Already have an account? Get multiple benefits of using own account!
Login in your account..!
Remember me
Don't have an account? Create your account in less than a minutes,
Forgot password? how can I recover my password now!
Enter right registered email to receive password!
Water leaves a treatment plant in a 450-mm diameter ductile-iron pipeline at a pressure of 600 kPa and at a flow rate of 0.5 m^3/s.
a) If the elevation of the pipeline at the treatment plant is 125 m, estimate the pressure in the pipeline 1 km downstream where the elevation if 110 m. Hint: Use the Colebrook equation to estimate f, and the energy equation to estimate P2 .
b) Assess whether the pressure in the pipeline would be sufficient to serve the top floor of a 10-story building at a height of 38 m. Hint: Use the energy equation again to find your new P. Check whether this pressure is adequate for service.
Set up a table showing curve elevations at the PVC, at the PVT, and at the half-station points along the curve. Compute the station and elevation of the curve turning point.
water flows from a lake as is shown in fig. p8.40 at a rate of 4.0 cfs. is the device inside the building a pump or a turbine? Explain and determine the horsepower of the device. neglect all minor losses and assume the friction factor is .025
Determine the effective size as well as the uniformity coefficient and coefficient of curvature for each soil. Determine also the percentages of gravel, sand, silt, and clay according to (a) ASTM, (b) AASHTO, (c)USCS, and (d) the British Standard.
If the fracture were planar in shape, having an average opening of 2 mm, what would the new value of Hc be?
Water is flowing in a trapezoidal channel with 10 ft bottom width and 2H/IV side slopes. The channel is running on a slope of 0.00778 ft/ft and the flow exerts a shear stress of 1.5 lbs/ft2 on the channel bed. What is the depth of flow in this cas..
Briefly describe electron and hole motions in a p-n junction for forward and reverse biases;
Water with a static pressure of 1.96kN/M2 flows through an 800 mm diameter pipe. A pitot tube pressure gage in this pipe reads a pressure of 5.88 kN/M2. How do you determine the volume flow rate (Q) of the water? (Q = 1.40 M^3/sec, V=2.79 M/sec)
Given the following data for a vertical curve of a road; G1=-2.5%, G2=+5.5% and station of PVI=250+50.At station 252+50, the vertical curve must intersect an existing road at elevation 48.48ft. the elevation on the tangent section at station 256+5..
A balloon is being inflated at the rate of 15m^3/min. At what rate is the diameter increasing after 5 min? Assume that the diameter is zero at time zero.
consider x and y independant Gaussian random variables with zero means and unity variance. 1. for an arbitrary new random does the following hold p(x,y/z)= p(x/z)p(y/z)? 2. let z= x+y. write the explicit expression of the pdf p(x,y/z). use the Dir..
A student counted 92,90,92,91,93, and 91 paces in six trials of walking along a course of 200 ft known length on level ground. Then 85,86,86 and 84 paces were counted in walking four repititions of an unknown distance AB.
The velocity along a pathline is given by V (m/s) = s^2 x t^(1/2) where s is in meters and t is in seconds. The radius of curvature is 0.5 m. Evaluate the acceleration along and normal to the path at s = 2m and t = 0.5 seconds.
Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!
whatsapp: +1-415-670-9521
Phone: +1-415-670-9521
Email: [email protected]
All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd