can be said about deadweight loss in each case : Suppose people freely choose to spend 40 percent of their income on health care, but then the government decides to tax 40 percent of that person's income. What can be said about deadweight loss in each case?
Compute the cut required at each stake : Prepare a set of suitable field notes for this project (see Plate B.6 in Appendix B) and compute the cut required at each stake. Close the level circuit on the benchmark.
Calculate the expected return and the standard deviation : lculate the expected return (), the standard deviation (sp), and the coefficient of variation (CVp) for the portfolio profiled in Table 1. Provide your answers with calculations.
Calculate invert elevations at each 50-ft station : Determine the uniform grade needed, and calculate invert elevations at each 50-ft station.
Compare the theories behind juvenile sex offenders : Compare and contrast the theories behind juvenile sex offenders. Discuss the growing problem of sexting and the laws behind this type of pornography
Which countries has highest average tax rate relative to gdp : Which of the following countries has the highest average tax rate relative to GDP? If a lump-sum tax is imposed, the slope of the new budget line relative to the budget line prior to the tax.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Calculate the true stress for fracture in the neck region

A copper wire breaks under an engineering stress of 43x10^3 psi. Its ductility is 77%it reduction area. Calculate the true stress (in psi) for fracture in the neck region.

  Complete max demand calculation for fully ac hospital

Complete a maximum demand calculation for a fully air conditioned hospital with the following electrical equipment and outlets.  500, 28W lamps  200, 14W lamps 400, 10A socket outlets 5, 18A, 3 phase, air conditioning units

  Derivation of economical span of a bridge

Derivation of economical span of a bridge

  Duplex system with no redundancy

What is the salt usage for each regeneration if the system regenerated every 10 days? What size resin tanks (diameter, height) would be required for a duplex system with no redundancy?

  A jar test has shown that the optimum dose

A jar test has shown that the optimum dose of ferric chlorideconsumes all of the alkalinity. If the amount of the ferricchloride that is in excess is 10 mg/l, how much lime(Ca(OH)2) in mg/l must be added to neutralize the acidformed.

  Determine the horizontal deflection of joint c

Each member of the truss shown is made of steel (Est = 200GPa) and has the cross- sectional area shown. If the applied load P on point E is 40 kN, determine the vertical deflection of joint C by using Castiglione's second theorem.

  Determine the final temperature and boundary work

Determine the final temperature and the boundary work done during this process.

  What would be amount in moles if the container held nitrogen

A container with volume 0.2 m^3 holds oxygen and has gages showing readings of 70°C and 25 bars. Calculate the amount of oxygen (mass and moles) in the container if the atmospheric pressure is 1 bar.^3

  What were the overall heat-transfer coefficients before and

The diameter of the fermenter is 3 m. The fermenter is mixed using a turbine impeller 1 m in diameter at 60 rpm. The fermentation broth has the following properties: bulk viscosity = 5 x 10^-5 Pa*s, density is 1000 kg/m^3, and thermal conductivity of..

  Estimate the rate of heat transfer from the compressor

50 kmol per hour of air is compressed from p1 = 1.2 bar to P2 = 6.0 bar in a steady-flow compressor. Delivered mechanical power is 98.8KW. Temperature and velocities are: T1= 300K T2= 520K u1= 10m s^-1 u2= 3.5m s^-1

  Describe the difference between population standard

describe the difference between population standard deviation and sample standard deviation. describe a scenario in

  Determine the maximum possible precipitation at new york

Determine the maximum possible precipitation at New York City that may be encountered on a 100 mi^2 drainage area over a 96 hr period.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd