Calculate the force acting on a window facing the storm

Assignment Help Civil Engineering
Reference no: EM13313201

the wind reaches a speed of 27.8 m/s in a storm. calculate the force acting on a 1m x 2m window facing the storm. the window is in a high-rise building. the air density p= 1.2 kg/m3.

Reference no: EM13313201

Questions Cloud

What is the mark-to-market profit or loss : What is the mark-to-market profit or loss (in dollars) that you will have on each date?
What is the total energy stored in the capacitor : A 4.5 %u03BCF capacitor initially has a charge magnitude Q = 2.0 x 10-8 C. What is the total energy stored in the capacitor
What is the dry unit weight the saturated unit weight : What is the dry unit weight, the saturated unit weight, and the buoyant unit weight, of a soil having a ratio of 0.5 and a value of Gs of 2.7
Plot the shape of the water surface from the center : a whirlpool is modeled as the combination of a free and a forced vortex. the maximum velocity in the whirlpool is 10 m/s, and the radius at the juncture of the free and the forced vortex is 10m.
Calculate the force acting on a window facing the storm : the wind reaches a speed of 27.8 m/s in a storm. calculate the force acting on a 1m x 2m window facing the storm. the window is in a high-rise building. the air density p= 1.2 kg/m3.
What is your effective borrowing rate : Suggest a strategy for borrowing the $100 million. What is your effective borrowing rate?
Find what is the angular misclosure of the link traverse : The azimuth from station A of a link traverse to an azimuth mark is 212o 12' 36". The azimuth from the last station of the traverse to an azimuth mark is 192o 12' 15". Angles to the right are observed at each station
Estimate the rate of change in the water surface elevation : The river flow at an upstream gauging station is measured to be 1500 m3/s, and at another gauging station 3 km downstream, the discharge is measured to be 750 m3/s at the same instant of time.
Determining financial strategies to sustain investor : Write a paper of determining financial strategies to sustain investor relations.

Reviews

Write a Review

Civil Engineering Questions & Answers

  Find probability that a radndomly selected thermometer reads

assume the readings on thermometers are normally distibuted with a mean of 0C and a standard feviation of 1.00C. Find the probability that a radndomly selected thermometer reads greater than 1.23 and draw a sketch of the region.

  Calculate pressure in point 1 nd density of manometric fluid

A U manometer reads 20 cm air as operating fluid and a given manometric fluid. A single branch closed tube reads 35 cm connected to point 1. If P2 = 1.2 ATM calculate the pressure in point 1 and the density of the manometric fluid.

  Calculate the amplitude f0 of sinusoidal excitation force

calculate the amplitude F0 of the sinusoidal excitation force that is necessary to produce a steady-state vibration with a velocity amplitude of 10 m/s at resonance

  Determine the volume of water infiltrated on the field

a 30-acre field received 4 inches of rain with 35% runoff.Determine the volume of water infiltrated on the field ( assume all the water that doesn't runoff infiltrates )

  What force should be applied at the lower edge of the plate

A square plate of uniform thickness has a side length of 25 cm that hangs vertically from hinges at its top edge, When horizontal jet strikes the plate at its center, the plate is deflected and comes to rest at an angle of 30o to the vertical.

  Sketch and label vi-vo and vn versus time

An inverting amplifier is implemented with a R1=10 kilo Ohms and R2= 100 Kilo Ohms, and an op amp with finite open-loop gain a=10^3 V/V. Sketch and Label Vi,Vo,and Vn versus time if Vi is a 1-kHz triangular wave

  Determine humidity ratio-dew point and mass of dry air

An air-water vapor mixture at 0.1 MPa, 35 C and 70% relative humidity occupies a volume of 100 m^3 Determine the humidity ratio, the dew point, the mass of dry air in the volume and the mass of water vapor in the volume.

  Find the gauge pressure at a second point in the line

At one point in a pipeline, the water's speed is 3.00 m/s and the gauge pressure is 4.00×10^4 Pa. Find the gauge pressure at a second point in the line 11.0 m lower than the first if the pipe diameter at the second point is twice that at the first..

  How to design the curve of the roadway at station

An equal tangent vertical curve is to be constructed between grades of -3.0% (initial) and 1.0% (final). The PVI is at station 110+00 and elevation 420 ft. Due to a street crossing the roadway, the elevation of the roadway at station 112+00 must b..

  Determine the couple m required to hold the system

the pin at B is attached to member ABC and can slide freely along the slot cut in the fixed plate. Neglecting the effect of friction, determine the couple M required to hold the system in equilibrium when.

  Determine the cycle time for a single engine scraper

Determine the cycle time for a single engine scraper rated at 21 cy heaped that is used to haul material from a pit to a fill 900 ft away under severe conditions. The average haul speed will be 14 mph and the average return speed will be 20 mph.

  Discuss energy storage scheme from a conversion efficiency

an electrical-generation utility sometimes pump liquid water into an elevated reservoir during periods of low electrical consumption. this water is used to generate electricity during periods when the demand for electricity exceeds the utilities a..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd