Calculate the draught

Assignment Help Mechanical Engineering
Reference no: EM131242755

A tunnel of square cross section, 8 m × 8 m, has a weight (above water) of 50 ton per meter length. The tunnel is being floated to its destination, with its two ends closed by temporary sheets. Calculate the draught (the depth of the bottom below water).

2344_3595d9d4-7961-4116-9b81-ec872de10c86.png

Reference no: EM131242755

Questions Cloud

Identify potential ethical issue at real-world organization : Identify a potential ethical issue at a real-world organization. You may use the organization and issue you used in the first and second assessments.
Value proposition in patient care : Paradise Hospital, Inc. is a for-profit hospital. As the facility's new hospital administrator, you have been tasked with improving the service value of the hospital. The administration has not done this process since the hospital began operating ..
The process related to the completion of the biblical canon : Explain and clarify the process (chronologically), noting key dates, persons, and other pertinent data for the discussion.
What factors do you consider when doing an intervention plan : How does the prison environment influence the way you manage a case? What is case management assessment and case management goal setting? Is there a relationship between the two? What factors do you consider when doing an intervention plan? How do yo..
Calculate the draught : A tunnel of square cross section, 8 m × 8 m, has a weight (above water) of 50 ton per meter length. The tunnel is being floated to its destination, with its two ends closed by temporary sheets. Calculate the draught (the depth of the bottom below ..
How the recommended corporate policy is socially responsible : Assess how the recommended corporate policy is socially responsible. Support the recommended policy with well-reasoned analysis and specific examples.
Elements of internal and external environment : What elements of internal and external environment contributed to Facebook's success? Which elements of internal/external context create challenges for facebook?
Determine which is more applicable across range of situation : Write a one to two page paper in which you determine which is more applicable across the widest possible range of situations: process modeling or configuration management. Be sure to explain your rationale.
Determine the minimum cover of sand : The tunnel of the previous problem is sunk into a trench that has been dredged in the river bottom, and then covered with sand. The volumetric weight of the sand is 20 kN/m3. Determine the minimum cover of sand necessary to prevent floatation of th..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Using air properties for the combustion gases and assuming

combustion gases enter a gas turbine at 627 degc and 1.2 mpa at a rate of 2.5 kgs and leave at 527degc and 500 kpa. it

  What temperature does the piston fall below the stops

A vertical cylinder fitted with a piston contains air initially at 120kPa and 100C. The piston is restrained by a set of stops. The piston diameter is 0.1m, its mass is 5kg, and the ambient pressure and temperature are 100kPa and 20C. The cylinder is..

  Plot the line impedance as a function of distance

At the frequency at which the line operates, the reactance of the load is -j50 Ω and the phase constant on the line is 20π rad/m. Calculate and plot the line impedance as a function of distance from load.

  Question regarding the larson-miller parameter

If the Larson-Miller parameter correctly correlates the data, a plot of data at constant stress (therefore constant P) of log (t) versus 1/T also would be a straight line.

  Calculate athe heat lost by the oil and the cooling water

hot oil cp2.3 kjkg.c at a rate of 2.5 kgs enters an adiabatic exchanger at 180 c and leaves at 150 c. cooling water

  Derive the variation of transmitted x-ray intensity as a

derive the variation of transmitted x-ray intensity as a function of incident intensity thickness density and mass

  Find the moment of inertia and natural frequency

Find the moment of inertia and natural frequency of a vertical cantilever pipe 12 feet tall with outer diameter of 4.5 inches and an inner diameter of 4.25 inches.

  Is this vertical maximum higher

What will be his highest elevation? If his jump angle is increased to 30deg, will he stay in the air longer? Is his horizontal jump longer? Is this vertical maximum higher?

  The fuel mass flow rate is 60 kgmin assume that the plant

a gas turbine power plants operates using methane as fuel and 200 excess air. fuel and air enter the plant at 25

  Find speed of wind and tension in string

find speed of wind and tension in string?? (density=1. 25kg/mcube)

  The temperature surrounding the dmm is 30 degrees c the

a type e thermocouple is placed in an oven and connected to a dmm. the temperature surrounding the dmm is 30 degrees

  Determine the work and the heat transfer in the process

A piston/cylinder arrangement contains water of quality x = 0.7 in the initial volume of 0.1 m3, where the piston applies a constant pressure of 200 kPa. The system is now heated to a final temperature of 200°C. Determine the work and the heat tr..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd