Compressive force that may be applied on cylinder

Assignment Help Mechanical Engineering

Reference no: EM13718472

A 120cm x 80cm plate is rolled into a 120cm long cylindrical shell (Using a 2cm overlap joint to create the cylinder). The shell wall thickness is 1.2mm. The material is AL-2024-T4. Calculate the maximum axial compressive force that may be applied on the cylinder. (Assume uniform stress distribution in the wall). The safety factor is 2.5

Reference no: EM13718472

Questions Cloud

One cubic meter of argon initially : One cubic meter of argon initially at 300 K is compressed such that the change in the specific enthalpy is -0.27 kJ/kg-K and the temperature is reduced 100 K. Determine the final volume of the argon. (k = 1.67)

Power required to operate this air-conditioning system : An air-conditioning system operating on the reversed Carnot cycle is required to transfer heat from a house at a rate of 727 kJ/min to maintain its temperature at 21°C. If the outdoor air temperature is 39°C, determine the power required to operate t..

Due to global climate change scientist predict : Due to global climate change scientist predict the earth’s atmospheric temperature will increase as much as 8°F in the next 100 years. Estimate the overall energy increase [kJ] in the atmosphere this temperature rise will cause. Consider the thicknes..

What is the effectiveness of the heat exchanger : A concentric tube, i.e. tube-in-tube, heat exchanger uses water at 15 °C to cool ethylene glycol from 100 °C to 60 °C. The water and glycol flow rates are each 0.5 kg/s. The specific heat of glycol and water are 2637 J/kg-K and 4180 J/kg-K, respectiv..

Compressive force that may be applied on cylinder : A 120cm x 80cm plate is rolled into a 120cm long cylindrical shell (Using a 2cm overlap joint to create the cylinder). The shell wall thickness is 1.2mm. The material is AL-2024-T4. Calculate the maximum axial compressive force that may be applied on..

Torque required to produce a maximum shearing stress : Find the torque required to produce a maximum shearing stress of 16,500 psi in a solid circular steel shaft with a diameter of 0.875 in.

Difference between a sensor less esc and sensored esc : What is the difference between a sensor less esc and sensored esc? Which ones can be programmed auto messily and or by controller?

A spring on a rod hangs from the ceiling : A spring on a rod hangs from the ceiling and has a 100kg collar attached to the other end, also riding on the rod. The collar is 3m below the ceiling. The collar is attached to a string that passes diagonally through a pulley near the ceiling height,..

Space between the disc and surface is filled with a fluid : A disc with radius, R, rotates (at an angular speed of [omega]) near a surface that is fixed. The space between the disc and surface is filled with a fluid that has viscosity, µ. The distance between the disc and surface is h. Find the dependence bet..

User Account

All Pages