Compare the specific fuel consumption for the outcastes

Assignment Help Mechanical Engineering
Reference no: EM131175189

An eight-cylinder, four-stroke diesel engine of 229 mm bore. 304 mm stroke, and compression ratio 14/1, has an output of 375 kW at 750 reviling. The volumetric efficiency is 78%, the mechanical efficiency is 90%. and the air-fuel ratio is 25/I. If the impel for the pumping loop is 0.345 bar, calculate the impel for the working loop. The engine is now fitted with an exhaust-driven turbo-blower which delivers air to the cylinders at 1.43 bar. The compression ratio is reduced to 13/I and the measured volumetric efficiency is 102%. It can he assumed that the exhaust pressure remains constant and equal to 1.011 bar, and that the imp of the main loop ts directly proportional to the mass of air induced. Calculate the hp which can be expected if the speed and mechanical efficiency remain the same. Compare the specific fuel consumption for the outcastes. if the air-fuel ratio for the supercharged engine is Mt, I. The air conditions are 1.013 hat and 15°C.

Reference no: EM131175189

Questions Cloud

What will you do when you gather evidence of an incident : What are the categories of audit standards you will use? What will you do when you gather evidence of an incident? Why do you need to know the positions of duties of IS employees as well as managers in terms of evidence collection?
Explain basics of the rfid components that were chosen : Explain Basics of RFID components that were chosen. Impact of implementation - A description of administrative procedures - human and process changes; any Changes in Organization policies or enhancements to include training requirements.
Bank within two business days : Your debit card is stolen, and you report it to your bank within two business days. How much money can you lose at most?
Mid-size firm pension fund management team : Congratulations. You have been promoted to vice president and director of your mid-size firm's pension fund management team located in Cincinnati, OH. Before you have even had the opportunity to settle into your new office, your senior vice presid..
Compare the specific fuel consumption for the outcastes : Calculate the hp which can be expected if the speed and mechanical efficiency remain the same. Compare the specific fuel consumption for the outcastes. if the air-fuel ratio for the supercharged engine is Mt, I. The air conditions are 1.013 hat an..
Price and each of the independent variables : a) Prepare a scatter plot showing the relationship between the price and each of the independent variables. b) If the jeweler wanted to build a regression model using only one independent variable to predict price, which variable should be used?
What ate the air-fuel ratios at maximum power : Plot to a base of air-fuel ratio graphs of by and specific fuel consumption. What ate the air-fuel ratios at maximum power and maximum economy!
Describe the essential characteristics of a bond : Describe the essential characteristics of a bond. - Summarize call provisions and sinking fund provisions. Explain how these types of provisions individually make bonds more or less risky for a) an investor, and b) the issuer.
What its sustainable growth rate : If the Hunter Corp. has an ROE of 10 and a payout ratio of 18 percent, what is its sustainable growth rate?

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Bade on a snowplow turns

The blade on a snowplow turns the wet snow through an angle of 120- but off to one side at 30-. If the snow has a density of 500 kg/m3, what power is needed to move the blade at 40 mi/h if it scoops snow that is 15-cm deep and 3-m wide?

  A 500in wide x 25in thick flat steel plate steps down to a

a 5.00in wide x .25in thick flat steel plate steps down to a width of 2.50in and is subjected to axial force. there is

  Quarterly demand for flowers at a wholesaler

Quarterly demand for flowers at a wholesaler are as shown. Forecast quarterly demand for year 5 using: 1. simple exponential smoothing with α=0.1 2. using Holt's model with α=0.1 and β=0.1

  Find the viscosity of the emulsion

You are asked to measure the viscosity of an emulsion, so you use a tube flow viscometer, with the container open to the atmosphere. The length of the tube is 10 cm, its diameter is 2mm, and the diameter of the container is 3 in.

  What future implications do you see developing how does the

how did computers impact the field of engineers and technologiststechnicians? what future implications do you see

  Dislocation loop in form of circle-specify burgers vector

Sketch a dislocation loop in the form of a circle and specify the Burgers vector. Show portions of the dislocation that are screw-like and those that are edge-like in nature. Considering the energy per unit length of the screw dislocation being somew..

  An ideal vapor-compression refrigeration system operates

An ideal vapor-compression refrigeration system operates at steady state with Refrigerant 134a as the working fluid. Superheated vapor enters the compressor at 30 lbf/in2, 20F, and saturated liquid leaves the condenser at 140 lbf/in2. The refriger..

  Axes at the rod center of mass

Determine the required force and moment components at the grip, A, necessary to do this. Establish axes at the rod's center of mass G, with + z upward, and + y directed along the axis of the rod toward A.

  Free convection across the air space

If the building and storm windows are at 20 and -10oC, respectively, what is the rate of heat loss by free convection across the air space?

  If the crest of a hill has a radius of curvature

If the crest of a hill has a radius of curvature i = 200ft, determine the maximum constant speed at which the car can travel over it without leaving the surface of the road. Neglect the size of the car in the calculation. The car has a weight of 3500..

  Assuming the process is working correctly draw and label a

a stream of humid air containing 1.00 mole water vapor and the balance dry air is to be humidified to a water content

  If mechanical friction and wind resistance are neglected

an automobile having a mass of 2 mg travels up a 7 degree slope at a constant speed of v100 kmh. if mechanical friction

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd