User Account

All Pages

Change in internal energy and enthalpy of oxygen

Assignment Help Mechanical Engineering
Reference no: EM13708861

Oxygen at 450K is heated to 850K. Assume oxygen as an ideal gas. Determine the change in internal energy and enthalpy of oxygen per unit mass, using:

A) Data for line over u and line over h from the oxygen table (Method 1)

B) Average specific heat values (Method 2)

Reference no: EM13708861

Questions Cloud

Density and volume flow rate of nitrogen at the exit : Nitrogen flows steadily through a pipe with a constant cross-section area of 6cm^2. The nitrogen enters the pipe at 500 kPa and 50 degrees Celsius with a velocity of 15m/s. The nitrogen leaves the pipe at 200 kPa and 25 degrees Celsius. Assume that t..
Change in total internal energy and enthalpy of metal block : A 10 kg metal block initially at 200 degrees Celsius and 1 MPa is heated to 500 degrees Celsius and 100 MPa. The metal block has a density of 2000kg/m^3 and a specific heat of 2kJ/kg*K. Calculate the change in the total internal energy and enthalpy o..
Atmosphere is connected to a major artery : A vertical tube open to the atmosphere is connected to a major artery in the arm of a person. To what maximum height does the blood rise in the tube? Take SG blood = 1.04, and the systolic blood pressure of the individual to be 120 mm-Hg.
Find the net upward force on the inflated balloon : A rubber balloon has a mass of 1500 g when it is deflated, i.e., empty. When the balloon is filled up with Helium gas (He = 0.18 kg/m3 ), it takes the form of a sphere with a 4 m diameter. (V-sphere= (4/3)(pi)(r)^3) Find the net upward force on the i..
Change in internal energy and enthalpy of oxygen : Oxygen at 450K is heated to 850K. Assume oxygen as an ideal gas. Determine the change in internal energy and enthalpy of oxygen per unit mass, using: Data for line over u and line over h from the oxygen table
What is the work done on or by the steam : A piston-cylinder contains 0.1 kg of superheated steam at 180 ¯ C and 5.0 bars. The piston is frictionless and freely floating. Heat is added until the final volume is twice the initial volume.
Creating a grid and specifying the intial flow velocity : Need to get flow around cylinders in a channel by creating a grid and specifying the intial flow velocity.
Radius of moons orbit relative to the earth : What is the total change in velocity required to go from a 200 km altitude circular, Earth orbit to circular orbit with a radius of 384,000 km (the mean radius of moons orbit relative to the earth, but ignore the moons presence}?
What are the fin efficiency and effectiveness : Aluminium fins of triangular profile are attached to a plane wall whose surface temperature is 250 oC. The fin base thickness is 2 mm, and its length is 6 mm. The system is in ambient air at a temperature of 20 oC, and the surface convection coeffici..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Determine the natural frequency of vibration

the lower end of the 30 kg slender rod is displaced a small amount and released from the rest. determine the natural frequency of vibration. the springs have stiffness of 500 N/m and they are stretched when the rod is hanging vertically.

  Determine the work and heat transfer per unit mass each in

in a piston cylinder assembly refrigerant 134a undergoes a constant pressure process from saturated vapor at 8 bar to

  An air-standard cycle with variable specific heats is

an air-standard cycle with variable specific heats is executed in a closed system and is composed of the following four

  The crate slides down the section of the spiral ramp such

the crate slides down the section of the spiral ramp such that r 0.5z ft and z 100 - 0.1t2 ft where t is in seconds.

  Thermocouples were made by using copper-constantan wires

During a lab demonstration, two thermocouples were made by using copper-constantan wires. The junction diameter of one thermocouple is 1 mm, while the other is 0.2 mm. Initially, both thermocouples were held in a constant-temperature environment and ..

  Under a tensile stress of 890 mpa the atomic separation

in the absence of stress the center-to-center atomic separation distance of two al atoms is 0.286 nm. under a tensile

  Determine the resulting stress equations

Determine the resulting stress equations for σx, σy and τxy given the Airy's stress function ? = a1x^4 + a2(x^3)y + a3(x^2)(y^2) + a4x(y^3) + a5(y^4), where ai are constants. Also determine, if any, the restrictions between constants.

  Are the wall taps used to measure static pressure of air

In the wind tunnel experiment, four wall taps are used to measure pressure. Are those wall taps used to measure pressure of the air very close to the wall surface? What is the velocity of air close to the wall surface? Are the wall taps used to measu..

  Problem 110degc water is flowing in a 10-mm diameter smooth

problem 110degc water is flowing in a 10-mm diameter smooth tube. the mass flow rate of the water is 0.15 kgs. the

  What are the heat transfer and work in the process

Two kg water at 120C with a quality of 25% has its temperature raised 20C in a constant volume process. What are the heat transfer and work in the process?

  What size reactor is needed for operation at same temperatur

You need to hydrolyze 500 lb/day of an ester at an initial concentration of 5 molar in basic, aqueous solution. The ester has a MW of 120. The product must be 99% hydrolyzed. In bench top experiments at 40C, it is found that 50% of the ester hydrolyz..

  The density of liquid oxygen at 95 k is around 500 kgm3 if

liquid oxygen is stored in a thin-walled spherical container 0.8 m in diameter which is enclosed within a second

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

Submit Assignment

Academics

Major Subjects

Majors

Get In Touch

whatsapp: +1-415-670-9521

Phone: +1-415-670-9521

Email: [email protected]

TERMS & POLICIES

HELP & SUPPORT

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd