Calculate the fraction of water that is condensed from air
Course:- Chemical Engineering
Reference No.:- EM131158112

Expertsmind Rated 4.9 / 5 based on 47215 reviews.
Review Site
Assignment Help >> Chemical Engineering

Air at 90°C and 1.00 atm (absolute) contains 10.0 mole% water. A continuous stream of this air enters a compressor-condenser, in which the temperature is lowered to 15.6°C and the pressure is raised to 3.00 atm. The air leaving the condenser is then heated isobarically to 100°C. Calculate the fraction of water that is condensed from the air, the relative humidity of the air at 100°C, and the ratio m3 outlet air at 100°C/m3 feed air at 90°C.

Put your comment

Ask Question & Get Answers from Experts
Browse some more (Chemical Engineering) Materials
An LiClIfiO solution at 298.15 K (25°C) is made by adiabatically mixing cool water at 283.15 K (10°C) with a 20-mol-% LiC1/H20 solution at 298.15 K (25°C). What is the compo
Ten kmol per hour of air is throttled from upstream conditions of 298.15 K (25°C) and 10 bar to a downstream pressure of 1.2 bar. Assume air to be an ideal gas with Cp = (7/
Zirconium is one of the few metals that retains its structural integrity upon exposure to radiation. The fuel rods in most nuclear reactors therefore are often made of zirco
The doctor wants to find out the exact time at which the concentration of this antibiotic in the blood peaks in the patient. Determine this time and the concentration of the
For the following cases: How much energy is lost every day when the steam temperature is maintained at 200oC, and the surrounding average air temperature is 20.0oC, and the su
Methanol can be manufactured by the gas phase reaction CO(g) + 2H2(g)?CH3OH(g)at 400K and 1.013 bar.The following data are available;?H298= -90.71 kJ/mol?G298= -24.33 kJ/mol
Let both the actuator and the sensor signals be in the range 0 to 5 V, and let 1C of the temperature variable correspond to 0.02 V. Design the hardware and software architec
If the motor is operating on load with a power angle of -20°, and the excitation is adjusted so that the excitation voltage is equal in magnitude to the terminal voltage, de