Calculate the critical radius and the number of stable

Assignment Help Mechanical Engineering
Reference no: EM13948246

1. (a) Assume for the solidification of nickel (Problem 10.4) that nucleation is homogeneous, and the number of  stable  nuclei  is 106 nuclei per cubic meter. Calculate the critical radius and the number of stable nuclei that exist at the following degrees of super- cooling: 200 K and 300 K.

(b) What is significant about the magnitudes of these critical radii and the numbers of sta- ble nuclei?

2. For some transformation having kinetics that obey the Avrami equation (Equation 10.17), the parameter is known to have a value of 1.5. If, after 125 s, the reaction is 25% com- plete, how long (total time) will it take the transformation to go to 90% completion?

Reference no: EM13948246

Questions Cloud

Driving force for the formation of spheroidite : 1. Briefly cite the differences between pearlite, bainite, and spheroidite relative to micro structure and mechanical properties. 2. What is the driving force for the formation of spheroidite?
Costing system in the world in manufacturing firms : Why do you think standard costing is the most widely used costing system in the world in manufacturing firms, even though more sophisticated systems might be available? Discuss.
Transform the 2 relations into domain/key normal form : Transform the following 2 relations into Domain/Key Normal Form (DK/NF). Make and state the appropriate assumptions about functional dependencies and domains.
Should the company keep the old computer : Madison Company is considering replacing its existing mainframe computer with a new model manufactured by a different company. Compute NPV of each alternative. Should the company keep the old computer, or buy the new one?
Calculate the critical radius and the number of stable : 1. (a) Assume for the solidification of nickel (Problem 10.4) that nucleation is homogeneous, and the number of  stable  nuclei  is 106 nuclei per cubic meter. Calculate the critical radius and the number of stable nuclei that exist at the followi..
What are the elements of capital in corporations : What are the elements of capital in corporations? What is the difference between a loan awarded to the company and the company issuing stock to shareholders? what would a debt/equity ratio tell you about a company?
How would this breech affect the valuation of the stock : When a company has a formal Ethics Policy and does something contrary to that policy, what impact might it have on the value of the stock, the employees, investors, regulators, and other stakeholders? How would this breech affect the valuation of the..
Approximate eutectoid temperature of alloy : A steel alloy is known to contain 93.65 wt% Fe, 6.0 wt% Mn, and 0.35 wt% C. (a) What is the approximate eutectoid temperature of this alloy? (b) What is the proeutectoid phase when this alloy is cooled to a temperature just below the eutectoid?
How do financial markets value securities : Once a common stock has been listed on the stock market, like the New York Stock Exchange, what causes the price of the stock to go up or down? Who benefits when the price goes up on a stock? Expound on as many factors as you can that will drive the ..

Reviews

Write a Review

Mechanical Engineering Questions & Answers

  Two charges -18 c and 49 c are fixed in place and separated

two charges -18 c and 4.9 c are fixed in place and separated by 4.2 m. a at what spot along a line through the charges

  This process continues untilthe pressure in the tank falls

an insulated tank containing 0.4 m3 of saturated water vapor at 500kpa is connected to an initially evacuated

  Determine the exit temperature

Air at 90 kpa and -7 C enters an adiabatic diffuser steadily with a velocity of 180 m/s and leaves with a low velocity at a pressure of 100 kpa. The exit area of the diffuser is 5 times the inlet area. Determine (a) the exit temperature and (b) th..

  Determine mass flow rate of air through the nozzle

Air enters an adiabatic nozzle steadily at 300 kPa, 200oC, and 30 m/s and leaves at 100 kPa and 180 m/s. The inlet area of the nozzle is 80 cm2. Determine Mass flow rate of air through the nozzle.

  Design parameters for the containment vessels are as

select a steel for use in high-pressure cylindrical containment vessels for the next generation of nuclear submarines.

  Determine the flight angle

The die characteristic is Q_x = 0.0015p where p is the head pressure in psi. Determine the flight angle that maximizes the flow rate Q_x and graph it.

  Helium is throttled from 12 mpa 20degc to a pressure of

helium is throttled from 1.2 mpa 20degc to a pressure of 100 kpa. the diameter of the exit pipe is so much larger than

  Determine the net work done per cycle

If the peak pressure and peak temperature of the cycle are 4.8 MPa and 2500, determine the net work done per cycle (kJ/kg) and the cycle thermal efficiency .

  Draw the free-body diagram and write the corresponding

draw the free-body diagram and write the corresponding elemental equation for a spring element with the following

  The water velocity is 20 cms the inside heat transfer is in

hot water at 98degc flows in a schedule 40 horizontal steel pipe and is exposed to atmospheric air at 10degc. the water

  What is the water outlet temperature

What is the water outlet temperature - Evaluate water properties at an assumed average mean temperature, Tm = 300 K.(b) Was the assumed value for Tm reasonable?

  The humidity ratio leaving the cooling coil

Hot, moist outside air passes over a cooling coil, from which it exits in a saturated state at p=14.7lbf/in^2 and T=65F. The air is then mixed adiabatically with room air at p=14.7lbf/in^2, T=75F, phi=25%.

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd