Calculate the air flow required in cfm to transfer

Assignment Help Civil Engineering
Reference no: EM13207582

Calculate the Air flow required in CFM to transfer 5,396 BTU/Hour in an HVAC duct given that the temperature difference (Delta-T) between the room and the supply air is 21 DegF.

Use the values for air's Specific Heat and Density given in the first Lab.

 

Reference no: EM13207582

Questions Cloud

Calculate the water or cement ratio of the cement paste : Calculate the water/cement ratio of the cement paste in which all the cement will hydrate to leave no capillary pores. (density of cement: 3.1 g/cm3) ?
The initial length of an aluminum sample : The initial length of an Aluminum sample is 11.3 cm, and the ductility of Al %EL = 40 %. If this sample undergoes a tensile test until fracture, what is the fracture length of this sample in cm?
Specify the amount of convective acceleration : shaped nozzle such that the velocity along the center line of the flow increased from 1.5 m / s to 15 m / s at a distance of 37.5 m. specify the amount of convective acceleration at the beginning and end of the range.
As a result of the introduction of the cotton gin, : As a result of the introduction of the cotton gin,
Calculate the air flow required in cfm to transfer : Calculate the Air flow required in CFM to transfer 5,396 BTU/Hour in an HVAC duct given that the temperature difference (Delta-T) between the room and the supply air is 21 DegF.
Economics often guides health policy : Some people would argue that economics often guides health policy. Identify a public health program you believe has been impacted in a negative manner because of the current economy?
Role in responding to abusive customers : Emotional intelligence is one’s ability to detect and manage emotional cues and information. How might emotional intelligence play a role in responding to abusive customers?
What is the steady state level of capital per worker : Now, suppose that initially z=2 and the economy is in the steady state you calculated in part a. . Then suppose that z falls to 1.8 permanently. What is the new steady state? Determine capital per worker znd output per worker in each of the first ..
Determine how would the individual demand curves shift : What is the algebraic equation for this curve d) Now suppose I1 increases to 1100 and I2 decreases to 900. How would the market demand curve shift How would the individual demand curves shift

Reviews

Write a Review

Civil Engineering Questions & Answers

  Working of real estate salesperson

You are a real estate salesperson working for Good Earth, Realtors, Inc. You receive 50 percent of all commissions received by the firm (net of MLS fees) for which you were either the listing agent or the selling agent.

  Thermo-gravimetry of calcium oxalate

Evaluate the percent mass loss for each of the three thermal events indicated on the attached TGA trace

  Calculate the forces exerted by the water on the bend

Water flows through a horizotal 45 deg reducing bend with a 36 inch. diameter upstream and a 24 inch diameter downstream, at the rate of 20 cfs under a pressure of 15 psi at the upstream end of the bend. Neglecting head loss in the bend, calculate..

  Presedimentation-uspended solids concentration of raw revers

Presedimentation can reduce the suspended solids concentration of raw river water from 500 mg/L to 200 mg/L. How many pounds of dry solids does this represent per million gallons?

  Define concentration of pollutant in the effluent leaving

A lagoon with volume 1200 m^3 has been receiving a steady flow of a conservative waste at a rate of 100m^3/day for a long enough time to assume that steady-state conditions apply

  Calculating sand shear strength

Estimate the effective friction angle for the sand (assume c' = 0). Calculate the sand's shear strength (τf) on a horizontal plane at depths of the 20 ft and 50 ft.

  Installation of motor on pw criterion

At the end of 15 years, the first motor will have a salvage value of $50 and the second motor will have a salvage value of $100. consider the MARR to be 8%. (note : 1HP=0.7457 kw). Determine which motor should be installed based on the PW criterio..

  Photovoltaic array and under insolation conditions

Photovoltaic array, Under insolation conditions of 500 W/m^2 (direct sunlight), and 10% solar cell efficiency

  Define introduction to management science

Introduction to management science, The Dynaco Manufacturing Company produces a particular product in an assembly line operation. One of the machines on the line is a drill press that has a single assembly line feeding into it.

  Coefficient of permeability of concrete

How does aggregate size influence the coefficient of permeability of concrete? List other factors that determine the permeability of concrete in a structure.

  Constant head permeability test

A constant head permeability test was conducted on a clean sand sample. The diameter and length of the test specimen were 10 cm and 12 cm respectively.

  Calculate equivalent pipe size and flow in the pipe

The first pipe of 0.4-m diameter is 500 m long, the second pipe 600 m long, size 0.3 m, and the last pipe is 500 m long of diameter 0.2 m. If the elevation difference between two reservoirs is 30 m, calculate equivalent pipe size and flow in the p..

Free Assignment Quote

Assured A++ Grade

Get guaranteed satisfaction & time on delivery in every assignment order you paid with us! We ensure premium quality solution document along with free turntin report!

All rights reserved! Copyrights ©2019-2020 ExpertsMind IT Educational Pvt Ltd