Calculate the magnitudes of the force f

Assignment Help Civil Engineering
Reference no: EM131036315

The parallelogram linkage shown moves in the vertical plane with the uniform 8-kg bar EF attached to the plate at E by a pin which is welded both to the plate and to the bar. A torque (not shown) is applied to link AB through its lower pin to drive the links in a clockwise direction. When θ reaches 60° the links have an angular acceleration and an angular velocity of and respectively For this instant calculate the magnitudes of the force F and torque M supported by the pin at E.

1743_8a7b6565-3229-4ccb-a922-20e17f0c73d3.png

Reference no: EM131036315

Questions Cloud

Gulf of tonkin resolution : Why and how did the USA get involved in the war in Vietnam? What was the Gulf of Tonkin Resolution? Why did President Lyndon Johnson propose it and why did Congress pass it? Do you think the USA should have sent troops to Vietnam? Why or why not?
Calculate the minimum effective coefficient of friction : Calculate the minimum effective coefficient of friction μ which will permit the front wheels of the mower to lift off the ground as the mower starts to move forward.
Predict the annual salaries of employees : A statistics student wants to predict the annual salaries of employees at one large company. He wants to know if he can use the number of years that someone has worked at the company to predict his or her annual salary.
Predict the annual salaries of employees : A statistics student wants to predict the annual salaries of employees at one large company. He wants to know if he can use the number of years that someone has worked at the company to predict his or her annual salary.
Calculate the magnitudes of the force f : torque (not shown) is applied to link AB through its lower pin to drive the links in a clockwise direction. When θ reaches 60° the links have an angular acceleration and an angular velocity of and respectively For this instant calculate the magnit..
Calculate the magnitudes of the force f : torque (not shown) is applied to link AB through its lower pin to drive the links in a clockwise direction. When θ reaches 60° the links have an angular acceleration and an angular velocity of and respectively For this instant calculate the magnit..
Gulf of tonkin resolution : Why and how did the USA get involved in the war in Vietnam? What was the Gulf of Tonkin Resolution? Why did President Lyndon Johnson propose it and why did Congress pass it? Do you think the USA should have sent troops to Vietnam? Why or why not?
Predict the annual salaries of employees : A statistics student wants to predict the annual salaries of employees at one large company. He wants to know if he can use the number of years that someone has worked at the company to predict his or her annual salary.
Compute the bending moment m exerted : The uniform horizontal rod has a mass of 20 kg and is welded to the block at B. Friction in the guide is negligible. Compute the bending moment M exerted by the weld on the rod at B

Reviews

Write a Review

Civil Engineering Questions & Answers

  What is the pressure drop per unit length along the tube

It is known that the velocity distribution for steady, laminar flowin circular tubes (either horizontal od vertical) isparabolic. Consider a 10 -mm- diameter horizontal tubethrough with ethyl alcohol is flowing with a steady mean velocity.15 m/s.

  What are the heat addition rate in the combuster and the

A “Cold Air-Standard Brayton cycle” gas-turbine power plant delivers a net power output of 60 MW to an electric generator. The compressor intake temperature is 300 K and the maximum temperature in the cycle is 1200 K.

  Calculate the total friction force exerted by the road

A 3220-lb car enters an S-curve at A with a speed of 60 mi/hr with brakes applied to reduce the speed to 45 mi/hr at a uniform rate in a distance of 300 ft measured along the curve from A to B.

  Define when the oil will be free of contamination

An oil storage area abandoned 19 yrs ago had oil spilled on the ground and saturated the soil at a concentration of 400mg/kg of soil. A recent soil sample shows a concentration of 20mg/kg.

  Under what situation shall engineers use jacking at one end

Sometimes the side of concrete bridges is observed to turn black in colour. What is the reason for this phenomenon? In prestressing work, if more than one wire or strand is included in the same duct, why should all wires/strands be stressed at the sa..

  Calculate the required total station reading towards b

Two control points A "station" (1000E, 1000N) and B "backsight" (594.22E, 877.68N) are available within the area. Indicate the procedure to satisfy the orientation and calculate the required total station reading towards B.

  Determine the components of reaction at hinge a

The 90lb door has its center of gravity at G. A)Determine the components of reaction at hinge A if hinge B resists only forces in the x and y directions and A resists forces in the x,y,z directions.

  A man says that the oil was reduced at a rate

An oil storage area abandoned 19 yrs ago had oil spilled on the ground and saturated the soil at a concentration of 400mg/kg of soil. A recent soil sample shows a concentration of 20mg/kg

  Find bod reaction rate constant of a municipal waste water

If the BOD5 of a municipal wastewater is 310 mg/L and the BODU is 340 mg/L, determine the BOD reaction rate constant (base e). What would be the 3 day 30°C BOD Assume, temperature coefficient = 1.047.

  Advantages and disadvantages of various training strategies

Depending on the needs and understanding the applications, technology, and operations of your organization will help in making the right decisions when acquiring an EHR system

  Determine what is the final concentration of cfu-l

A hypothetical water treatment train consisting of coagulation/flocculation unit, filtration unit and chlorination system is used to treat surface water characterized by bacterial concentration of 800,000 CFU/L.

  Find fuel consumption miles per liter for city driving cycle

A car has the following characteristics: weight = 18000 N; cross-sectional area = 2.5 m^2, drag coefficient = 0.5; rolling friction coefficient = 0.02. The energy content of gasoline is 3.5E10^7 Joules/Liter.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd